|
|
Process optimization of aluminum killed steel in Baogang Steel Mill |
LIU Nan,XIN Guang-sheng,WANG Wen-yi |
(Steel Mill, Steel Union Co., Ltd. of Baotou Steel (Group) Corp, Baotou 014010, Nei Mongol, China) |
|
|
Abstract Since the output and the variety of the aluminum killed steel increased in recent years, the production problem of the Al killed steel such as the clogging at the nozzle and the poor flow control due to the high Ca mass percent of the molten steel has attracted more and more attentions of researchers. In order to solve those problems, the problem in the production of the aluminum sedation steel in the No.5 casting machine of the BAO GANG Steel Mill was systematically analyzed. The deoxidization system combined the precipitation deoxidization (primary) and the diffusion deoxidization were used, and a new determination standard was adopted. Also, the refining slag system and the process and parameters of calcium treatment were optimized to control the composition of the molten steel and adjust the position and the angle of the feeding machine and so on, achieving the precision calcium treatment. The scheme was verified by the actual experiment. Compared with the scheme before optimization, a better economic benefit was obtained after the optimization, and the material consumption was saved in a great extent, which conforms to the current consumption of the steel industry and the green intelligentization of the state.
|
Received: 22 March 2018
Published: 20 November 2018
|
|
|
|
[1] |
刘学华, 韩传基 ,蔡开科.等小方坯连铸低碳低硅铝镇静钢可浇性[J]. 北京科技大学学报 2005, 27(4).
|
[1] |
刘学华, 韩传基 ,蔡开科.等小方坯连铸低碳低硅铝镇静钢可浇性[J]. 北京科技大学学报 2005, 27(4).
|
[2] |
龚坚.浸入式水口堵塞机理连铸2001(2): 4
|
[2] |
龚坚.浸入式水口堵塞机理连铸2001(2): 4
|
[3] |
Saxena S K, Sandberg H. Mechanism of clogging of tundish nozzle during continuous casting of aluminum-killed steel. Scan J Metall, 1978, 7(3) 126
|
[3] |
Saxena S K, Sandberg H. Mechanism of clogging of tundish nozzle during continuous casting of aluminum-killed steel. Scan J Metall, 1978, 7(3) 126
|
[4] |
董履仁, 刘新华。钢中大型非金属夹杂北京冶金工业出版社, 1991. 199
|
[4] |
董履仁, 刘新华。钢中大型非金属夹杂北京冶金工业出版社, 1991. 199
|
[5] |
Stone R P. Productivity Impotents in Steelmaking Process control[J]. Iron and Steel Technology, 2006, (1):31.
|
[5] |
Stone R P. Productivity Impotents in Steelmaking Process control[J]. Iron and Steel Technology, 2006, (1):31.
|
[1] |
HOU Xin-mei, LIU Yun-song, WANG En-hui. Effect of ladle-lining refractory on non-metallic inclusions in steel[J]. Iron and Steel, 2020, 55(6): 15-24. |
[2] |
YU Hui-xiang, PAN Ming, YANG De-xin. Behavior of inclusions in ultra-low carbon IF steel during deoxidation and alloying process[J]. Iron and Steel, 2020, 55(6): 46-53. |
[3] |
LIU Zhen-tong, YANG Wen, REN Ying, ZHANG Li-feng, WANG Wei-jian. Analysis of influencing factors on effect of calcium treatment in Al-killed steels[J]. Iron and Steel, 2020, 55(3): 29-34. |
[4] |
DU Yun-cong1,YI Yuan-rong1,2,3,BAI Shu-qi1,MA Zhong-le1,FANG Ming-hang1,MA Wen-qing1. Change of Ca occurrence state in carbonation process of LF refining slag[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(3): 195-203. |
[5] |
WANG Kang, LIU Jian-hui, YANG Shu-feng, LI Jing-she. Evolution of non-metallic inclusions in EAF-LF-VD-CC process of GCr15 bearing steel[J]. Iron and Steel, 2020, 55(2): 48-55. |
[6] |
YANG Jie1,YAO Hai-ming2,WU Zhen-gang1,GAO Qian-yun2. Clogging control of submerged entry nozzle during IF steelproduction by middle-thin slab process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(1): 20-26. |
|
|
|
|