热改性对柱状活性炭脱硫能力的影响

doi:10.13228/j.boyuan.issn0449-749x.20210618

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (2097 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Five kinds of modified activated carbons (AC-1 to AC-5) were obtained by thermal modification of columnar activated carbons at different temperatures under the protection of N₂. The activated carbons (AC) before and after modification were placed in the condition containing SO₂ and in the presence of water vapor and oxygen respectively for desulfurization experiment. The physical properties of activated carbon surface before and after modification were characterized by gas adsorption apparatus and scanning electron microscope. The experimental results show that when the modification temperature is 700-900 ℃, the desulfurization ability of the modified activated carbon increases with the increase of the modification temperature, when the modification temperature is 900 ℃, the desulfurization ability of the activated carbon is the strongest, when the modification temperature is 1 100 ℃, the desulfurization ability of the activated carbon decreases obviously. Gas adsorption apparatus of the proceeds of the BET the results of the analysis, and scanning electron microscopy the results show that activated carbon part was blocked in the process of heating channel is opened, increase its adsorption surface area, to improve the initial activated carbon desulfurization rate is good, but too high temperature will destroy the original structure of aperture, activated carbon in AC-4 and AC-5 samples of the desulfurization ability becomes poor. In addition, temperature-programmed desorption technology (TPD) was used to analyze the pH content of activated carbon samples from AC to AC-4. The results showed that there was a good proportional linear relationship between the ph content of strong alkali center on the surface of activated carbon and its desulfurization ability. By comparing the samples AC-2 and AC-3, it can be found that under the condition of little difference in the physical properties of activated carbon, the improvement of its desulfurization ability mainly benefits from the change of surface chemical properties, especially the enhancement of alkalinity. At the same time, through the Boehm titration and combined with Fourier transform infrared spectrometer (FTIR) of activated carbon samples AC and AC-3 the surface acidic functional groups of change were analyzed, and found that the thermal modified activated carbon surface carboxyl, lactone and decrease in the number of hydroxyl groups, shows that heat treatment can make the surface acidic functional groups of activated carbon decomposition, is helpful to promote its desulfurization ability.

Key words： actived carbon adsorption thermal modification desulfurization functional group

Received: 10 October 2021

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	SHE Xue-feng
	LIU Song-hao
	WANG Yan-jiang
	WANG Jian-fang
	WANG Jing-song
	XUE Qing-guo

Cite this article:

SHE Xue-feng,LIU Song-hao,WANG Yan-jiang等. Effect of thermal modification on desulfurization capacity of column activated carbon[J]. Iron and Steel, 2022, 57(4): 130-137.

URL:

http://www.chinamet.cn/Jweb_gt/EN/10.13228/j.boyuan.issn0449-749x.20210618 OR http://www.chinamet.cn/Jweb_gt/EN/Y2022/V57/I4/130

[1] 胡浪,何传超,罗国民.国内烧结节能技术发展趋势研究[J].冶金能源,2021,40(1):13.(HU Lang, HE Chuan-chao, LUO Guo-min. Research on the development trend of sintering energy saving technology in China[J]. Energy for Metallurgical Industry,2021,40(1):13.)
[2] 杨莹莉,郑继旭,袁仙民,等.基于活性焦的烧结烟气硫氮协同脱除技术及工程应用[J].冶金能源,2020,39(4):60.(YANG Ying-li,ZHENG Ji-xu, YUAN Xian-min, et al.Synergistic removal technology of sulfur and nitrogen in sintering flue gas based on active coke and application in engineering[J]. Energy for Metallurgical Indussstry,2020,39(4):60.)
[3] 王涛,谢春帅.烧结烟气循环技术研究进展与展望[J].冶金能源,2020,39(2):55.(WANG Tao, XIE Chun-shuai. Research progress and prospect of sintering flue gas recycling technology[J]. Energy for Metallurgical Industry,2020,39(2):55.)
[4] 蔡九菊.钢铁工业的空气消耗与废气排放[J]. 钢铁,2019,54(4):1.(CAI Jiu-ju. Air consumption and waste gas emission of steel industry[J]. Iron and Steel,2019,54(4):1.)
[5] 佚名.关于钢铁企业烧结、焦化烟气超低排放情况的调研报告[J]. 中国冶金,2018,28(11):84.(YI Ming. Investigation report on ultra-low emission of sintering and coking flue gas in iron and steel enterprises[J]. China Metallurgy,2018,28(11):84.)
[6] 周茂军,张代华. 宝钢烧结烟气超低排放技术集成与实践[J]. 钢铁,2020,55(2):144.(ZHOU Mao-jun,ZHANG Dai-hua. Integration and practice of ultra-low emission technology for sintering flue gas in Baosteel[J]. Iron and Steel,2020,55(2):144.)
[7] 方弘,李洲,马丹竹,等. 烟气脱硫活性炭改性方法研究进展[J]. 冶金能源,2017,36(6):56.(FANG Hong,LI Zhou,MA Dan-zhu,et al. Research progress of modified activated carbon for flue gas desulfurization[J]. Energy for Metallurgical Industry,2017,36(6):56.)
[8] 戴晓天,陈乾业,齐渊洪,等.高炉煤气精脱硫技术的半工业试验[J].钢铁,2021,56(12):153.(DAI Xiao-tian, CHEN Qian-ye, QI Yuan-hong, et al. Pilot plant test of BF gas deep desulfurization technology[J]. Iron and Steel, 2021, 56(12): 153.)
[9] 潘建, 马雯卓, 朱德庆, 等. 低阶煤一步法制备活性炭的脱硫脱硝性能[J]. 钢铁, 2021, 56(12): 142.(PAN Jian, MA Wen-zhuo, ZHU De-qing, et al. Desulfurization and denitrification performance of activated carbon prepared by one-step method from low-rank coal[J]. Iron and Steel, 2021, 56(12): 142.)
[10] 李开喜,凌立成,刘朗,等. 氨水活化的活性炭纤维的脱硫作用[J]. 环境科学学报,2001,21(1):74.(LI Kai-xi,LING Li-cheng,LIU Lang,et al. Desulphurization of ammonia-activated activated carbon fibers[J]. Journal of Environmental Science,2001,21(1):74.)
[11] Lisovskii A,Shter G E,Semiat R,et al. Adsorption of sulfur dioxide by active carbon treated by nitric acid:Ⅱ. Effect of preheating on the adsorption properties[J]. Carbon,1997,35(11):1645.
[12] MA Shuang-chen,YAO Juan-juan,JIN Xin,et al. Kinetic study on desulfurization and denitrification using Microwave irradiation over activated carbon[J]. Science China,2011,54(9):2321.
[13] Alvarez-Torrellas S, Martin-Martinez M, Gomes H T, et al. Enhancement of p-nitrophenol adsorption capacity through N₂-thermal-based treatment of activated carbons[J]. Applied Surface Science, 2017, 414(31):424.
[14] 韩庆虹,金永龙,苍大强,等. 微波改性对吸附剂脱硫脱氮性能的影响研究[J]. 钢铁,2009,44(6):85.(HAN Qing-hong,JIN Yong-long,CANG Da-qiang,et al. Effect of microwave modification on desulfurization and denitrification performance of adsorbent[J]. Iron and Steel,2009,44(6):85.)
[15] Yuan J, Amano Y, Machida M. Surface modified mechanism of activated carbon fibers by thermal chemical vapor deposition and nitrate adsorption characteristics in aqueous solution[J]. Colloids and Surfaces A:Physicochemical and Engineering Aspects, 2019, 580(2):123710.
[16] Davini P. Influence of surface properties and iron addition on the SO₂ adsorption capacity of activated carbons[J]. Carbon,2002,40(5):729.
[17] Boehm H P. Some aspects of the surface chemistry of carbon blacks and other carbons[J]. Carbon,1994,32(5):759.
[18] Mochida I, Kuroda K, Miyamoto S, et al. Remarkable catalytic activity of calcined pitch based activated carbon fiber for oxidative removal of SO₂ as aqueous H₂SO₄[J]. Energy and Fuels, 1997, 11(2):272.
[19] Andreoli S, Eser S. Relating reactivity to structure in cokes and carbon materials: Temperature-programmed oxidation and microscopy techniques[J]. Carbon, 2020,168:362.
[20] Toebes M L,Heeswijk J M P,Bitter J H,et al. The influence of oxidation on the texture and the number of oxygen-containing surface groups of carbon nanofibers[J]. Carbon,2004,42(2):307.
[21] 李开喜,凌立成,刘朗,等. 热处理改性的活性炭纤维的脱硫活性[J]. 催化学报,2000,21(3):264.(LI Kai-xi,LING Li-cheng,LIU Lang,et al. Desulphurization activity of heat-treated modified activated carbon fibers[J]. Catalytic Reports,2000,21(3):264.)