|
|
Silicon mass percent control of SPHC steel in thin slab continuous casting |
SUN Bo,ZHANG Liang-ming,WU Yao-guang,XIE Yang-guo,LIU Qian-zhi,WAN Dong |
(No.1 Steel Making and Rolling General Plant, Ma’anshan Iron and Steel Co., Ltd., Ma’anshan 243000, Anhui, China) |
|
|
Abstract In order to solve the problem of silicon increase in the refinement process of low carbon and low silicon Al-killed steel, the production of SPHC steel in the CSP process of Ma’anshan Iron and Steel Company was combined in the current study,and the influence of the slag quantity in tapping,the hot steel and slag recovery,the content of Al in molten steel,the composition of refining slag and the time of refining treatment on the increase of silicon content in the molten steel was analyzed.Through controlling the slag quantity in tapping less than 3.0 kg/t,reducing the amount of hot steel and slag recovery appropriately and reducing the content of Al in steel,adjusting the composition of refining slag appropriately,improving the basicity of slag and reducing the time of LF refining process can reduce the silicon increase in molten steel during the refining process,which is beneficial to keep the Si content of molten steel in low level to meet the subsequent processing demand.
|
Received: 15 December 2017
Published: 11 May 2018
|
|
|
|
[1] |
刘先同,何金平.薄板坯连铸低碳低硅钢SPHC的成分控制[J].炼钢,2011,27(6):20.
|
[1] |
刘先同,何金平.薄板坯连铸低碳低硅钢SPHC的成分控制[J].炼钢,2011,27(6):20.
|
[2] |
殷瑞钰,王新华.适用于转炉—薄板坯连铸钢厂的合理炉外精炼工艺的探讨[J].钢铁,2005,40(10):1.
|
[2] |
殷瑞钰,王新华.适用于转炉—薄板坯连铸钢厂的合理炉外精炼工艺的探讨[J].钢铁,2005,40(10):1.
|
[3] |
陈家祥.炼钢常用图表数据手册[M].北京冶金工业出版社,1984:702.
|
[3] |
陈家祥.炼钢常用图表数据手册[M].北京冶金工业出版社,1984:702.
|
[4] |
曾加庆,张建平,范鼎东,等.马钢CSP流程对钢水硅含量的控制[J].钢铁,2005,40(10):29.
|
[4] |
曾加庆,张建平,范鼎东,等.马钢CSP流程对钢水硅含量的控制[J].钢铁,2005,40(10):29.
|
[5] |
解养国,吴耀光,胡玉畅,等.LF炉热态钢渣循环利用技术的应用[J].中国冶金,2008,18(7):32.
|
[5] |
解养国,吴耀光,胡玉畅,等.LF炉热态钢渣循环利用技术的应用[J].中国冶金,2008,18(7):32.
|
[6] |
Ohta H,Suito Hi.Activities in CaO-SiO2-Al2O3 slags and deoxidation equilibria of Si and Al[J].Metallurgical and Materials Transactions B,1996,27(6):943.
|
[6] |
Ohta H,Suito Hi.Activities in CaO-SiO2-Al2O3 slags and deoxidation equilibria of Si and Al[J].Metallurgical and Materials Transactions B,1996,27(6):943.
|
[7] |
孙波,张良明,吴耀光,等.马钢SPHC钢钙处理的热力学分析[J].中国冶金,2017,27(1):50.
|
[7] |
孙波,张良明,吴耀光,等.马钢SPHC钢钙处理的热力学分析[J].中国冶金,2017,27(1):50.
|
[8] |
CHO S W,Suito H.Assessment of Calcium-Oxygen Equilibrium in Liquid Iron [J].ISIJ International,1994,34 (3):265.
|
[8] |
CHO S W,Suito H.Assessment of Calcium-Oxygen Equilibrium in Liquid Iron [J].ISIJ International,1994,34 (3):265.
|
[9] |
Kang,YJ,Sichen D,Morita K.Activities of SiO2 in Some CaO-Al2O3-SiO2(-10%MgO) Melts with Low SiO2 Contents at 1873K[J].ISIJ International,2007,47 (6):805 .
|
[9] |
Kang,YJ,Sichen D,Morita K.Activities of SiO2 in Some CaO-Al2O3-SiO2(-10%MgO) Melts with Low SiO2 Contents at 1873K[J].ISIJ International,2007,47 (6):805 .
|
[10] |
李德刚,曹东,朱晓雷等.精炼过程硅和铝脱氧机理分析[J].鞍钢技术,2013 (3):16.
|
[10] |
李德刚,曹东,朱晓雷等.精炼过程硅和铝脱氧机理分析[J].鞍钢技术,2013 (3):16.
|
[1] |
LIU Zhen-tong, YANG Wen, REN Ying, ZHANG Li-feng, WANG Wei-jian. Analysis of influencing factors on effect of calcium treatment in Al-killed steels[J]. Iron and Steel, 2020, 55(3): 29-34. |
[2] |
LÜ Xue-wei, YAN Zhi-ming, PANG Zheng-de, BAI Chen-guang, LIANG Dong, XIE Hao. Effect of Al2O3 on physicochemical properties and structure of blast furnace slag: review[J]. Iron and Steel, 2020, 55(2): 1-10. |
[3] |
LIU Peng, SUI Ya-fei, XU Gang-jun, ZHOU Jun-jun, ZENG Quan-wen. Inclusion generation and control of low carbon steel[J]. Iron and Steel, 2020, 55(2): 67-74. |
[4] |
DONG Wen-liang, PAN Hong-wei, LUO Lei, JI Chen-xi, LI Hai-bo, TIAN Zhi-hong. Phosphorous distribution in dephosphorization slag[J]. Iron and Steel, 2020, 55(2): 75-81. |
[5] |
ZHANG Jun, YAN Ding-liu, WAN Xin-yu, GAO Jian-jun. Comparative test on different dry granulation methods of blast furnace slag[J]. Iron and Steel, 2020, 55(2): 139-143. |
[6] |
LU Yanan,WU Shengli,WANG Laixin,KOU Mingyin. Analysis of chemical compositions of slag affecting #br#
desulphurization in hot metal of COREX process[J]. Iron and Steel, 2019, 54(9): 33-38. |
|
|
|
|