M50NiL轴承钢渗层碳化物特征与滑动磨损行为的研究

吝欢1,2,王凯2,3,杨卯生2,曹建春3,宋波1,刘天祥2,3

钢铁研究学报 ›› 2022, Vol. 34 ›› Issue (7) : 701-712.

钢铁研究学报 ›› 2022, Vol. 34 ›› Issue (7) : 701-712. DOI: 10.13228/j.boyuan.issn1001-0963.20210258
材料研究

M50NiL轴承钢渗层碳化物特征与滑动磨损行为的研究

  • 吝欢,王凯,杨卯生,曹建春,宋波,刘天祥
作者信息 +

Research on carbide characteristics and sliding wear behavior of carburized layer of M50NiL bearing steel

  • LIN Huan,WANG Kai,YANG Maosheng,CAO Jianchun,SONG Bo,LIU Tianxiang
Author information +
文章历史 +

摘要

摘要:研究了M50NiL轴承钢在不同磨损时间和外加应力作用下的磨损行为和机制。结果表明:渗碳层组织为孪晶马氏体和近球状MC、M23C6和棒状M2C型碳化物。外加应力对钢的磨损形式与形貌具有显著影响,钢的磨损形式为轻微粘着磨损和磨料磨损,摩擦因数较快保持稳定到0.02。延长磨损时间对钢的磨损性能与机制具有明显作用,磨损时间达到3万s,MC、M23C6、M2C脱落,部分碳化物破碎形成磨料磨损。磨损时间与外加应力耦合作用显著影响钢的磨损性能与质量,磨损时间为3000s,外加应力由0306MPa增至1530MPa,碳化物导致磨料磨损,磨损质量由025mg增至038mg;外加应力增至2142MPa,更多大尺寸碳化物脱落,导致钢的摩擦因数逐渐升高至0037,磨损质量达到033mg。

Abstract

Abstract: The wear behavior and wear mechanism of M50NiL bearing steel under different wear times and applied stresses were studied. The results show that the microstructure of the carburized layer is composed of twin martensite, nearly spherical MC, M23C6 and rodlike M2C carbides. The applied stress has a significant effect on the wear form and morphology of steel. The wear forms of the steel are slight adhesive wear and abrasive wear. The friction coefficient of the steel keeps stable to 002. Prolonged wear time has an obvious effect on the wear property and mechanism of steel. When the wear time reaches 30000s, MC, M23C6 and M2C carbides rub off. Some carbides are broken and subsequently formed abrasive wear. The coupling effect of wear time and applied stress significantly affect the wear property and quality of steel. When the wear time is 3000s, the applied stress increases from 0306MPa to 1530MPa. The wear weightloss increases from 025mg to 038mg due to carbides abrasive wear. When the applied stress increases to 2142MPa, large scale carbides rub off. This leads to the increasing of the friction coefficient to 0037 and the wear mass to 033mg.

关键词

关键词:M50NiL轴承钢 / 碳化物 / 摩擦因数 / 磨料磨损 / 磨损机制

Key words

Key words:M50NiL bearing steel / carbide / friction coefficient / abrasive wear / wear mechanism

引用本文

导出引用
吝欢1,2,王凯2,3,杨卯生2,曹建春3,宋波1,刘天祥2,3. M50NiL轴承钢渗层碳化物特征与滑动磨损行为的研究[J]. 钢铁研究学报, 2022, 34(7): 701-712 https://doi.org/10.13228/j.boyuan.issn1001-0963.20210258
LIN Huan1,2,WANG Kai2,3,YANG Maosheng2,CAO Jianchun3,SONG Bo1,LIU Tianxiang2,3. Research on carbide characteristics and sliding wear behavior of carburized layer of M50NiL bearing steel[J]. Journal of Iron and Steel Research, 2022, 34(7): 701-712 https://doi.org/10.13228/j.boyuan.issn1001-0963.20210258

0

Accesses

0

Citation

Detail

段落导航
相关文章

/