|
|
Control of R2 grade TMBP Surface Roughness in Two-Stand Temper Mill Rolling |
|
|
|
|
Abstract Relying on the product development tasks of R2 grade TMBP (tin mill black plate) in a CAPL line, through whole sampling of strip in trial production and off-line measurement of three-dimensional topography on surface, the genetic and change laws of surface roughness in two-stand temper mill rolling were revealed by ways of industrial test methods. The prediction model of genetic and change laws were established by the use of stepwise regression method based on a large number of measured data. According to the variation of strip surface roughness obtained from the experiment and the prediction model, the process strategy, set models and process parameters of roughness control were set up, furthermore a set of roughness control technology of R2 grade TMBP were obtained. Applied the technology to actual production, the R2 grade TMBP was successfully developed at the first time in China. The roughness control accuracy of R grade TMBP was significantly increased, the pass rate which meet the roughness accuracy window [0.37µm,0.47µm] come to 65.33%, color difference after roll spreading was effectively removed, enormous economic and social benefits were created.
|
Received: 02 March 2010
|
|
|
|
[1] |
SUN Chao-fan, FANG Yuan, WANG Ya-qing, LIU Wei. Influence of temper rolling reduction rate on microstructure and mechanical properties of TS290 steel[J]. Iron and Steel, 2020, 55(6): 75-79. |
[2] |
ZHANG Xinning. Effect of graphite nodules on fracture of ductile cast iron #br#
under low temperature impact loading[J]. Iron and Steel, 2019, 54(9): 110-115. |
[3] |
GUO Junli,WEN Guanghua,FU Jiaojiao,TANG Ping,GU Shaopeng. Evaluation of carbon equivalent calculation of continue#br#
casting steel based on surface roughness[J]. Iron and Steel, 2019, 54(8): 187-193. |
[4] |
BAI Zhen-hua1,2, XU Ji-shuan1, DONG Hang-zhe1, SHEN Li-tao1. Roller roughness attenuation model in leveling rolling process[J]. Iron and Steel, 2019, 54(4): 43-48. |
[5] |
TANG Wei, DU Feng-shan, WEN Jie, LIN Hai-hai. Research and application of warping control strategy on tinplate[J]. Iron and Steel, 2019, 54(12): 55-61. |
[6] |
MA Bingzhi1,QI Chunyu1,LOU Decheng1,ZHANG Yudong2. Surface roughness control technology of galvanized sheet skinpass rolling process[J]. Iron and Steel, 2019, 54(10): 91-95. |
|
|
|
|