|
|
Curvature Analysis for Plate During Hot Leveling |
WANG Yong-qin,LIU Zhi-fang,YAN Xing-chun |
The State Key Lab of Mechanical Transmission, Chongqing University, Chongqing 400030, China |
|
|
Abstract The basic mathematical model of curvature analysis was built for the plate during leveling process. The model was solved with the numerical algorithm successfully with quick speed and well convergence. The research results can be shown as follow: the difference of the contact angles between the plate and the several front rollers is larger than that of the rest, this difference diminished gradually with the movement of the plate, but there is a little influence on trajectory for different initial curvatures; the plate with different initial curvatures tends to be flat with the action of the same rolling reduction; the imposed and residual stresses distributions represent polygon lines, the residual stress can be controlled in a small range after leveling.
|
Received: 11 February 2011
Published: 16 January 2012
|
|
|
|
[1] |
ZHENG Zhong, WANG Yong-zhou, LU Yi, GAO Xiao-qiang. Intelligent optimization model and system of plate and slab design of medium steel plate[J]. Iron and Steel, 2020, 55(4): 53-59. |
[2] |
WANG Guo-fu, YU Hai-feng. Discussion about on-line pickling technology of medium plate of special metal and alloy[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(1): 18-. |
[3] |
LI Rong-feng,XU Liang,ZHANG Shu-yan. Application of the high speed drilling method of residual stress on thick wall pipeline steel pipe[J]. PHYSICS EXAMINATION AND TESTING, 2019, 37(6): 1-5. |
[4] |
CUI Jin-xing1, HAN Shi-chao2, SUN Jian-liang1, PENG Yan1. Evolution characteristics of residual stresses in medium-thick plate during thinning process[J]. Iron and Steel, 2019, 54(5): 39-46. |
[5] |
XIONG Mao-xian, YANG Sha-sha, XIE Jun-feng, JI Bing-yin, MA Lei, SHI Jiao-qi. Discussion about correlation between blind-hole technology and the ring method in testing residual-stress of oil casing[J]. PHYSICS EXAMINATION AND TESTING, 2019, 37(3): 33-35. |
[6] |
SUN Jian-liang1,2, LI Kai1, DU Xing-ming1, PENG Yan1,2. Straightening process of longitude profiled plate based on matching straightening roller system[J]. Iron and Steel, 2019, 54(3): 47-55,62. |
|
|
|
|