|
|
Study of Ti-deoxidation process and inclusions precipitation behavior with high-efficient and economic H-beam steel used in building |
|
|
|
Abstract The morphology, chemical composition, size and type of inclusions were investigated in H-beam steel with different deoxidation technology and the effect of Ti content on the inclusions precipitation was analyzed by thermodynamic calculation and laboratory experiment. On this basis, deoxidation process of Ti was practiced in the producing process of H-beam steel used in building in No.3 steelmaking and rolling plant of Maanshan Iron and Steel Co..The quality of products was compared with that under the existing technology. The results showed that the contents of dissolved oxygen and total oxygen in steel were relatively low, inclusions were small and was plastic, the reject rate of rolled products descend and the mechanical properties of products are enhanced.
|
Received: 13 March 2009
|
|
|
|
[1] |
HOU Xin-mei, LIU Yun-song, WANG En-hui. Effect of ladle-lining refractory on non-metallic inclusions in steel[J]. Iron and Steel, 2020, 55(6): 15-24. |
[2] |
YU Hui-xiang, PAN Ming, YANG De-xin. Behavior of inclusions in ultra-low carbon IF steel during deoxidation and alloying process[J]. Iron and Steel, 2020, 55(6): 46-53. |
[3] |
NIU Kai-jun, YANG Wen, ZHANG Li-feng, CHU Yan-ping, ZHANG Hong-qi, GUO Zi-qiang. Thermodynamics and industrial practice of formation of inclusions during solidification of tire cord steels[J]. Iron and Steel, 2020, 55(6): 61-67. |
[4] |
LI Lan-xin1,WANG Min1,JUAN Rong-fei1,BAO Yan-ping1,YANG Jin2. Distribution characteristics of oxides and sulfide inclusions in key areas of gear steel forgings[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 370-376. |
[5] |
QIN Zheng-feng, XUE Zheng-liang, LI Jin-bo, LI Bo-si. Origin of large spherical or bar-shaped inclusions in calcium treated steel[J]. Iron and Steel, 2020, 55(5): 31-38. |
[6] |
WANG Yi, ZHANG Li-feng, REN Ying, REN Qiang. Mechanism of inclusion evolution during refining process of 37Mn5 steel production[J]. Iron and Steel, 2020, 55(5): 39-44. |
|
|
|
|