SiO2-TiO2-CaO-MgO-FeO-MnO渣系与脱钛过程铁水中Ti-Si平衡热力学模型

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (0 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to decrease titanium content in hot metal, a method of removing titanium in hot metal using sinter or pellet has been invented. An activity model of titanium in SiO2-TiO2-CaO-MgO-FeO-MnO slag system was built using software Matlab basing on the coexistence theory. The calculation result shows that the activity of TiO2 will decrease with the increase of MgO, FeO and MnO mole fraction and the increase of basicity. At the same time, it also grows up when the TiO2 mole fraction increases. Final titanium content in titanium removal process is proportional to the silicon content in hot metal. The proportional coefficient can be affected by temperature, metal content and the activities of SiO2 and TiO2 in slag. The calculated results meet with the experimental and industrial data.

Received: 25 September 2012 Published: 18 June 2013

PACS:

TF533.21

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Zhuang-Zhuang
	WU Wei
	GUO Xian-Li
	MENG Hua-Dong
	DIAO Jun-Pu

Cite this article:

LIU Zhuang-Zhuang,WU Wei,GUO Xian-Li等. SiO2-TiO2-CaO-MgO-FeO-MnO Slag System and Thermodynamic Model of Ti-Si Equilibrium in Titanium Removing Process[J]. Iron and Steel, 2013, 48(6): 34-39.

URL:

http://www.chinamet.cn/Jweb_gt/EN/ OR http://www.chinamet.cn/Jweb_gt/EN/Y2013/V48/I6/34

[1]	Akesson J, Lund T. SKF Rolling Bearing Steels-Properties and Processes[J]. Ball Bearing Journal,1983,217(10):32.
[2]	傅杰,王平,徐君浩等.轴承钢中微量元素氧-氮-钛-钙的作用与控制[J].特殊钢,1998,19(6):31.
[3]	赵中福,余新河,洪军等.帘线钢中非金属夹杂物的控制技术研究[J].钢铁,2009,44(03):40.
[1]	Akesson J, Lund T. SKF Rolling Bearing Steels-Properties and Processes[J]. Ball Bearing Journal,1983,217(10):32.
[4]	王郢,李宏,陈志钦等.60Si2Mn弹簧钢中TiN析出的热力学讨论[J].钢铁研究学报,2008,20(07):26.
[2]	傅杰,王平,徐君浩等.轴承钢中微量元素氧-氮-钛-钙的作用与控制[J].特殊钢,1998,19(6):31.
[3]	赵中福,余新河,洪军等.帘线钢中非金属夹杂物的控制技术研究[J].钢铁,2009,44(03):40.
[5]	赵锡珍.微量Ti对冷轧无取向硅钢片磁性的影响[J].钢铁研究,1992,69(06):26.
[4]	王郢,李宏,陈志钦等.60Si2Mn弹簧钢中TiN析出的热力学讨论[J].钢铁研究学报,2008,20(07):26.
[6]	曾新光.轴承钢TiN夹杂物析出的控制[J].北京科技大学学报,2009,31(S1):145.
[5]	赵锡珍.微量Ti对冷轧无取向硅钢片磁性的影响[J].钢铁研究,1992,69(06):26.
[7]	陈家祥.炼钢常用图表数据手册[M].北京:冶金工业出版社,1984.
[6]	曾新光.轴承钢TiN夹杂物析出的控制[J].北京科技大学学报,2009,31(S1):145.
[8]	吴巍,倪冰,刘壮壮.铁水脱钛热力学计算与实验分析[J].北京科技大学学报,2011,33(S1):25.
[9]	徐迎铁,陈兆平,夏幸明.铁水脱钛理论分析与实验研究[J].北京科技大学学报,2011,33(S1):29.
[7]	陈家祥.炼钢常用图表数据手册[M].北京:冶金工业出版社,1984.
[8]	吴巍,倪冰,刘壮壮.铁水脱钛热力学计算与实验分析[J].北京科技大学学报,2011,33(S1):25.
[10]	李闯,郭汉杰.铁水预处理中钛硅锰同时脱除规律及工艺[J].北京科技大学学报,2009,31(S1):88.
[9]	徐迎铁,陈兆平,夏幸明.铁水脱钛理论分析与实验研究[J].北京科技大学学报,2011,33(S1):29.
[10]	李闯,郭汉杰.铁水预处理中钛硅锰同时脱除规律及工艺[J].北京科技大学学报,2009,31(S1):88.
[11]	Chuiko N M. Determination of Activities for Slag Components in Consideration of Ions and Undecomposed Compounds. Izv.AK.Nauk. SSSR.Otdelenie Tekn., 1958,(11):7.
[11]	Chuiko N M. Determination of Activities for Slag Components in Consideration of Ions and Undecomposed Compounds. Izv.AK.Nauk. SSSR.Otdelenie Tekn., 1958,(11):7.
[12]	张鉴.关于炉渣结构的共存理论[J].北京钢铁学院学报,1984,(01):21.
[12]	张鉴.关于炉渣结构的共存理论[J].北京钢铁学院学报,1984,(01):21.
[13]	张鉴.冶金熔体和溶液的计算热力学[M].北京:冶金工业出版社,2007.
[13]	张鉴.冶金熔体和溶液的计算热力学[M].北京:冶金工业出版社,2007.
[14]	王俭,彭育强,译.渣图集[M].北京:冶金工业出版社,1989.
[14]	王俭,彭育强,译.渣图集[M].北京:冶金工业出版社,1989.
[15]	董希琳.高炉型钛渣中二氧化钛的活度[D].北京:中国科学院化工冶金研究所,1986.
[15]	董希琳.高炉型钛渣中二氧化钛的活度[D].北京:中国科学院化工冶金研究所,1986.
[16]	刘焕明,杜红,杨祖磐.高炉型熔渣中TiO2的活度[J].金属学报,1992,28(2):45.
[16]	刘焕明,杜红,杨祖磐.高炉型熔渣中TiO2的活度[J].金属学报,1992,28(2):45.
[17]	戚大光,李道昭,张桂欣,樊钟增钒钛磁铁矿高炉冶炼的热力学讨论[J].钢铁钒钛,1984,(02):79.
[17]	戚大光,李道昭,张桂欣,樊钟增钒钛磁铁矿高炉冶炼的热力学讨论[J].钢铁钒钛,1984,(02):79.
[18]	魏寿昆.从炉渣离子理论计算的硫分配比看攀钢钒钛铁矿中TiO2的属性[J].钢铁钒钛,1988,(04):1.
[18]	魏寿昆.从炉渣离子理论计算的硫分配比看攀钢钒钛铁矿中TiO2的属性[J].钢铁钒钛,1988,(04):1.
[19]	黄希祜.钢铁冶金原理（第三版）[M].北京:冶金工业出版社,2004.
[19]	黄希祜.钢铁冶金原理（第三版）[M].北京:冶金工业出版社,2004.
[20]	王新华.钢铁冶金（炼钢学）[M].北京:高等教育出版社,2007.
[20]	王新华.钢铁冶金（炼钢学）[M].北京:高等教育出版社,2007.