|
|
Hazard and Prevention of Gas Gap in Hearth Wall of Blast Furnace |
ZOU Zhong-ping1,GUO Xian-zhen2 |
1. Ironmaking Department, Cisdi Engineering Co., Ltd., Chongqing 401122, China 2. Anyang Iron and Steel Co., Ltd., Anyang 455004, Henan, China |
|
|
Abstract Gas gap was the biggest threat to BF hearth long campaign life. Through academic calculations and field investigations, the influencing factors to cause gas gap in hearth area was analyzed. As the results, the effective measures involving design, construction and operation were proposed to avoid gas gap for long campaign life of BF hearth, and the solutions were provided to achieve non-gas gap operation and long hearth life. Jacket cooling, using hot water during furnace drying process and leak prevention were found to be the most effective measures of gas gap prevention.
|
Received: 30 September 2011
Published: 27 June 2012
|
|
|
|
|
[1] |
YANG Li-bin, ZENG Jia-qing, DENG Yong, XU Xiao-wei, WU Li-ping. Highly efficiency and long-life combined blowing technology of big converter[J]. Iron and Steel, 2020, 55(4): 45-52. |
[2] |
ZHENG Zhong, WANG Yong-zhou, LU Yi, GAO Xiao-qiang. Intelligent optimization model and system of plate and slab design of medium steel plate[J]. Iron and Steel, 2020, 55(4): 53-59. |
[3] |
WEN Xu, JIANG Hua, CAO Jin, WANG Wei, XU Run-sheng, YU Zhong-da. Measurement of thermal conductivity for iron skull of blastfurnace hearth and modification of heat transfer model[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(4): 347-353. |
[4] |
MA Li-dong,,HUANG Qing-xue,,CHEN Shuo,MA Hao-xi. Optimization of varying curvature profile of two-roll bar straightener[J]. Iron and Steel, 2018, 53(9): 45-52. |
[5] |
CAO Zhi-gang,FANG Yi-yuan,DU Zhong-ze,WANG Shuang-xi. Analysis of the design and manufacturing of the arc section’s mold of the oil storage tanks[J]. , 2018, 36(5): 48-51. |
[6] |
ZHENG Feng-xin,YANG Yi-nong,QIAN Liang,JIA Wen-jun,ZHANG Long. Study on second cooling design criteria aimed at high efficiency billet casting for full steel grades[J]. , 2018, 43(2): 1-6. |
|
|
|
|