CSP线生产薄规格超高强带钢的轧制工艺与组织性能

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (0 KB) HTML (0 KB)
Export: BibTeX | EndNote (RIS)

Abstract The process and technology characteristics of CSP line were introduced. Through optimizing continuous casting and slab quality controlling, using 1180 ℃ tapping temperature and 850-920 ℃ finishing rolling temperature, the mechanical properties of thin gauge ultra-high strength strip were analyzed based on different cooling modes and coiling temperatures. The production results show that the head continuous cooling mode is helpful to grain refinement, higher coiling temperature is beneficial to the sufficient dispersed precipitate fine TiC particles, 70% of the TiC particle size is below 20nm causing significant precipitation strengthening. The machnanical properties of thin gauge strength were affected both by fine grain strengthening caused by and cooling rate and thinner gauge and precipitation strengthening caused by coiling temperature. By optimizing cooling mode and coiling temperature, 500, 600 and 700MPa strength grade strips with 1.2-6.0mm thickness were developed successfully.

Received: 08 April 2013 Published: 20 January 2014

PACS:

TG156.5

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHEN Liang
	ZHANG Tiao
	ZHU Shuai
	KANG Yong-Lin

Cite this article:

CHEN Liang,ZHANG Tiao,ZHU Shuai等. Rolling Process and Microstructure and Properties of Thin Gauge Ultra-High Strength Strip Manufactured by CSP Line[J]. Iron and Steel, 2014, 49(1): 57-61.

URL:

http://www.chinamet.cn/Jweb_gt/EN/ OR http://www.chinamet.cn/Jweb_gt/EN/Y2014/V49/I1/57

[1]	康永林，傅杰，柳得橹，等。薄板坯连铸连轧钢的组织性能控制[M]. 北京，冶金工业出版社，2006.
[2]	黎先浩，康永林，陈林恒，等。CSP生产600MPa级低碳贝氏体钢的相变[J]. 北京科技大学学报，2009，31（6）：701-707.
[2]	黎先浩，康永林，陈林恒，等。CSP生产600MPa级低碳贝氏体钢的相变[J]. 北京科技大学学报，2009，31（6）：701-707.
[3]	康永林，赵征志，于浩，等。轧制工艺对CSP线热轧汽车用高强钢板组织特征的影响[J]. 北京科技大学学报，2007，29（1）：30-33.
[3]	康永林，赵征志，于浩，等。轧制工艺对CSP线热轧汽车用高强钢板组织特征的影响[J]. 北京科技大学学报，2007，29（1）：30-33.
[4]	霍向东，毛新平，吕盛夏，等。CSP生产Ti微合金化高强钢中纳米碳化物[J]. 北京科技大学学报，2011，33（8）：941-946.
[4]	霍向东，毛新平，吕盛夏，等。CSP生产Ti微合金化高强钢中纳米碳化物[J]. 北京科技大学学报，2011，33（8）：941-946.
[5]	康永林，周建，毛新平。CSP生产Ti微合金化高强耐候钢组织、应用性能与耐候性分析[J]. 河南冶金，2007，15（4）：7-11.
[5]	康永林，周建，毛新平。CSP生产Ti微合金化高强耐候钢组织、应用性能与耐候性分析[J]. 河南冶金，2007，15（4）：7-11.
[6]	Kang Y，Thunman M，Du S C，et a1．Aluminum deoxidation equilibrium of molten iron-aluminum alloy with wide aluminum composition range at 1873K [J]．ISIJ International，2009，49(10)：1483-1489．
[6]	Kang Y，Thunman M，Du S C，et a1．Aluminum deoxidation equilibrium of molten iron-aluminum alloy with wide aluminum composition range at 1873K [J]．ISIJ International，2009，49(10)：1483-1489．
[7]	Pak J J，Jo J O，Kim S I，et a1．Thermodynamics of titanium and oxygen dissolved in liquid iron equilibrated with titanium oxides[J]．ISIJ International，2007，47(1)：16-24．
[7]	Pak J J，Jo J O，Kim S I，et a1．Thermodynamics of titanium and oxygen dissolved in liquid iron equilibrated with titanium oxides[J]．ISIJ International，2007，47(1)：16-24．
[8]	霍向东，毛新平，杨青峰，等。CSP热轧工艺对Ti微合金化钢组织和性能的影响[J]. 钢铁钒钛，2010，31（2）：26-31.
[8]	霍向东，毛新平，杨青峰，等。CSP热轧工艺对Ti微合金化钢组织和性能的影响[J]. 钢铁钒钛，2010，31（2）：26-31.