|
|
Effect of pure iron interlayer on properties of hot-roll bonding titanium clad steel plate |
YU Chao,ZHAO Yun-peng,XU Peng-peng,REN Jian-kai,XIAO Hong |
(National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University,Qinhuangdao 066004, Hebei, China) |
|
|
Abstract In the light of the hot-roll bonding of titanium and carbon steel,brittle compounds are easily formed at the composite interface. A titanium and a carbon steel were bonded by vacuum hot rolling using a pure iron interlayer. The microstructure and properties of the composite plate were investigated by optical microscopy and scanning electron microscopy,as well as tensile-shear,bending and tensile tests. The results showed that,at heating temperature of 850 ℃,the bonding strength of the titanium clad steel plate could be improved by adding the pure iron interlayer at low reduction ratio. At heavy reduction ratio,high bonding strength could be achieved with or without the pure iron interlayer. Including the pure iron interlayer improved the bending and tensile properties of the titanium clad steel plate appreciably.
|
Received: 09 April 2018
Published: 20 November 2018
|
|
|
|
[1] |
许哲峰.热压扩散法制备钛钢复合板的研究进展[J].热加工工艺, 2017, (10):14-
|
[1] |
许哲峰.热压扩散法制备钛钢复合板的研究进展[J].热加工工艺, 2017, (10):14-
|
[2] |
Ha J S,Hong S I.Deformation and fracture of Ti/439 stainless steel clad composite at intermediate temperatures[J]. Materials Science and Engineering A,2016(651):805.
|
[2] |
Ha J S,Hong S I.Deformation and fracture of Ti/439 stainless steel clad composite at intermediate temperatures[J]. Materials Science and Engineering A,2016(651):805.
|
[3] |
SU Hang,LUO Xiao-bing,CHAI Feng,et al.Manufacturing technology and application trends of titanium clad steel plates[J].Journal of Iron and Steel Research, 2015, 22(11):977-
|
[3] |
SU Hang,LUO Xiao-bing,CHAI Feng,et al.Manufacturing technology and application trends of titanium clad steel plates[J].Journal of Iron and Steel Research, 2015, 22(11):977-
|
[4] |
Velmurugan C,Senthilkumar V,Sarala S,et al.Low temperature diffusion bonding of Ti-6Al-4V and duplex stainless steel[J]. Journal of Materials Processing Technology,2016(234):272.
|
[4] |
Velmurugan C,Senthilkumar V,Sarala S,et al.Low temperature diffusion bonding of Ti-6Al-4V and duplex stainless steel[J]. Journal of Materials Processing Technology,2016(234):272.
|
[5] |
Kahraman N,Gülen? B,Findik F.Joining of titaniumstainless steel by explosive welding and effect on interface[J].Journal of Materials Processing Technology, 2005, 169(2):127-
|
[5] |
Kahraman N,Gülen? B,Findik F.Joining of titaniumstainless steel by explosive welding and effect on interface[J].Journal of Materials Processing Technology, 2005, 169(2):127-
|
[6] |
XIE M X, ZHANG L J, ZHANG G F,et al.Microstructure and mechanical properties of CP-Ti/X65 bimetallic sheets fabricated by explosive welding and hot rolling[J]. Materials & Design,2015(87):181.
|
[6] |
XIE M X, ZHANG L J, ZHANG G F,et al.Microstructure and mechanical properties of CP-Ti/X65 bimetallic sheets fabricated by explosive welding and hot rolling[J]. Materials & Design,2015(87):181.
|
[7] |
黄淑梅.热轧生产钛钢复合板的技术进展[J]. 钛工业进展,2002(6):45
|
[7] |
黄淑梅.热轧生产钛钢复合板的技术进展[J]. 钛工业进展,2002(6):45
|
[8] |
代响林,刘宝玺,马久乐,等.真空热轧法制备不锈钢复合板组织和力学性能[J].钢铁, 2017, 52(2):65-
|
[8] |
代响林,刘宝玺,马久乐,等.真空热轧法制备不锈钢复合板组织和力学性能[J].钢铁, 2017, 52(2):65-
|
[9] |
骆宗安,陈晓峰,谢广明,等.真空轧制合金钢复合板的组织性能[J].钢铁, 2017, 52(3):64-
|
[9] |
骆宗安,陈晓峰,谢广明,等.真空轧制合金钢复合板的组织性能[J].钢铁, 2017, 52(3):64-
|
[10] |
Momono T,Enjo T,Ikeuchi K.Effect of carbon content on the diffusion bonding of iron and steel to titanium[J].ISIJ International, 1990, 30(11):978-
|
[10] |
Momono T,Enjo T,Ikeuchi K.Effect of carbon content on the diffusion bonding of iron and steel to titanium[J].ISIJ International, 1990, 30(11):978-
|
[11] |
Saboktakin M,Razavi G R,Monajati H.The investigate metallurgical properties of roll bonding titanium clad steel[J].International Journal of Applied Physics and Mathematics, 2011, 1(3):177-
|
[11] |
Saboktakin M,Razavi G R,Monajati H.The investigate metallurgical properties of roll bonding titanium clad steel[J].International Journal of Applied Physics and Mathematics, 2011, 1(3):177-
|
[12] |
YAN J C,ZHAO D S,WANG C W,et al.Vacuum hot roll bonding of titanium alloy and stainless steel using nickel interlayer[J].Materials Science and Technology, 2013, 25(7):914-
|
[12] |
YAN J C,ZHAO D S,WANG C W,et al.Vacuum hot roll bonding of titanium alloy and stainless steel using nickel interlayer[J].Materials Science and Technology, 2013, 25(7):914-
|
[13] |
LUO Z A,WANG G L,XIE G M,et al.Interfacial microstructure and properties of a vacuum hot roll-bonded titanium-stainless steel clad plate with a niobium interlayer[J].Acta Metallurgica Sinica, 2013, 26(6):754-
|
[13] |
LUO Z A,WANG G L,XIE G M,et al.Interfacial microstructure and properties of a vacuum hot roll-bonded titanium-stainless steel clad plate with a niobium interlayer[J].Acta Metallurgica Sinica, 2013, 26(6):754-
|
[14] |
YU C,XIAO H,YU H,et al.Mechanical properties and interfacial structure of hot-roll bonding TA2/Q235B plate using DT4 interlayer[J].Materials Science and Engineering A, 2017, (695):120-
|
[14] |
YU C,XIAO H,YU H,et al.Mechanical properties and interfacial structure of hot-roll bonding TA2/Q235B plate using DT4 interlayer[J].Materials Science and Engineering A, 2017, (695):120-
|
[15] |
王敬忠, 颜学柏, 王韦琪, 等.带夹层材料的爆炸-轧制钛钢复合板工艺研究[J].稀有金属材料与工程, 2010, 39(2):309-
|
[15] |
王敬忠, 颜学柏, 王韦琪, 等.带夹层材料的爆炸-轧制钛钢复合板工艺研究[J].稀有金属材料与工程, 2010, 39(2):309-
|
[1] |
DU Liang, HAN Xiu-li, ZHANG Quan-sheng, ZHOU Xiang, YANG Hong-da, WANG Ying. Quantitative relation between mineralogical structure and metallurgical properties of sinter of import iron ore[J]. Iron and Steel, 2020, 55(6): 38-45. |
[2] |
SUN Chao-fan, FANG Yuan, WANG Ya-qing, LIU Wei. Influence of temper rolling reduction rate on microstructure and mechanical properties of TS290 steel[J]. Iron and Steel, 2020, 55(6): 75-79. |
[3] |
WEI Tong-yu, ZOU De-ning, ZHANG Ying-bo, CHEN Wan-wan. Effect of aluminum on microstructure and properties of high alumina ferritic heat resistant steel[J]. Iron and Steel, 2020, 55(6): 80-83. |
[4] |
WU Zhi-guang, GONG Xue-ting, LI Xin, ZHAO Ji-qing, GONG Zhi-hua. Effect of heat treatment process on creep-rupture property of 20Cr1Mo1VTiB bolt steel[J]. Iron and Steel, 2020, 55(6): 101-106. |
[5] |
SHAO Chun-juan,ZHEN Fan,ZHANG Ji-ming,QU Jin-bo,ZHANG Lei. Effect of sample thinning on DWTT property of heavy wall X80 steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(6): 497-504. |
[6] |
LI Xiao-yuan,SHI Jie. Ballistic behavior of high strength steel targets during high speed impact of projectile[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 429-436. |
|
|
|
|