|
|
|
| Experimental Study on Inclusion Removing Efficiency of CSP Tundish |
| ZHU Zheng-Hai PENG Shi-Heng |
| |
|
|
|
|
Abstract Appropriate measures must be taken to strictly control inclusion content in the molten steel during the product process of electric steel because the inclusion in final steel product can remarkably influence on its properties especially for electric steel which has strictly requirements for the purity of molten steel. In this paper the authors investigate the category, content and granularity distribution of inclusion in continuous casting tundish when CSP was used to produce electric steel in Ma Steel. Then analyse and evaluate the inclusion removing capability of CC tundish. The results by test show that the CC tundish after rebuilding and optimization can almost remove inclusion larger than 40m in liquid steel, and provide assembling and growing kinetic condition for inclusion less than 30m. The tundish has powerful capability of inclusion removing, which guarantees that high-quality electric steel can be produced.
|
|
Received: 06 October 2008
|
|
|
|
| [1] |
HOU Xin-mei, LIU Yun-song, WANG En-hui. Effect of ladle-lining refractory on non-metallic inclusions in steel[J]. Iron and Steel, 2020, 55(6): 15-24. |
| [2] |
YU Hui-xiang, PAN Ming, YANG De-xin. Behavior of inclusions in ultra-low carbon IF steel during deoxidation and alloying process[J]. Iron and Steel, 2020, 55(6): 46-53. |
| [3] |
NIU Kai-jun, YANG Wen, ZHANG Li-feng, CHU Yan-ping, ZHANG Hong-qi, GUO Zi-qiang. Thermodynamics and industrial practice of formation of inclusions during solidification of tire cord steels[J]. Iron and Steel, 2020, 55(6): 61-67. |
| [4] |
LI Lan-xin1,WANG Min1,JUAN Rong-fei1,BAO Yan-ping1,YANG Jin2. Distribution characteristics of oxides and sulfide inclusions in key areas of gear steel forgings[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 370-376. |
| [5] |
QIN Zheng-feng, XUE Zheng-liang, LI Jin-bo, LI Bo-si. Origin of large spherical or bar-shaped inclusions in calcium treated steel[J]. Iron and Steel, 2020, 55(5): 31-38. |
| [6] |
WANG Yi, ZHANG Li-feng, REN Ying, REN Qiang. Mechanism of inclusion evolution during refining process of 37Mn5 steel production[J]. Iron and Steel, 2020, 55(5): 39-44. |
|
|
|
|
2009, Vol. 44 
