|
|
Investigation on control technology of narrow hardenability band for gear steel |
LIU Kun1, LIU Liu2, HE Ping2, CUI Jing-yu1, LI Fei1, BAO Chun-lin1 |
1. Strip Technology Department, Shougang Research Institute of Technology, Beijing 100043, China 2. Metallurgical Process Department, Central Iron and Steel Research Institute, Beijing 100081, China |
|
|
Abstract In order to improve the control precision of narrow hardenability band for gear steel, the target values and their precision range of component control were determined, and the computer control model of alloy addition and the rule base of composition adjustment were established, and hardenability prediction models were developed on the basis of incremental neural network. These control technologies of narrow hardenability band for gear steel were applied for the gear steel of 20CrMnTiH, the results show the reasonable hardenability band was obtained, the ratios of hardenability band ≤4HRC of J9 and J15 reached 93.3% and 89.2%, respectively, ratios of hardenability band ≤6HRC reached 99.3% and 98.4%, respectively.
|
Received: 17 July 2014
Published: 18 March 2015
|
|
|
|
|
[1] |
T.Fujita, T. Ochi and T. Tarui.. Prediction of Hardness Distribution in Forged Steel by Neural Network Model [J].Nippon Steel Technical Report, 2007, 96(7):57-61
|
[1] |
T.Fujita, T. Ochi and T. Tarui.. Prediction of Hardness Distribution in Forged Steel by Neural Network Model [J].Nippon Steel Technical Report, 2007, 96(7):57-61
|
[2] |
A.L. Geller, A. V. Kharchenko, E. D. Kachura, etal.Effect of the Composition on the Hardenability and Properties of Complexly Alloyed Steel for Large-Size Parts[J].Metal Science and Heat Treatment, 1995, 37(5-6):187-191
|
[2] |
A.L. Geller, A. V. Kharchenko, E. D. Kachura, etal.Effect of the Composition on the Hardenability and Properties of Complexly Alloyed Steel for Large-Size Parts[J].Metal Science and Heat Treatment, 1995, 37(5-6):187-191
|
[3] |
T.Filetin, D. Majetic and I. Zmak. .Application of Neural Networks in Predicting the Steel Properties[C]// the 10th International Daaam Symposium. Vienna, Austria: Vienna University of Technology, 1999.
|
[3] |
T.Filetin, D. Majetic and I. Zmak. .Application of Neural Networks in Predicting the Steel Properties[C]// the 10th International Daaam Symposium. Vienna, Austria: Vienna University of Technology, 1999.
|
[4] |
L.A. Dobrzanski, W. Sitek. .Comparison of Hardenability Calculation Methods of the Heat-treatable Constructional Steels[J].Journal of Materials Processing Technology, 1997, 64(1):117-126
|
[4] |
L.A. Dobrzanski, W. Sitek. .Comparison of Hardenability Calculation Methods of the Heat-treatable Constructional Steels[J].Journal of Materials Processing Technology, 1997, 64(1):117-126
|
[5] |
L.A. Dobrzanski, W. Sitek. .Application of a Neural Network in Modelling of Hardenability of Constructional Steels[J].Journal of Materials Processing Technology, 1998, 78(1):59-66
|
[5] |
L.A. Dobrzanski, W. Sitek. .Application of a Neural Network in Modelling of Hardenability of Constructional Steels[J].Journal of Materials Processing Technology, 1998, 78(1):59-66
|
[6] |
L.A. Dobrzanski, W.Sitek. .the Modelling of Hardenability Using Neural Networks[J].Journal of Materials Processing Technology, 1999, 92-93(1):8-14
|
[6] |
L.A. Dobrzanski, W.Sitek. .the Modelling of Hardenability Using Neural Networks[J].Journal of Materials Processing Technology, 1999, 92-93(1):8-14
|
[7] |
K.Dehghani, A. Shafiei.. Predicting the Bake Hardenability of Steels Using Neural Network Modelling[J].Materials Letters, 2008, 62(1):173-178
|
[7] |
K.Dehghani, A. Shafiei.. Predicting the Bake Hardenability of Steels Using Neural Network Modelling[J].Materials Letters, 2008, 62(1):173-178
|
[8] |
M.V. Li, D.V. Niebuhr, L. L. Meekisho, et al.. A Computational Model for the Prediction of Steel Hardenability[J]. . . :[J].Metallurgical and Materials Transactions B, 1998, 29B(1):661-672
|
[8] |
M.V. Li, D.V. Niebuhr, L. L. Meekisho, et al.. A Computational Model for the Prediction of Steel Hardenability[J]. . . :[J].Metallurgical and Materials Transactions B, 1998, 29B(1):661-672
|
[9] |
丁容,刘浏.转炉炼钢过程人工智能静态控制模型[J].钢铁, 1997, 32(1):22-26
|
[9] |
丁容,刘浏.转炉炼钢过程人工智能静态控制模型[J].钢铁, 1997, 32(1):22-26
|
[1] |
LIU Jie. Artificial intelligence drives changes in metallurgical industry[J]. Iron and Steel, 2020, 55(6): 1-7. |
[2] |
CAO Yan-guang, LI Zhao-dong, DING Can-can, ZHANG Jin-wen, YONG Qi-long, GAO Jian-bing. Effect of niobium addition on hardenability of high-speed railway axle steel[J]. Iron and Steel, 2020, 55(6): 107-112. |
[3] |
LI Lan-xin1,WANG Min1,JUAN Rong-fei1,BAO Yan-ping1,YANG Jin2. Distribution characteristics of oxides and sulfide inclusions in key areas of gear steel forgings[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 370-376. |
[4] |
. [J]. , 2020, 45(3): 0-0. |
[5] |
WU Sheng-li, QUE Zhi-gang, AI Xian-bin. Research process on regulating reaction behaviors of calcium-containing compounds for reducing NOx emission in sintering process[J]. Iron and Steel, 2020, 55(3): 1-8. |
[6] |
CHEN Deng-fu, XU Pei, LONG Mu-jun, DUAN Hua-mei, YANG Jie, WU Shi-xin. Development and investigation of advanced process model for secondary cooling in continuous casting of molten steel[J]. Iron and Steel, 2020, 55(3): 40-49. |
|
|
|
|