“十三五”中国轧钢技术进步及展望

doi:10.13228/j.boyuan.issn0449-749x.20210324

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (1519 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Under the promotion of the 13th five-year plan,the steel rolling technology of China has made rapid progress and remarkable achievements,presenting a large number of high-level achievements in science and technology. Modern technologies,such as big data,Internet,digitization and intellectualization,provide advanced and efficient means for research and development,production,scientific and technological innovation of high quality and performance steel. The steel output has increased from 1.048 billion tons in 2016 to 13.25 billion tons in 2020,with the self-sufficiency rate of high performance steel exceeding 98.5%,which provides the key basic material support for the national economic development and construction. The development and progress of China's steel rolling technology and the representative scientific and technological achievements during the 13th five-year plan period were briefly introduced and analyzed,focusing on the overall production situation of China's steel rolling products and the representative scientific and technological achievements of steel rolling technology. The key technologies and application of representative scientific and technological achievements are briefly introduced from the aspects of rolling process basis and microstructure controlling,greening rolling,digital and intelligent rolling,development of high strength and performance hot rolling products and advanced hot rolling technology,high performance,high strength,high precision cold rolling products and advanced cold rolling technology. Finally,the future development of steel rolling technology is prospected.

Key words： the 13th five-year plan steel rolling greening digitalization and intellectualization high quality

Received: 26 May 2021

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	KANG Yong-lin

Cite this article:

KANG Yong-lin. China steel rolling technology progress in the 13th five-year plan and prospection[J]. Iron and Steel, 2021, 56(10): 1-15.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20210324 OR http://www.chinamet.cn/Jweb_gt/EN/Y2021/V56/I10/1

[1] 石洪卫. 2017中国钢铁工业年鉴[M]. 北京:中国钢铁工业年鉴编辑委员会,2017. (SHI Hong-wei. 2017 China Steel Yearbook[M]. Beijing:The Editorial Board of China Steel Yearbook,2017.)
[2] 石洪卫. 2018中国钢铁工业年鉴[M]. 北京:中国钢铁工业年鉴编辑委员会,2018. (SHI Hong-wei. 2018 China Steel Yearbook[M]. Beijing:The Editorial Board of China Steel Yearbook,2018.)
[3] 石洪卫. 2019中国钢铁工业年鉴[M]. 北京:中国钢铁工业年鉴编辑委员会,2019. (SHI Hong-wei. 2019 China Steel Yearbook[M]. Beijing:The Editorial Board of China Steel Yearbook,2019.)
[4] 石洪卫. 2020中国钢铁工业年鉴[M]. 北京:中国钢铁工业年鉴编辑委员会,2020. (SHI Hong-wei. 2020 China Steel Yearbook[M]. Beijing:The Editorial Board of China Steel Yearbook,2020.)
[5] 王国栋. 工艺绿色化、装备智能化、产品高质化、供给服务化——建设世界领先的钢铁行业集群[C]//第二届河钢东大国际学术年会论文集. 石家庄:河钢集团有限公司,2018:12.(WANG Guo-dong. Process green equipment intelligent products high quality supply service—Building a word leading steel industry cluste[C]//Proceedings of the 2nd HBIS&NEU Annual International Academic Conference. Shijiazhuang:HBIS,2018:12.)
[6] 康永林,唐荻. 轧钢过程节能减排先进技术[M]. 北京:冶金工业出版社,2020.(KANG Yong-lin,TANG Di. Advanced Technology of Energy Saving and Emission Reduction for Steel Rolling[M]. Beijing:Metallurgical Industry Press,2020.)
[7] 康永林,朱国明,陶功明,等. 高精度型钢轧制数字化技术及应用[J]. 钢铁,2017,52(3):49.(KANG Yong-lin,ZHU Guo-ming,TAO Gong-ming,et al. Digital technology and application of high precision section steel rolling[J]. Iron and Steel,2017,52(3):49.)
[8] 张进之,吴增强. 板带轧制过程动态理论的建立及应用发展过程[C]//第十一届中国钢铁年会论文集. 北京:中国金属学会,2017:3.(ZHANG Jin-zhi,WU Zeng-qiang. Establishment and application development of dynamic theory in plate rolling process[C]//Proceedings of the 11^th CSM Steel Congress,Beijing:The Chinese Society for Metals,2017:3.)
[9] 任新意,王松涛,高敏慧,等. 冷连轧机ESS辊型板形控制性能分析[J]. 钢铁,2018,53(3):50.(REN Xin-yi,WANG Song-tao,GAO Min-hui,et al. Analysis on shape control performance of cold tandem mill with ESS roll profile[J]. Iron and Steel,2018,53(3):50.)
[10] 凌启辉,闫晓强,张清东,等. 热连轧机机液耦合系统振动特性[J]. 钢铁,2017,52(2):51.(LING Qi-hui,YAN Xiao-qiang,ZHANG Qing-dong,et al. Hydraulic-mechanical coupling system dynamics modeling and vibration characteristics of hot trip tandem mill [J]. Iron and Steel,2017,52(2):51.)
[11] 董瀚,翁宇庆,曹文全,等. 基于M³组织调控的钢铁材料基础理论研究与高性能钢技术[J]. 中国冶金,2018,28(2):74.(DONG Han,WENG Yu-qing,CAO Wen-quan,et al. Research on basic theory of iron and steel materials and high performance steel technology based on M³ microstructure control[J]. China Metallurgy,2018,28(2):74.)
[12] 王国栋. 钢铁行业技术创新和发展方向[J]. 钢铁,2015,50(9):1.(WANG Guo-dong. Technology innovation and development direction of iron and steel industry[J]. Iron and Steel,2015,50(9):1.)
[13] 康永林,丁波,陈其安. 我国轧制学科发展现状与趋势分析及展望[J]. 轧钢,2017,34(6):1.(KANG Yong-lin,DING Bo,CHEN Qi-an. Analysis and prospect of developing status and trends of rolling discipline in China[J]. Steel Rolling,2017,34(6):1.)
[14] 毛新平,孙新军,汪水泽. 薄板坯连铸连轧流程钛微合金化控制轧制技术[J]. 钢铁,2016,51(1):52.(MAO Xin-ping,SUN Xin-jun,WANG Shui-ze. Control rolling technology of Ti-microalloyed strip produced by TSCR[J]. Iron and Steel,2016,51(1):52)
[15] 罗许,杨财水,康永林,等. 析出粒子对钛微合金化高强钢奥氏体晶粒长大的影响[J]. 工程科学学报,2016,38(2):230.(LUO Xu,YANG Cai-shui,KANG Yong-lin,et al. Effect of precipitates on the austenite grain growth of titanium microalloyed high performance steel[J]. Chinese Journal of Engineering,2016,38(2):230.)
[16] 王国栋,刘振宇,张殿华. RAL关于钢材热轧信息物理系统的研究进展[J]. 轧钢,2021,38(1):1.(WANG Guo-dong,LIU Zhen-yu,ZHANG Dian-hua. Research progress on the cyber-physical system of steel hot rolling in RAL[J]. Steel Rolling,2021,38(1):1.)
[17] 康永林,田鹏,朱国明. 热宽带钢无头轧制技术进展及趋势[J]. 钢铁,2019,54(3):1. (KANG Yong-lin,TIAN Peng,ZHU Guo-ming. Progress and trend on hot wide strip endless rolling technology[J]. Iron and Steel,2019,54(3):1.)
[18] QIN Zhe,YU Yao,ZHAO Wen,et al. Development and application of ESP products in Rizhao Steel[C]//Proceedings of 2018 International Symposium on Thin Slab Casting and Direct Rolling. Wuhan:The Chinese Society for Metals,BAOWU Steel Group,2018:49.
[19] KANG Yong-lin,TIAN Peng,CHEN Liang,et al. Characteristics analysis of process,micro structure and properties of hot rolled low-carbon/extra low-carbon steels by ESP[C]//Proceedings of 2018 International Symposium on Thin Slab Casting and Direct Rolling. Wuhan:The Chinese Society for Metals,BAOWU Steel Group,2018:33.
[20] CAO G M,LI Z F,LIU Z Y,et al. Oxidation kinetics and spallation model of oxide scale during cooling process of low carbon microalloyed steel[J]. High Temperature Materials and Processes,2017,36(9):927.
[21] 刘鑫,冯光宏,张宏亮,等. 方坯直轧工艺对钢筋组织和性能差异性的影响[J]. 钢铁,2018,53(12):86.(LIU Xin,FENG Guang-hong,ZHANG Hong-liang,et al. Effect of billet direct rolling process on difference in microstructure and mechanical properties of rebar[J]. Iron and Steel,2018,53(12):86.)
[22] 石洪卫. 2017中国钢铁工业年鉴[M]. 北京:中国钢铁工业年鉴编辑委员会,2017.(SHI Hong-wei. 2017 China Steel Yearbook[M]. Beijing:The Editorial Board of China Steel Yearbook,2017.)
[23] 石洪卫. 2018中国钢铁工业年鉴[M]. 北京:中国钢铁工业年鉴编辑委员会,2018. (SHI Hong-wei. 2018 China Steel Yearbook[M]. Beijing:The Editorial Board of China Steel Yearbook,2018.)
[24] WANG Fan,TIAN Peng,KANG Yong-lin,et al. Simulation experimental study on ferrite rolling process of low-carbon steels[J]. Materials Science Forum,2019,944,329.
[25] 邸全康,王全礼,康永林,等. 四线切分控轧控冷装备设计及工艺[J]. 钢铁,2013,48(2):34.(DI Quan-kang,WANG Quan-li,KANG Yong-lin,et al. Design of controlled rolling and cooling equipment of four-strands splitting bar and research of production process[J]. Iron and Steel,2013,48(2):34.)
[26] 康永林,朱国明,陶功明,等. 高精度型钢轧制数字化技术及应用[J]. 钢铁,2017,52(3):49.(KANG Yong-lin,ZHU Guo-ming,TAO Gong-ming,et al. Digital technology and application of high precision section steel rolling[J]. Iron and Steel,2017,52(3):49.)
[27] YAN Xiao-qiang,QI Jie-bin,WANG Xin-xin. An active method suppressing rolling mill vibration disturbance estimation and compensation algorithm[J]. Journal of Iron and Steel Research,International,2019,26:697.
[28] 石洪卫. 2020中国钢铁工业年鉴[M]. 北京:中国钢铁工业年鉴编辑委员会,2020.(SHI Hong-wei. 2020 China Steel Yearbook[M]. Beijing:The Editorial Board of China Steel Yearbook,2020.)
[29] 骆中汉,仇圣桃,陈胜林,等. 薄板坯连铸连轧生产电工钢(取向及无取向)技术开发及应用[J]. 连铸,2017,42(4):42.(LUO Zhong-han,QIU Sheng-tao,CHEN Sheng-lin,et al. Development and application of thin slab continuous casting and rolling technology for electrical steel production (oriented and non-oriented)[J]. Continuous Casting,2017,42(4):42.)
[30] 佚名. 冶金科学技术奖获奖项目简介[J]. 中国冶金,2018,28(5):93. (Anonymity. Brief introduction to the projects winning Metallurgical Science and Technology Award[J]. China Metallurgy,2018,28(5):93.)
[31] 王昭东,陈林恒,邓想涛,等. 高品质系列低合金耐磨钢板研制开发与工业化应用[J]. 中国冶金,2018,28(8):88.(WANG Zhao-dong,CHEN Lin-heng,DENG Xiang-tao,et al. Development and industrial application of high quality series low alloy wear resistant steel plate[J]. China Metallurgy,2018,28(8):88.)
[32] 刘宝权,王军生,张岩,等. 带钢冷连轧液压与伺服控制[M]. 北京:科学出版社,2016.(LIU Bao-quan,WANG Jun-sheng,ZHANG Yan,et al. Hydraulic Servo Control of Cold Strip Mill[M]. Beijing:Science Press,2016.)
[33] 龚坚,李军,黎先浩,等. 后期渗氮工艺制备取向硅钢的组织转变[J]. 钢铁研究学报,2016,28(8),71.(GONG Jian,LI Jun,LI Xian-hao,et al. Microstructure evolution in grain oriented silicon steel produced by nitriding technique[J]. Journal of Iron and Steel Research,2016,28(8):71.)
[34] 何安瑞,荆丰伟,刘超,等. 薄板坯连铸连轧过程控制技术的发展及应用[J]. 轧钢,2020,37(3):1.(HE An-rui,JING Feng-wei,LIU Chao,et al. Development and application of process control technologies of thin slab continuous casting and rolling[J]. Steel Rolling,2020,37(3):1.)