|
|
Effect of Strip Edge Offset on Original Shape Signal of Cold Rolling Strip |
YANG Li-po1,YU Bing-qiang1,LI Rong-min1,2,DU Chang-zheng2 |
1. National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, Hebei, China 2. Hebei Iron and Steel Group Hengshui Strip Rolling Co., Ltd., Hengshui 051000, Hebei, China |
|
|
Abstract In the shape detection process of the cold rolling strip, the strip edges on both sides often couldnt completely just cover a complete shape detection channel, so the edge shape error compensation model was established for this phenomenon. Using the model, channel coverage of the edge portion can be calculated according to the lateral shift amount of the strip automatically. Combined with two methods of the proportional compensation and the slope compensation, the shape signal error can be compensated based on its reasonable edge portion of the cold rolling strip. Physical testing and industrial datum show the method is reliable and effective.
|
Received: 16 January 2013
Published: 20 January 2014
|
|
|
|
[1] |
YANG Li-po,ZHANG Zhe,WANG Dong-cheng,LI Rong-min,,YU Hua-xin,ZHANG Yong-shun. Mechanism-intelligent coordination shape control model of cold strip[J]. Iron and Steel, 2017, 52(7): 52-57. |
[2] |
WANG Dong-cheng,,ZHAO Zhang-xian,LIU Hong-min,. High-efficiency software and its application for shape analysis and presetting of cold rolling strip[J]. Iron and Steel, 2015, 50(7): 54-60. |
[3] |
ZHAO Zhang-xian, WANG Dong-cheng,, WANG Peng-fei, LIU Hong-min,. Research and application of position error compensation model for shape meter[J]. Iron and Steel, 2015, 50(3): 49-53. |
[4] |
DING Shun-feng, YANG Li-po, YU Bing-qiang. Intelligent Model for Evaluating Cold Rolled Strip Shape Based on Fuzzy Evaluation Rule[J]. Iron and Steel, 2014, 49(9): 61-63. |
[5] |
YU Bing-qiang,YANG Li-po,GAO Peng. Comparison of Shape Measurement Methods of Cold Rolling Strip[J]. Chinese Journal of Iron and Steel, 2014, 26(5): 36-41. |
[6] |
WANG Ai-min,CHEN Hao-wei,BAI Guang-hou,XU Rong-chang . Determination and Analysis of Annealing Process of Cored Welding Ribbon Steel[J]. Chinese Journal of Iron and Steel, 2014, 32(2): 18-21. |
|
|
|
|