|
|
|
| Study on cleanliness of IF steel first slab |
| WANG MIN |
| |
|
|
|
|
Abstract The cleanliness of IF steel first slab produced by BOF-RH-CC and the difference with the cleanliness of normal slab were studied by means of total oxygen and nitrogen content analysis, SLIME, SEM, EDS, etc.. It was found that the T[O] and [N] of first slab were obviously decreasing along casting direction The large-sized inclusions contents of first slab were obviously higher than those of normal slab, and were generally decreasing along casting direction, and were close to those of normal slab after the position of 4.4m along first slab. The distribution of large-sized inclusions was non-homogeneous along thickness direction of slab, which contents of inner arc slab were obviously higher than those of outer arc slab. The size of large-sized inclusions were mainly from 140μm to 300μm and the size over 300μm, which accounted individually for 22.6% and 56.8% of total large-sized inclusions and were from slag entrapment in mould or tundish, reoxidation products and stuffing sand.
|
|
Received: 06 August 2009
|
|
|
|
| [1] |
HOU Xin-mei, LIU Yun-song, WANG En-hui. Effect of ladle-lining refractory on non-metallic inclusions in steel[J]. Iron and Steel, 2020, 55(6): 15-24. |
| [2] |
YU Hui-xiang, PAN Ming, YANG De-xin. Behavior of inclusions in ultra-low carbon IF steel during deoxidation and alloying process[J]. Iron and Steel, 2020, 55(6): 46-53. |
| [3] |
NIU Kai-jun, YANG Wen, ZHANG Li-feng, CHU Yan-ping, ZHANG Hong-qi, GUO Zi-qiang. Thermodynamics and industrial practice of formation of inclusions during solidification of tire cord steels[J]. Iron and Steel, 2020, 55(6): 61-67. |
| [4] |
YAN Xue-qiang1,2,ZHENG Wan1,2,WANG Guo-wei1,2,YAN Wen1,LI Guang-qiang1,2. Effect of microporous MgO refractories on steel cleanliness[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(6): 483-490. |
| [5] |
LI Lan-xin1,WANG Min1,JUAN Rong-fei1,BAO Yan-ping1,YANG Jin2. Distribution characteristics of oxides and sulfide inclusions in key areas of gear steel forgings[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 370-376. |
| [6] |
LI Xiao-yuan,SHI Jie. Ballistic behavior of high strength steel targets during high speed impact of projectile[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 429-436. |
|
|
|
|
2010, Vol. 45 
