|
|
Roller Curvature and Straightening Precision on Two-Roller Bar Straightener |
LIU Zhi-liang1,LIU Feng1,WANG Ying-jie2 |
1. College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China 2. Technique Center, Baoshan Iron and Steel Co., Ltd., Shanghai 210900, China |
|
|
Abstract In order to improve the straightening quality, the curve shape and straightening precision of double curve shape and three curvature shape was calculated by Matlab and roll shape was drawn according to the theory of elastic and elastic-plastic of bar. Considering the deformation of elastic plastic bar, the elastic plastic model of the specific two-roller straightener was built by means of finite element analysis software MARC. The working process of the two-roller straightening was simulated and the changing parameters were analyzed during the process of straightening. Through contrasting the straightening results, it was concluded that the straightening precision of curvature shape is better than that of double curvature shape.
|
Received: 16 September 2011
Published: 30 July 2012
|
|
|
|
[1] |
崔甫. 矫直原理与矫直机械[M].北京:冶金工业出版社,2002.233-309
|
[1] |
崔甫. 矫直原理与矫直机械[M].北京:冶金工业出版社,2002.233-309
|
[2] |
熬列伟,熊西. 二辊矫直辊面接触应力的计算[J].重型机械,2000.1,No1,34-3
|
[2] |
熬列伟,熊西. 二辊矫直辊面接触应力的计算[J].重型机械,2000.1,No1,34-3
|
[3] |
吕慕禹. ZQJ-40双凹辊式矫正机的试验与分析[J].山西机械,2001.6. 总第111期,No2,41-44
|
[3] |
吕慕禹. ZQJ-40双凹辊式矫正机的试验与分析[J].山西机械,2001.6. 总第111期,No2,41-44
|
[4] |
Min.nullJ.H.Analytical model for prediction of deformed shape in three-roll rolling process[J]..Journal of Materials Processing Technology, v 140, n 1-3 SPEC., Sep,2003,22:-
|
[4] |
Min.nullJ.H.Analytical model for prediction of deformed shape in three-roll rolling process[J]..Journal of Materials Processing Technology, v 140, n 1-3 SPEC., Sep,2003,22:-
|
[5] |
胡高举,郑才刚.斜辊矫直机辊型曲线的一种新算法[J].重型机械,2002,(6):22-24
|
[5] |
胡高举,郑才刚.斜辊矫直机辊型曲线的一种新算法[J].重型机械,2002,(6):22-24
|
[6] |
杜晓钟,孙斌煜.共轭旋转曲面法求解线棒材矫直辊型曲线[J].太原重型机械学院学报,2004,(04):25-26
|
[6] |
杜晓钟,孙斌煜.共轭旋转曲面法求解线棒材矫直辊型曲线[J].太原重型机械学院学报,2004,(04):25-26
|
[7] |
薛军安,胡贤磊等.辊式矫直过程弹塑性弯曲数学模型[J][J].钢铁研究学报,2008,(11):33-36
|
[7] |
薛军安,胡贤磊等.辊式矫直过程弹塑性弯曲数学模型[J][J].钢铁研究学报,2008,(11):33-36
|
[1] |
MA Li-dong,,HUANG Qing-xue,,CHEN Shuo,MA Hao-xi. Optimization of varying curvature profile of two-roll bar straightener[J]. Iron and Steel, 2018, 53(9): 45-52. |
[2] |
LIU Xiao-bin,AN Jie,LIU Gui-jiang,WANG Zhe, LI Tao. Analysis of internal inclusion in automobile gear steel bar[J]. , 2018, 36(6): 46-49. |
[3] |
DU Feng-shan,FENG Yan-feng,LIU Wen-wen,SUN Jing-na,WANG Hai-jun. Measuring technique for roll profile electromagnetic control in precision plate rolling[J]. Iron and Steel, 2017, 52(11): 75-80. |
[4] |
YU Wei,XIONG Jia-ze,LEI Li-qi,WANG Zhu-sheng. Core rod deformation principle of rolled coaxial composite bar[J]. Chinese Journal of Iron and Steel, 2016, 28(8): 33-38. |
[5] |
LIU Gui-jiang,BAO Wen-quan,HAN Feng-jun,AN Jie,WANG Zhe. Analysis on the surface defects of hot rolled bar[J]. Chinese Journal of Iron and Steel, 2016, 41(4): 64-68. |
[6] |
ZHANG Long,WANG Dong-cheng,,MA Xiao-bao,WANG Zhi-jie,ZHANG Shuai. Improvement measures of roll’s curve grinding precision for cold strip mill[J]. Iron and Steel, 2016, 51(12): 47-52. |
|
|
|
|