|
|
Combustion and Heating Characteristics of Baker of 120 t AOD Furnace |
YUAN Ling1,ZHU Miaoyong1,CHEN Jie2 |
1.School of Materials and Metallurgy, Northeastern University,Shenyang 110004, Liaoning, China; 2.Stainless Steel Branch of Baosteel, Shanghai 201900, China |
|
|
Abstract By means of STARCD commercial software, the temperature distribution of 120 t AOD ( Argon and Oxygen Decarburization ) furnace lining during baking process and the combustion characteristics of the baker were investigated with numerical simulation, and the predicted results were validated by actual measurements. The results show that the maximum temperature of AOD furnace lining after baking could reach 1380 K, and the biggest temperature difference in the same circle direction was 20 K. The temperature at the side close to the outlet is relatively high. The biggest temperature difference in height was 40 K, and the temperature in the lowermiddle part was relatively high. The small flow rate and lower temperature of the off gas in AOD led to nonuniform temperature distribution of the wall. The present baking effect was not satisfactory. The simulation results were in good agreement with the measured.
|
Received: 01 January 1900
|
|
|
|
[1] |
DAI Jing-xin1,DING Xue-yong1,XU Hai-fa2,LIU Cheng-hong1,JU Tian-hua1. Numerical simulation of conveying characteristics of dense phase pulverized coal in bend pipe[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 377-385. |
[2] |
ZOU Tao1,ZHAN Dong-ping1,ZHANG Hui-shu2,LI Da-liang3,HAN Jian-lin3,LIU Xi-feng3. Mathematical and physical experimental study on mould nozzle optimization in slab continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 304-310. |
[3] |
SI-Jun LI du jinjinke. Numerical Simulation Study on Single-point Unequilibrium Casting for Beam Blank in Laiwu Iron and Steel Company[J]. , 2020, 45(3): 0-0. |
[4] |
Shuang-jiang Li. Numerical simulation of the effect of nozzle nodule on the behavior of molten steel in slab continuous casting mold[J]. , 2020, 45(3): 0-0. |
[5] |
. Flow field simulation and control structure optimization of two-strand T-ship tundish[J]. , 2020, 45(2): 0-0. |
[6] |
CHEN Xu-ling, ZHENG Ru-yue, FAN Xiao-hui, GAN Min, HUANG Xiao-xian, JI Zhi-yun. Numerical simulation model of temperature and NOx emission in flue gas circulating sintering process[J]. Iron and Steel, 2020, 55(2): 23-30. |
|
|
|
|