|
|
Application of Thickness Measuring Technique by Laser on Converter Lining and Quantitative Research |
PAN Yi-fang1,WU Yan2,HOU Kui1,WANG Bao-ming1,LI Shu-qing1,YUAN Zhang-fu2 |
1. Technology Centre, Tianjin Iron and Steel Group Co., Ltd., Tianjin 300301, China 2. Beijing Key Laboratory for Solid Waste Utilization and Management, Peking University, Beijing 100871, China |
|
|
Abstract Thickness measuring technology by laser was applied to practical production, which can realize quantification of erosion parts and real-time control of converter lining. Therefore, vulnerable parts of the furnace would be found and repaired timely to maintain converter lining. According to the determination, the weakest location of the lining was the load part of the facet of the converter in the early campaign life, while was the section of the trunnion in the middle campaign life, and erosion of lining was severe in the later stage of campaign. The lining thickness range can be divided into three parts, when campaign reached mid-late period, the thinnest lining was still above the stable range, and furnace life was more than economic life (20-23 thousand heats).
|
Received: 08 October 2012
Published: 19 August 2013
|
|
|
|
|
[1] |
卿家胜,杨森祥,黎建全.激光测厚系统对转炉炉衬维护中生产实践[J][J].四川冶金,2011,:-
|
[1] |
卿家胜,杨森祥,黎建全.激光测厚系统对转炉炉衬维护中生产实践[J][J].四川冶金,2011,:-
|
[2] |
王文科,王鹏,张越,等.激光测厚技术在260t转炉炉体维护中的应用[J]. 鞍钢技术,2010 (4): 54-57
|
[2] |
王文科,王鹏,张越,等.激光测厚技术在260t转炉炉体维护中的应用[J]. 鞍钢技术,2010 (4): 54-57
|
[3] |
Zhou Z D,Liu Q,Lin H,et al.Design and research of measurement system of furnace lining of converter with laser [R]. Xiamen,China: Proceedings of the 2002 International Conference on Control and Automation,2002 (6): 346-349
|
[3] |
Zhou Z D,Liu Q,Lin H,et al.Design and research of measurement system of furnace lining of converter with laser [R]. Xiamen,China: Proceedings of the 2002 International Conference on Control and Automation,2002 (6): 346-349
|
[4] |
王建波.激光测距仪原理及应用 [J]. 有色设备,2002 (6):15-16
|
[4] |
王建波.激光测距仪原理及应用 [J]. 有色设备,2002 (6):15-16
|
[5] |
Mills K C,Su Yuchu,Fox A B,et al.A review of slag splashing[J].ISIJ International,2005,45(5):619-633
|
[5] |
Mills K C,Su Yuchu,Fox A B,et al.A review of slag splashing[J].ISIJ International,2005,45(5):619-633
|
[6] |
Wang W J,Yuan Z F,Matsuura H,Zhao H X,Tsukihashi F.Three-dimensional compressible flow simulation of top-blown multiple jets in converter[J].ISIJ International,2010,50(4):491-500
|
[6] |
Wang W J,Yuan Z F,Matsuura H,Zhao H X,Tsukihashi F.Three-dimensional compressible flow simulation of top-blown multiple jets in converter[J].ISIJ International,2010,50(4):491-500
|
[7] |
Sheremet V A,Kekukh A V,Troshii S V,et al.Experience in the use and comprehensive maintenance of converter refractory linings [J]. Refractories and Industrial Ceramics,2006(47): 75-77
|
[7] |
Sheremet V A,Kekukh A V,Troshii S V,et al.Experience in the use and comprehensive maintenance of converter refractory linings [J]. Refractories and Industrial Ceramics,2006(47): 75-77
|
[8] |
Guo H M,Yang J.Research of BOF protection technology by slag splashing [J]. Materials Science Forum,2009 (1): 45-52
|
[8] |
Guo H M,Yang J.Research of BOF protection technology by slag splashing [J]. Materials Science Forum,2009 (1): 45-52
|
[9] |
Kumar D S,Prasad G.,Vishwanath S C,et al. Converter life enhancement through optimization of operating practices [J]. Ironmaking & Steelmaking,2007 (34): 521-528
|
[9] |
Kumar D S,Prasad G.,Vishwanath S C,et al. Converter life enhancement through optimization of operating practices [J]. Ironmaking & Steelmaking,2007 (34): 521-528
|
|
|
|