|
|
|
| Study of Combustion Technology of New Top Combustion BF Stove |
| CHEN Guanjun1，HU Xiongguang1，QIAN Kai1，MA Jinfang2 |
| 1Shougang Research Institute of Technology, Beijing 100041, China； 2Shougang Qiangang Company, Qian’an 064404, Hebei， China |
|
|
|
|
Abstract Based on imported Russian Kalugin top combustion BF stove in Shouqin, analyzing the advantages and disadvantages of it, different structures of BF stove were designed. The angle of gas and air jets, reasonable structure of BF stove were studied then through simulation and experiment, a suitable design was accepted and tested. Simulation and test indicates that new developed BF stove is of compact structure,simple in design, has lower temperature at top and wall. The operation indicated that the BF stove runs well, blast temperature satisfies ironmaking. Such BF stove technology could be used to design large high temperature stove.
|
|
Received: 01 January 1900
|
|
|
|
| [1] |
BI Chuan-guang, HUANG Chun-chao, NING Xiao-jun, ZHANG Jian-liang, WANG Guang-wei, PENG Zheng-fu. Best ratio of semi-coke for blast furnace injection[J]. Iron and Steel, 2020, 55(6): 25-32. |
| [2] |
YUAN Ya-qiang,HE Zhi-jun,HAN Xiao,ZHANG Feng-hao,ZHAN Wen-long,ZHANG Junhong. Combustion characteristics of sintering fuel in quasi particles[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 386-392. |
| [3] |
WU Hao, ZOU Chong, HE Jiang-yong, WANG Wei-an, LIU Zhan-wei, SHI Shuai. Difference of combustion performance between different pyrolytic char and pulverized coal injection in blast furnace[J]. Iron and Steel, 2020, 55(4): 12-19. |
| [4] |
SUN Ming-han, ZHU Zhi-wang, ZHENG Li-kang, ZHENG Chuan-xing, DU Feng-shan. Mechanism of oblique edge crack formation of cast-rolling strip[J]. Iron and Steel, 2020, 55(4): 60-67. |
| [5] |
JIANG Da-jun. Influence of fuel structure on sintering character and comprehensive effect[J]. Iron and Steel, 2020, 55(2): 31-41. |
| [6] |
GU Jia-xin1,LIAN Fa-bo1,YANG Jian1,GAO Ming-xin2,SONG Hua1,FU Li-hua1. Flow and temperature fields of molten pool during flow distribution process in twin-roll casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(1): 44-51. |
|
|
|
|
2009, Vol. 44 
