|
|
Influence Factors of Gas Distribution in Blast Furnace Hearth |
CHEN Chuan,CHENG Shu-sen |
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract Blast furnace enlargement is the trend of ironmaking development. As the diameter of blast furnace hearth increasing, the inactive region in the centre of blast furnace hearth becomes larger. It is a focus of attention how to guide the gas into the centre for BF operators. Three-dimensional model of blast furnace hearth was established. The gas velocity was calculated by CFX numerical simulation software. The influence of hearth diameter, coke diameter, stock column voidage and kinetic energy of tuyeres on the gas flow distribution in blast furnace hearth was investigated using this model. The results show that when the coke diameter and voidage distribute uniformly, the gas velocity in the periphery is still higher than the center. As the diameter of blast furnace hearth increasing, the center will become much inactive. The coke diameter and stock column voidage play an important part on improving the permeability of blast furnace hearth. The kinetic energy of tuyeres is related with the coke diameter and stock column in blast furnace hearth. In order to guarantee the stability of blast furnace, the blast parameters must be set reasonable. Blowing through the centre of blast furnace hearth can not be achieved by increasing the kinetic energy of tuyeres.
|
Received: 23 April 2012
Published: 14 January 2013
|
|
|
|
[1] |
程树森,杨天钧,薛庆国等.长寿高炉设计指标及设计方案评价系统初探[J].钢铁,2000,35 (5) :10.
|
[1] |
程树森,杨天钧,薛庆国等.长寿高炉设计指标及设计方案评价系统初探[J].钢铁,2000,35 (5) :10.
|
[2] |
程树森,杨天钧,左海滨等.长寿高炉炉缸和炉底温度场数学模型及数值模拟[J].钢铁研究学报,2004,16 (1) : 6.
|
[2] |
程树森,杨天钧,左海滨等.长寿高炉炉缸和炉底温度场数学模型及数值模拟[J].钢铁研究学报,2004,16 (1) : 6.
|
[3] |
杨志荣,程树森,赵宏博.太钢高炉炉底炉缸长寿探讨[J].炼铁,2005,24(6): 16.
|
[3] |
杨志荣,程树森,赵宏博.太钢高炉炉底炉缸长寿探讨[J].炼铁,2005,24(6): 16.
|
[4] |
Cheng S S, Yang T J, Xue Q G, et al. Numerical simulation for the lower shaft and hearth bottom of blast furnace. J Univ SciTechnol Beijing, 2003, 10 (3): 16.
|
[4] |
Cheng S S, Yang T J, Xue Q G, et al. Numerical simulation for the lower shaft and hearth bottom of blast furnace. J Univ SciTechnol Beijing, 2003, 10 (3): 16.
|
[5] |
赵宏博,程树森,赵民革.“传热法”炉缸和“隔热法”陶瓷杯复合炉缸炉底分析[J].北京科技大学学报,2007,29(6): 607.
|
[5] |
赵宏博,程树森,赵民革.“传热法”炉缸和“隔热法”陶瓷杯复合炉缸炉底分析[J].北京科技大学学报,2007,29(6): 607.
|
[6] |
赵宏博,程树森,霍守峰.高炉冷却壁及炉缸炉底工作状态在线监测[J].炼铁,2008,27(5): 4.
|
[6] |
赵宏博,程树森,霍守峰.高炉冷却壁及炉缸炉底工作状态在线监测[J].炼铁,2008,27(5): 4.
|
[7] |
赵宏博,程树森,霍守锋.高炉炉缸炉底温度场及异常侵蚀在线监测诊断系统[J].钢铁,2010,45(5): 11.
|
[7] |
赵宏博,程树森,霍守锋.高炉炉缸炉底温度场及异常侵蚀在线监测诊断系统[J].钢铁,2010,45(5): 11.
|
[8] |
周有德.高炉炉缸形成“蒜头状”侵蚀的分析和对策[J].钢铁,1998,33(2):4.
|
[8] |
周有德.高炉炉缸形成“蒜头状”侵蚀的分析和对策[J].钢铁,1998,33(2):4.
|
[9] |
徐万仁,张永忠,吴铿.高炉炉缸活跃性状态的表征及改善途径[J].炼铁,2010,29(3): 23-25.
|
[9] |
徐万仁,张永忠,吴铿.高炉炉缸活跃性状态的表征及改善途径[J].炼铁,2010,29(3): 23-25.
|
[10] |
徐万仁,朱仁良,张龙来,张永忠.宝钢2号高炉炉缸侧壁侵蚀原因及控制实践[J].钢铁,2007,42(1): 8-11.
|
[10] |
徐万仁,朱仁良,张龙来,张永忠.宝钢2号高炉炉缸侧壁侵蚀原因及控制实践[J].钢铁,2007,42(1): 8-11.
|
[11] |
赵铁良.迁钢1号高炉炉缸水温差异常的处理[J].炼铁,2009,28(1): 12-15.
|
[11] |
赵铁良.迁钢1号高炉炉缸水温差异常的处理[J].炼铁,2009,28(1): 12-15.
|
[12] |
张贺顺,刘利锋,马洪斌.首钢2号高炉强化冶炼炉缸水温差的控制[J].炼铁,2007,26(1): 23-24.
|
[13] |
张先棹.冶金传输原理[M].北京:冶金工业出版社,1998.
|
[12] |
张贺顺,刘利锋,马洪斌.首钢2号高炉强化冶炼炉缸水温差的控制[J].炼铁,2007,26(1): 23-24.
|
[14] |
项钟庸.用高炉炉腹煤气量指数来衡量高炉强化程度[J].炼铁,2007,26(2): 3.
|
[13] |
张先棹.冶金传输原理[M].北京:冶金工业出版社,1998.
|
[15] |
徐万仁,姜伟忠,张龙来等.高炉风口取样技术及其在宝钢的应用[J].炼铁,2004,23(1): 13.
|
[14] |
项钟庸.用高炉炉腹煤气量指数来衡量高炉强化程度[J].炼铁,2007,26(2): 3.
|
[15] |
徐万仁,姜伟忠,张龙来等.高炉风口取样技术及其在宝钢的应用[J].炼铁,2004,23(1): 13.
|
[16] |
竺维春,张雪松.风口焦炭取样研究对高炉操作的指导v.钢铁研究,2009,37(2): 14.
|
[16] |
竺维春,张雪松.风口焦炭取样研究对高炉操作的指导v.钢铁研究,2009,37(2): 14.
|
[17] |
王筱留.钢铁冶金学(炼铁部分)[M].北京:冶金工业出版社,2008.
|
[17] |
王筱留.钢铁冶金学(炼铁部分)[M].北京:冶金工业出版社,2008.
|
[18] |
张思斌,王涛,李颖.首钢外购焦炭质量恶化后的高炉生产实践[J].炼铁,2004,23(1):18~19.
|
[18] |
张思斌,王涛,李颖.首钢外购焦炭质量恶化后的高炉生产实践[J].炼铁,2004,23(1):18~19.
|
[19] |
Iwanaga Y. Coke properties sampled at tuyere and control of deadman zone. Ironmaking and steelmaking, 1991, 18(2):102.
|
[19] |
Iwanaga Y. Coke properties sampled at tuyere and control of deadman zone. Ironmaking and steelmaking, 1991, 18(2):102.
|
[1] |
WANG Kun1,LIU Xiao-jie1,LIU Er-hao2,LI Hong-yang1,LIU Song1,LV Qing1. Core temperature prediction model based on AdaBoost algorithm[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 363-369. |
[2] |
WEN Xu1,ZOU Zhong-ping2,JIANG Hua3,WANG Wei4,ZHENG Shao-bo1,YU Zhong-da1. Composition analysis and thermal conductivity measurement of iron skull in blast furnace hearth[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(9): 779-786. |
[3] |
WEN Xu, JIANG Hua, CAO Jin, WANG Wei, XU Run-sheng, YU Zhong-da. Measurement of thermal conductivity for iron skull of blastfurnace hearth and modification of heat transfer model[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(4): 347-353. |
[4] |
SONG Yang, DI Zhan-xia, LIU Ying, LONG Hong-ming, WANG Ping. Deadman status and its influence on hot metal flow in blast furnace hearth[J]. Iron and Steel, 2019, 54(3): 23-28,34. |
[5] |
LIU Xin-liang, HONEYANDS Tom, O′DEA Damien, MITRA Subhasish, CHEN Jeff, QIU Guang-jun. Interaction between sinter and lump during softening and melting process[J]. Iron and Steel, 2019, 54(12): 19-26. |
[6] |
WEN Xu1,ZOU Zhong-ping2,JIANG Hua3,WANG Wei4,ZHENG Shao-bo1,YU Zhong-da1. Carburization mechanism of molten ironslag passing through coke bed[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(10): 867-874. |
|
|
|
|