低碳铌钒微合金化钢奥氏体连续冷却转变行为

钢铁研究学报 ›› 2013, Vol. 25 ›› Issue (8) : 28-31.

材料研究

包俊成¹，赵捷¹，宁保群¹，马俊兴²，李建平³

作者信息 +

Transformation Behavior of Austenite Continuous Cooling for Nb-V Micro-Alloyed Low Carbon Steel

BAO Jun-cheng¹,ZHAO Jie¹,NING Bao-qun¹,MA Jun-xing²,LI Jian-ping³

Author information +

文章历史 +

摘要

用Gleeble-3800热模拟试验机结合金相分析研究了低碳Nb-V微合金化钢奥氏体连续冷却过程的相变规律。结果表明：试验钢的动态CCT曲线和静态CCT曲线相比，整体向左上方移动，随冷却速度的增大，A→α-Fe相变开始温度逐渐降低；高温变形促进铁素体和珠光体相变，缩小了铁素体转变区；当冷速较低时变形促进贝氏体转变，冷速较高时变形抑制贝氏体转变。

Abstract

The transformation behavior of Nb-V micro-alloyed low carbon austenite steel during continuous cooling was investigated through Gleeble-3800 themomechanical simulator and metallographic analysis. The experimental results show that the dynamic CCT diagrams shift to the left and upper compared with the static ones, the begin temperature of A→α-Fe transformation is gradually lower with the increase of cooling rate. The high temperature deformation improves Ferrite and Pearlite transformation and decreases Ferrite transformation zone. When the cooling rate is lower, the deformation improves Bainite transformation; when the cooling rate is higher, the deformation restrains Bainite transformation.

导出引用

包俊成，赵捷，宁保群，马俊兴，李建平. 低碳铌钒微合金化钢奥氏体连续冷却转变行为[J]. 钢铁研究学报, 2013, 25(8): 28-31

BAO Jun-cheng,ZHAO Jie,NING Bao-qun,MA Jun-xing,LI Jian-ping. Transformation Behavior of Austenite Continuous Cooling for Nb-V Micro-Alloyed Low Carbon Steel[J]. Journal of Iron and Steel Research, 2013, 25(8): 28-31

参考文献

[1] 翁宇庆．超细晶钢－钢的组织细化理论与控制技术[M]．北京：冶金工业出版社，2003．124-127．

[2] 田村今男，王国栋，刘振宇，等．高强度低合金钢的控制轧制和控制冷却[M]．北京：冶金工业出版社，1992．14-35．

[3] 李龙，丁桦，杨春征，等．控轧控冷工艺对低碳铌微合金钢组织和性能的影响[J]．钢铁研究学报．2006，18(7)：46-51．

[4] 崔忠圻．金属学与热处理[M]．北京：机械工业出版社，2000．238-256．

[5] 冯岩青，王福明．冷轧变形量对Nb-V微合金化IF钢组织和性能的影响[J]．特殊钢．2012, 33(1)：65-68．

[6] 陈红桔，刘清友，韩力，等．控轧控冷工艺对铌钛微合金钢组织和性能的影响[J]．钢铁研究学报．1999，11(3)：38-43

[7] 苑少强，张凤梅．含Nb多元微合金钢的应变诱导析出行为[J]．辽宁工程技术大学学报．2006，25(4)：592-594．

[8] 衣海龙，杜林秀，王国栋，等．含铌微合金低碳钢的连续冷却过程的相变[J]，东北大学学报(自然科学版)，2005，26(8)：743-746．

[9] 杜林秀．低碳钢变形过程及冷却过程的组织演变与控制[D]．沈阳：东北大学，2003．

[10] Khlestov V M, Konopleva E V, Mcqueen H J. Kinetics of austenite transformation during thermomechanical processes[J]. Canadian Metallurgical Quarterly,1998,37(2)：75-89．

[11] Wang Guodong, Liu Xianghua, Wang Zhaodong. Effect of hotdeformation on continuous cooling bainite transformation in alow carbon steel[A]. THERMEC-97 Conference[C]. Australia: Wollongon, 1997. 717-723．