|
|
Effects of charging patterns of bell-less top blast furnace with two parallel hoppers on burden distribution of stock surface |
XU Wen-xuan1,CHENG Shu-sen1,NIU Qun1,ZHAO Guo-lei1,CHEN Yan-bo2 |
(1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China 2. Ironmaking Department, Shougang Jingtang United Iron and Steel Co., Ltd., Tangshan 063200, Hebei, China) |
|
|
Abstract In order to investigate the influence of charging patterns on the burden distribution of the stock surface in blast furnace with two parallel hoppers, the full model of bell-less top system with two parallel hoppers in actual 5 500 m3 blast furnace was established, and the motions of burden materials in the cases of the ore (A)-ore (B)-coke charging pattern and the ore-coke charging pattern were calculated by Discrete Element Method, respectively. The effects of charging patterns on the burden distribution of the stock surface were comparative and analyzed. The results show that the burden distribution of the stock surface is different in two different charging patterns, because the burden falling trajectory is not coincident while the ore-A and ore-B are charged into the stock surface. In the radial direction of the stock surface, the influence of charging patterns on the ore volume distribution and the ore/coke ratio distribution of the stock surface is negligible. In the circumferential direction of the stock surface, the standard deviation of the ore volume distribution of the stock surface in the ore-ore-coke charging pattern and the ore-coke charging pattern is 0.133 and 0.147, respectively, and the standard deviation of the ore/coke ratio distribution of the stock surface in the ore-ore-coke charging pattern and the ore-coke charging pattern is 0.074 and 0.086, respectively. The ore volume distribution and the ore/coke ratio distribution of the stock surface is more uniform in the ore-ore-coke charging pattern.
|
Received: 27 March 2017
Published: 21 December 2017
|
|
|
|
[1] |
滕召杰,程树森,赵国磊.并罐式无钟炉顶布料料面中心研究[J].钢铁研究学报, 2014, 26(06):5-10
|
[1] |
滕召杰,程树森,赵国磊.并罐式无钟炉顶布料料面中心研究[J].钢铁研究学报, 2014, 26(06):5-10
|
[2] |
TENG Zhao-jie, CHENG Shu-sen, ZHAO Guo-lei.Research of the center of the burden surface for a bell-less top blast furnace with parallel hoppers[J].Journal of Iron and Steel Research, 2014, 26(06):5-20
|
[2] |
TENG Zhao-jie, CHENG Shu-sen, ZHAO Guo-lei.Research of the center of the burden surface for a bell-less top blast furnace with parallel hoppers[J].Journal of Iron and Steel Research, 2014, 26(06):5-20
|
[3] |
马富涛.高炉偏析布料料面的数值模拟[J].钢铁, 2013, 48(08):19-23
|
[3] |
马富涛.高炉偏析布料料面的数值模拟[J].钢铁, 2013, 48(08):19-23
|
[4] |
MA Fu-tao.Simulation on Charge Level for BF Segregation Feeding[J].Iron and Steel, 2013, 48(08):19-23
|
[4] |
MA Fu-tao.Simulation on Charge Level for BF Segregation Feeding[J].Iron and Steel, 2013, 48(08):19-23
|
[5] |
杜鹏宇,程树森,滕召杰.并罐式无钟炉顶布料蛇形偏料的研究[J].北京科技大学学报, 2011, 33(4):479-485
|
[5] |
杜鹏宇,程树森,滕召杰.并罐式无钟炉顶布料蛇形偏料的研究[J].北京科技大学学报, 2011, 33(4):479-485
|
[6] |
DU Peng-yu, CHENG Shu-sen, TENG Zhao-jie.Research of snakelike deviation in the burden distribution of a parallel-hopper bell-less top[J].Journal of University of Science and Technology Beijing, 2011, 33(4):479-485
|
[6] |
DU Peng-yu, CHENG Shu-sen, TENG Zhao-jie.Research of snakelike deviation in the burden distribution of a parallel-hopper bell-less top[J].Journal of University of Science and Technology Beijing, 2011, 33(4):479-485
|
[7] |
LIANG D, YU Y W, BAI C G, et al.Effect of burden material size on blast furnace stockline profile of bell-less blast furnace[J].Ironmaking & Steelmaking, 2009, 36(3):217-221
|
[7] |
LIANG D, YU Y W, BAI C G, et al.Effect of burden material size on blast furnace stockline profile of bell-less blast furnace[J].Ironmaking & Steelmaking, 2009, 36(3):217-221
|
[8] |
YU Y W, BAI C G, ZHANG Z R, et al.Theoretical calculation and validation of burden trajectory in bell-less top blast furnace[J].Ironmaking & Steelmaking, 2009, 36(7):505-508
|
[8] |
YU Y W, BAI C G, ZHANG Z R, et al.Theoretical calculation and validation of burden trajectory in bell-less top blast furnace[J].Ironmaking & Steelmaking, 2009, 36(7):505-508
|
[9] |
NAG S, KORANNE V M.Development of material trajectory simulation model for blast furnace compact bell-less top[J].Ironmaking & Steelmaking, 2013, 36(5):371-378
|
[9] |
NAG S, KORANNE V M.Development of material trajectory simulation model for blast furnace compact bell-less top[J].Ironmaking & Steelmaking, 2013, 36(5):371-378
|
[10] |
REN T Z, JIN X, BEN H Y, et al.Burden Distribution for Bell-Less Top With Two Parallel Hoppers[J].Journal of Iron and Steel Research, International, 2006, 13(2):14-17
|
[10] |
REN T Z, JIN X, BEN H Y, et al.Burden Distribution for Bell-Less Top With Two Parallel Hoppers[J].Journal of Iron and Steel Research, International, 2006, 13(2):14-17
|
[11] |
TENG Z J, Cheng S S, Du P Y, et al.Mathematical model of burden distribution for the bell-less top of a blast furnace[J].International Journal of Minerals, Metallurgy, and Materials, 2013, 20(7):620-626
|
[11] |
TENG Z J, Cheng S S, Du P Y, et al.Mathematical model of burden distribution for the bell-less top of a blast furnace[J].International Journal of Minerals, Metallurgy, and Materials, 2013, 20(7):620-626
|
[12] |
XU J, WU S L, KOU M Y, et al.Circumferential burden distribution behaviors at bell-less top blast furnace with parallel type hoppers[J].Applied Mathematical Modelling, 2011, 35(3):1439-1455
|
[12] |
XU J, WU S L, KOU M Y, et al.Circumferential burden distribution behaviors at bell-less top blast furnace with parallel type hoppers[J].Applied Mathematical Modelling, 2011, 35(3):1439-1455
|
[13] |
ZHAO G L, CHENG S S, XU W X, et al.Comprehensive Mathematical Model for Particle Flow and Circumferential Burden Distribution in Charging Process of Bell-less Top Blast Furnace with Parallel Hoppers[J].ISIJ International, 2015, 55(12):2566-2575
|
[13] |
ZHAO G L, CHENG S S, XU W X, et al.Comprehensive Mathematical Model for Particle Flow and Circumferential Burden Distribution in Charging Process of Bell-less Top Blast Furnace with Parallel Hoppers[J].ISIJ International, 2015, 55(12):2566-2575
|
[14] |
ZHAO H T, ZHU M H, DU P, et al.Uneven Distribution of Burden Materials at Blast Furnace Top in Bell-less Top with Parallel Bunkers[J].ISIJ International, 2012, 52(12):2177-2185
|
[14] |
ZHAO H T, ZHU M H, DU P, et al.Uneven Distribution of Burden Materials at Blast Furnace Top in Bell-less Top with Parallel Bunkers[J].ISIJ International, 2012, 52(12):2177-2185
|
[15] |
YU Y W, SAXéN H.Segregation behavior of particles in a top hopper of a blast furnace[J]., 2014, 262:233-241
|
[15] |
YU Y W, SAXéN H.Segregation behavior of particles in a top hopper of a blast furnace[J]., 2014, 262:233-241
|
[16] |
邱家用,张建良,孙辉,等.并罐式无钟炉顶装料行为的离散元模拟及实验研究[J].应用数学和力学, 2014, 35(06):598-609
|
[16] |
邱家用,张建良,孙辉,等.并罐式无钟炉顶装料行为的离散元模拟及实验研究[J].应用数学和力学, 2014, 35(06):598-609
|
[17] |
QIU Jia-yong, ZHANG Jian-liang, SUN Hui, et al.DEM simulation and experiment investigation of burden distribution in the parallel-hopper bell-less top blast furnace[J].Applied Mathematics and Mechanics, 2014, 35(06):598-609
|
[17] |
QIU Jia-yong, ZHANG Jian-liang, SUN Hui, et al.DEM simulation and experiment investigation of burden distribution in the parallel-hopper bell-less top blast furnace[J].Applied Mathematics and Mechanics, 2014, 35(06):598-609
|
[18] |
邱廷省,吴紧钢,邱小平,等.无料钟并罐装料过程的离散单元模拟[J].计算机与应用化学, 2015, 32(05):527-533
|
[18] |
邱廷省,吴紧钢,邱小平,等.无料钟并罐装料过程的离散单元模拟[J].计算机与应用化学, 2015, 32(05):527-533
|
[19] |
QIU Ting-sheng, WU Jin-gang, QIU Xiao-ping, et al.A discrete element method modeling for charging process in a bell-less top with two parallel hoppers[J].Computers and Applied Chemistry, 2015, 32(05):527-533
|
[19] |
QIU Ting-sheng, WU Jin-gang, QIU Xiao-ping, et al.A discrete element method modeling for charging process in a bell-less top with two parallel hoppers[J].Computers and Applied Chemistry, 2015, 32(05):527-533
|
[20] |
MIO H, KADOWAKI M, MATSUZAKI S, et al.Development of particle flow simulator in charging process of blast furnace by discrete element method [J]. Minerals Engineering, 2012, 33: 27-33.
|
[20] |
MIO H, KADOWAKI M, MATSUZAKI S, et al.Development of particle flow simulator in charging process of blast furnace by discrete element method [J]. Minerals Engineering, 2012, 33: 27-33.
|
[1] |
SUN Jun-jie, ZHANG Yong-jie, XU Ji. Segregation of sinter particles in sinter shaft cooler[J]. Iron and Steel, 2020, 55(3): 16-22. |
[2] |
MA Hong-you,ZHANG Jian-liang,WANG Zhen-yang,ZHANG Lei. Segregation of burden distribution phenomenon in bell less furnace top equipment[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(3): 220-226. |
[3] |
DU Bin-bin, WU Sheng-li, ZHOU Heng, KOU Ming-yin. Effect of scaffolding on solid flow in COREX shaft furnace by discrete element simulation method[J]. Iron and Steel, 2020, 55(1): 12-19. |
[4] |
SUN Jun-jie, DI Zhan-xia, LI Jia-xin, LU Kai-cheng. Influence of inclination and shape of chute on movement of burden flow[J]. Iron and Steel, 2019, 54(4): 19-23. |
[5] |
BANG Jia-wen,CHENG Shu-sen,GE Jun-liang,CHEN Pei-dun,XU Wen-xuan,HU Wei,XUE Yu-qing. Design optimization of insert in serial-hopper bell-less top system of Taisteel blast furnace[J]. Iron and Steel, 2019, 54(1): 19-27. |
[6] |
KOU Ming-yin,WU Sheng-li,ZHOU Heng,YU Ya-guang,GU Kai. Measurements and application of burden coefficients for DEM simulation in blast furnace[J]. Iron and Steel, 2018, 53(12): 30-36. |
|
|
|
|