|
|
Fluid Flow in RH Reactor Under Different Parameters of Immersion Tubes |
GENG Dianqiao,LEI Hong,HE Jicheng |
Key Laboratory of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang 110004, Liaoning, China |
|
|
Abstract The homogeneous model was used to study the fluid flow in RH reactor with different parameters of immersion tubes. While the immersion tubes are located eccentrically, larger eddies appear near the down immersion tube at the bottom of vacuum chamber, under free surface of vacuum chamber and in ladle, but no obvious effect on the recirculation flow rate was observed. While the distance between two tubes is decreased, the recirculation flow rate decreases, and the recirculation near the left wall of the vacuum chamber is enhanced. The recirculation flow rate increases with the immersion depth. In order to increase the recirculation flow rate, either the immersion depth of immersion tubes should be reduced or the distance between immersion tubes,should be increased and if slag entrapment should be avoided at same time.
|
Received: 01 January 1900
|
|
|
|
[1] |
DAI Jing-xin1,DING Xue-yong1,XU Hai-fa2,LIU Cheng-hong1,JU Tian-hua1. Numerical simulation of conveying characteristics of dense phase pulverized coal in bend pipe[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 377-385. |
[2] |
ZOU Tao1,ZHAN Dong-ping1,ZHANG Hui-shu2,LI Da-liang3,HAN Jian-lin3,LIU Xi-feng3. Mathematical and physical experimental study on mould nozzle optimization in slab continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 304-310. |
[3] |
Shuang-jiang Li. Numerical simulation of the effect of nozzle nodule on the behavior of molten steel in slab continuous casting mold[J]. , 2020, 45(3): 0-0. |
[4] |
. Flow field simulation and control structure optimization of two-strand T-ship tundish[J]. , 2020, 45(2): 0-0. |
[5] |
CHEN Xu-ling, ZHENG Ru-yue, FAN Xiao-hui, GAN Min, HUANG Xiao-xian, JI Zhi-yun. Numerical simulation model of temperature and NOx emission in flue gas circulating sintering process[J]. Iron and Steel, 2020, 55(2): 23-30. |
[6] |
YI Ya-li, HAN Xiao-kai, ZHANG Lei, JIN He-rong. Homogeneity of grain structure for 316L/EH40 stainless steel clad plate during hot rolling process[J]. Iron and Steel, 2020, 55(1): 47-55. |
|
|
|
|