|
|
Application of Dynamic Control System With OffGas Analysis to 60 t Converter |
LIU Kun1,LIU Liu1,HE Ping1,FU Bo2,LI Fenggong2 |
1. Department of Metallurgical Technology, Central Iron and Steel Research Institute, Beijing 100081, China; 2. Steelmaking Plant, Laiwu Iron and Steel Group Co., Ltd., Laiwu 271126, Shandong, China |
|
|
Abstract The application of dynamic control system with offgas analysis to the 60ton topblown converter at Laiwu Iron and Steel Group Co., Ltd. is introduced. The main contents include the configuration of hardware system, data collection and communication, standardization of blowing process and dynamic control models.The following results were obtained: the hitting rates of carbon and temperature were 89% and 71% respectively, the simultaneous hitting rate of both C and T was 64% when the end point carbon content and temperature were in the range of 008%0.24% and 15801660 ℃, with an accuracy of controlling C and T were ±0.025% and ±20 ℃ respectively;In order to increase the simultaneous hitting rate of both end point carbon and temperature, it is necessary to improve the management of raw materials, carry out charging according to the charging model, adopt standardized operation and especially apply topbottom combined blowing technique.
|
Received: 01 January 1900
|
|
|
|
[1] |
CHEN Deng-fu, XU Pei, LONG Mu-jun, DUAN Hua-mei, YANG Jie, WU Shi-xin. Development and investigation of advanced process model for secondary cooling in continuous casting of molten steel[J]. Iron and Steel, 2020, 55(3): 40-49. |
[2] |
YANG Jian,HU Zhen- wei,MENG Hong- ji. Dynamic secondary cooling model for continuous casting billets based on surface temperature measurements[J]. , 2019, 31(2): 113-116. |
[3] |
YANG Wen- yuan,FENG Chao,WANG Ming- lin,L Ying- hua,HU Yan- bin,PENG Xiao- yan. Water model experiment of high supplying oxygen blowing in large converter[J]. , 2017, 29(10): 807-815. |
[4] |
LI Ming-ming,,LI Qiang,,ZOU Zong-shu,. Slag-metal-gas interaction characteristics of top-blown BOF steelmaking process[J]. Chinese Journal of Iron and Steel, 2015, 27(4): 19-24. |
[5] |
WAN Xue-feng,CAO Dong,LI De-gang,LIAO Xiang-wei,WANG Li-juan,CHANG Gui-hua. Technical Study and Practice on Deep Dephosphorization With Double Slags in Converter in Ansteel[J]. Iron and Steel, 2012, 47(6): 32-36. |
[6] |
WU Ming,SHI Zhi-ji. Practice of Steelmaking With High Silicon Hot Metal Using Offgas Analysis and Dynamic Control Techniques[J]. Iron and Steel, 2012, 47(12): 30-32. |
|
|
|
|