|
|
Influence of FeO on compound oxides in Si-Mn deoxidized steel during heat treatment at 1 273 K |
YE Fei,LIU Cheng-song,NI Hong-wei,FANG Qing,SONG Xiao |
(The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, Hubei, China) |
|
|
Abstract In order to investigate the mechanism of interfacial reaction between Si-Mn deoxidized steel and oxides of MnO-SiO2-Al2O3-CaO-MgO-FeO, diffusion couples of the steel and oxides made by confocal scanning laser microscope were used to determine the reaction laws during heat treatment at 1 273 K for 10 h, in which the influence of FeO on the interfacial reaction was mainly studied. The results indicate that FeO would decompose into Fe and [O] in the interfacial reaction process of Si-Mn deoxidized steel and oxides of MnO-SiO2-Al2O3-CaO-MgO-FeO during heat-treatment. As a result,pure Fe particles form in the oxides near the interface between steel and oxides and the excessive [O] diffuses to steel matrix close to the interface, reacting with Si and Mn to generate tremendous amounts of MnO-SiO2-type particles.
|
Received: 11 September 2017
Published: 11 May 2018
|
|
|
|
[1] |
Myung-Duk SEO, Jung-Wook CHO, Kwang-Chun KIM, et al.Evolution of Non-Metallic Inclusions in Ultra Low Carbon Steel after Aluminum Deoxidization[J].Isij International, 2014, 54(3):475-481
|
[1] |
Myung-Duk SEO, Jung-Wook CHO, Kwang-Chun KIM, et al.Evolution of Non-Metallic Inclusions in Ultra Low Carbon Steel after Aluminum Deoxidization[J].Isij International, 2014, 54(3):475-481
|
[2] |
Ono H, Nakajima K, Ibuta T, et al.Equilibrium Relationship between the Oxide Compounds in MgO–Al2O3–Ti2O3 and Molten Iron at 1873 K[J].Isij International, 2010, 50(12):1955-1958
|
[2] |
Ono H, Nakajima K, Ibuta T, et al.Equilibrium Relationship between the Oxide Compounds in MgO–Al2O3–Ti2O3 and Molten Iron at 1873 K[J].Isij International, 2010, 50(12):1955-1958
|
[3] |
王新华, 陈斌, 姜敏, 等.渣-钢反应对高强度合金结构钢中生成较低熔点非金属夹杂物的影响[J].钢铁, 2008, 43(12):28-32
|
[3] |
王新华, 陈斌, 姜敏, 等.渣-钢反应对高强度合金结构钢中生成较低熔点非金属夹杂物的影响[J].钢铁, 2008, 43(12):28-32
|
[4] |
WANG Xin-hua, CHEN Bin, JIANG Min, et al.Effect of Slag-Metal Reaction on Formation of Non-metallic Inclusions of Lower Melting Temperature in High Strength Alloyed Structural Steel[J].Iron and Steel, 2008, 43(12):28-32
|
[4] |
WANG Xin-hua, CHEN Bin, JIANG Min, et al.Effect of Slag-Metal Reaction on Formation of Non-metallic Inclusions of Lower Melting Temperature in High Strength Alloyed Structural Steel[J].Iron and Steel, 2008, 43(12):28-32
|
[5] |
王立涛, 薛正良, 张乔英, 等.钢包炉吹氩与夹杂物去除[J].钢铁研究学报, 2005, 17(3):34-38
|
[5] |
王立涛, 薛正良, 张乔英, 等.钢包炉吹氩与夹杂物去除[J].钢铁研究学报, 2005, 17(3):34-38
|
[6] |
WANG Li-tao, XUE Zheng-liang, ZHANG Qiao-ying, et al.Argon Blowing and Inclusion Removal in Ladle Furnace[J].Journal of Iron and Steel Research, 2005, 17(3):34-38
|
[6] |
WANG Li-tao, XUE Zheng-liang, ZHANG Qiao-ying, et al.Argon Blowing and Inclusion Removal in Ladle Furnace[J].Journal of Iron and Steel Research, 2005, 17(3):34-38
|
[7] |
刘国梁, 苑品, 季晨曦, 等.板坯连铸中间包气幕挡墙夹杂物去除的研究[J].炼钢, 2012, 28(3):57-60
|
[7] |
刘国梁, 苑品, 季晨曦, 等.板坯连铸中间包气幕挡墙夹杂物去除的研究[J].炼钢, 2012, 28(3):57-60
|
[8] |
LIU Guo-liang, YUAN Pin, JI Chen-xi, et al.Study on the inclusion removal by gas curtain in slab continuous casting tundish[J].Steelmaking, 2012, 28(3):57-60
|
[8] |
LIU Guo-liang, YUAN Pin, JI Chen-xi, et al.Study on the inclusion removal by gas curtain in slab continuous casting tundish[J].Steelmaking, 2012, 28(3):57-60
|
[9] |
Moon K H, Shin H K, Kim B J, et al.Flow Control of Molten Steel by Electromagnetic Brake in the Continuous Casting Mold[J].Isij International, 1996, 36(Suppl):S201-S203
|
[9] |
Moon K H, Shin H K, Kim B J, et al.Flow Control of Molten Steel by Electromagnetic Brake in the Continuous Casting Mold[J].Isij International, 1996, 36(Suppl):S201-S203
|
[10] |
Park J S, Park J H.Effect of Slag Composition on the Concentration of Al2O3,in the Inclusions in Si-Mn-killed Steel[J].Metallurgical & Materials Transactions B, 2014, 45(3):953-960
|
[10] |
Park J S, Park J H.Effect of Slag Composition on the Concentration of Al2O3,in the Inclusions in Si-Mn-killed Steel[J].Metallurgical & Materials Transactions B, 2014, 45(3):953-960
|
[11] |
Wang K, Jiang M, Wang X, et al.Formation Mechanism of SiO2 -Type Inclusions in Si-Mn-Killed Steel Wires Containing Limited Aluminum Content[J].Metallurgical & Materials Transactions B, 2015, 46(5):2198-2207
|
[11] |
Wang K, Jiang M, Wang X, et al.Formation Mechanism of SiO2 -Type Inclusions in Si-Mn-Killed Steel Wires Containing Limited Aluminum Content[J].Metallurgical & Materials Transactions B, 2015, 46(5):2198-2207
|
[12] |
Kim K H, Kim S J, Shibata H, et al.Reaction between MnO-SiO2-FeO Oxide and Fe-Mn-Si solid alloy during heat treatment[J].Isij International, 2014, 54(10):2144-2153
|
[12] |
Kim K H, Kim S J, Shibata H, et al.Reaction between MnO-SiO2-FeO Oxide and Fe-Mn-Si solid alloy during heat treatment[J].Isij International, 2014, 54(10):2144-2153
|
[13] |
Kim K H, Shibata H, Kitamura S Y.Influence of Sulfur on the Reaction between MnO–SiO2–FeO Oxide and Fe–Mn–Si Solid Alloy by Heat Treatment[J].Isij International, 2014, 54(12):2678-2686
|
[13] |
Kim K H, Shibata H, Kitamura S Y.Influence of Sulfur on the Reaction between MnO–SiO2–FeO Oxide and Fe–Mn–Si Solid Alloy by Heat Treatment[J].Isij International, 2014, 54(12):2678-2686
|
[14] |
Taniguchi T, Satoh N, Saito Y, et al.Investigation of Compositional Change of Inclusions in Martensitic Stainless Steel during Heat Treatment by Newly Developed Analysis Method[J].Isij International, 2011, 51(12):1957-1966
|
[14] |
Taniguchi T, Satoh N, Saito Y, et al.Investigation of Compositional Change of Inclusions in Martensitic Stainless Steel during Heat Treatment by Newly Developed Analysis Method[J].Isij International, 2011, 51(12):1957-1966
|
[15] |
Kang Y B, Hae-Geon L.Inclusions Chemistry for MnSi Deoxidized Steels: Thermodynamic Predictions and Experimental Confirmations[J].Isij International, 2007, 44(6):1006-1015
|
[15] |
Kang Y B, Hae-Geon L.Inclusions Chemistry for MnSi Deoxidized Steels: Thermodynamic Predictions and Experimental Confirmations[J].Isij International, 2007, 44(6):1006-1015
|
[16] |
Tayeb M A, Assis A N, Sridhar S, et al.MgO Solubility in Steelmaking Slags[J].Metallurgical & Materials Transactions B, 2015, 46(3):1-3
|
[16] |
Tayeb M A, Assis A N, Sridhar S, et al.MgO Solubility in Steelmaking Slags[J].Metallurgical & Materials Transactions B, 2015, 46(3):1-3
|
[17] |
Liu C, Ni H, Yang S, et al.Interfacial reaction mechanism between multi-component oxides and solid alloys deoxidised by Mn and Si during heat treatment[J].Ironmaking & Steelmaking, 2017, :1-9
|
[17] |
Liu C, Ni H, Yang S, et al.Interfacial reaction mechanism between multi-component oxides and solid alloys deoxidised by Mn and Si during heat treatment[J].Ironmaking & Steelmaking, 2017, :1-9
|
[18] |
刘成松, 叶飞.热处理过程中界面固相反应控制锰硅类氧化物变性的机理研究[J].金属学报, 2017, 53(1):10-18
|
[18] |
刘成松, 叶飞.热处理过程中界面固相反应控制锰硅类氧化物变性的机理研究[J].金属学报, 2017, 53(1):10-18
|
[19] |
LIU Cheng-song, YE Fei.Mechanism on Modification of MnO-SiO2-Type Oxide by Interfacial Solid-State Reaction During Heat Treatment[J].Acta Metallurgica Sinica, 2017, 53(1):10-18
|
[19] |
LIU Cheng-song, YE Fei.Mechanism on Modification of MnO-SiO2-Type Oxide by Interfacial Solid-State Reaction During Heat Treatment[J].Acta Metallurgica Sinica, 2017, 53(1):10-18
|
[20] |
Ohta H, Suito H.Activities in MnO-SiO2-AI2O3,slags and deoxidation equilibria of Mn and Si[J].Metallurgical & Materials Transactions B, 1996, 27(2):263-270
|
[20] |
Ohta H, Suito H.Activities in MnO-SiO2-AI2O3,slags and deoxidation equilibria of Mn and Si[J].Metallurgical & Materials Transactions B, 1996, 27(2):263-270
|
[1] |
HOU Xin-mei, LIU Yun-song, WANG En-hui. Effect of ladle-lining refractory on non-metallic inclusions in steel[J]. Iron and Steel, 2020, 55(6): 15-24. |
[2] |
WANG Ji-hong, ZHANG Li-na, CHEN De-li, QI Yue, CAO Li-hong. Discussion about heat treatment process of X20Cr13 blade steel for gas turbine[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(3): 18-. |
[3] |
HAN Yi, XIAO Yao, ZHANG Ao-yin, ZHAO Yu-fei, LIU Feng, LI Hong-bin. Recessive defects in electromagnetic heating process of electrical resistance welding steel pipe[J]. Iron and Steel, 2020, 55(1): 108-118. |
[4] |
REN Ze,CHEN Xu,DONG Pei,LIAN Jingbao. Effect of heat treatment process on microstructure and #br# tensile properties of super 13Cr stainless steel[J]. Iron and Steel, 2019, 54(7): 68-76. |
[5] |
YU Enlin, XIAO Yao, LIU Feng, LI Dalong, HAN Yi, ZHAO Yuqian. Welding and heat treatment of high frequency longitudinal welded pipe[J]. Iron and Steel, 2019, 54(6): 1-10. |
[6] |
LI Xia,ZHU Shi-li,JIN Man-jie. Cracking analysis of 42CrMo high strength bolt after heat treatment[J]. PHYSICS EXAMINATION AND TESTING, 2019, 37(6): 51-54. |
|
|
|
|