|
|
|
| Effect of Different Technological Factors on Inclusion Removal in RH Degasser |
| GENG Dian-Qiao Ji-Cheng HE |
| |
|
|
|
|
Abstract The numerical method was employed to study the effect of technological factors on the inclusion removal in RH degasser. The numerical results indicated that for small inclusion, the number density can be decreased effectively by collision growth. For big inclusion, the number density can be decreased by Stokes floatation. The inserting depth of the snorkels, the vacuum chamber pressure and the gas flow rate are three key parameters of inclusion removal and the gas flow rate is the most important one. The inclusion removal rate is up 6 percent while the inserting depth of the snorkels decreases from 800mm to 300mm. The inclusion removal rate is up 12 percent while the vacuum chamber pressure decreases from 5.0kPa to 1.0kPa. The inclusion removal rate can reach 75 percent while the gas flow rate is up to 2000NL. Inclusions larger than 20μm can be removed after RH treatment if gas flow rate is up to 1275NL, but it can not promote the removal rate of inclusions greater than 10μm effectively if the gas flow rate is greater than 1750NL.
|
|
Received: 10 November 2008
|
|
|
|
| [1] |
DAI Jing-xin1,DING Xue-yong1,XU Hai-fa2,LIU Cheng-hong1,JU Tian-hua1. Numerical simulation of conveying characteristics of dense phase pulverized coal in bend pipe[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 377-385. |
| [2] |
ZOU Tao1,ZHAN Dong-ping1,ZHANG Hui-shu2,LI Da-liang3,HAN Jian-lin3,LIU Xi-feng3. Mathematical and physical experimental study on mould nozzle optimization in slab continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 304-310. |
| [3] |
Shuang-jiang Li. Numerical simulation of the effect of nozzle nodule on the behavior of molten steel in slab continuous casting mold[J]. , 2020, 45(3): 0-0. |
| [4] |
. Flow field simulation and control structure optimization of two-strand T-ship tundish[J]. , 2020, 45(2): 0-0. |
| [5] |
CHEN Xu-ling, ZHENG Ru-yue, FAN Xiao-hui, GAN Min, HUANG Xiao-xian, JI Zhi-yun. Numerical simulation model of temperature and NOx emission in flue gas circulating sintering process[J]. Iron and Steel, 2020, 55(2): 23-30. |
| [6] |
YI Ya-li, HAN Xiao-kai, ZHANG Lei, JIN He-rong. Homogeneity of grain structure for 316L/EH40 stainless steel clad plate during hot rolling process[J]. Iron and Steel, 2020, 55(1): 47-55. |
|
|
|
|
2009, Vol. 44 
