Abstract��The ultrahigh- basicity mold flux for industrial application(binary basicity of 1. 74) was selected and solidified by an improved water- cooled copper probe. Different probe immersion times were adopted to analyze the solidification process of films. The growth speeds and closed porosities of solid films were measured. The crystallization processes by solidification and devitrification were also analyzed, respectively. The results indicate that the growth speed of the solid slag film during the initial solidification period (0-15s) is 79. 9��m/s. 2CaO��SiO2��NaF with small spherical shapes is the primary crystal which leads to devitrification. The average devitrification speed of the glassy film is 65��m/s, and the primary crystal in the outer layer of solid films is lathlike cuspidine(3CaO��2SiO2��CaF2). The growth of the lathlike cuspidine in the outer layer of films increases the closed porosity and decreases the effective thermal conductivity of solid slag films.
���죬����ƽ����ǫ. �������������������Ĥ���̺ͽᾧ��Ϊ����[J]. �����о�ѧ��, 2018, 30(1): 21-25.
LONG Xiao,HE Sheng- ping,WANG Qian. Crystallization features of solid slag films of ultrahigh- basicity mold fluxes for continuous casting. , 2018, 30(1): 21-25.
S. Hiraki, K. Nakajima, T. Murakami, et al. Influence of mold heat fluxes on longitudinal surface cracks during high speed continuous casting of steel Slab //[C]. Steelmaking Conference Proceedings,1994:397-403
H. Nakato, M. Ozawa, K. Kinoshita, et al. Factors affecting the formation of shell and longitudinal cracks in mold during high-speed continuous casting of slabs [J]. Trans. ISIJ,1984,24(11):957-965.
X. Long, S. He, L. Zhu, et al. Effects of Crystallization of mould fluxes on property of liquid slag film and its impact on peritectic steel slab continuous casting//. 4th International Symposium on High Temperature Metallurgical Processing, San Antonio, America, Mar. 2013:155.
[8]
X. Long, S. He, J. Xu, et al. Properties of High Basicity Mold Fluxes for Peritectic Steel Slab Casting[J]. Journal of Iron and Steel Research International. 2012, 19(7):39-45.
[9]
S. He, X. Long, J. Xu, et al. Effects of crystallization behaviour of mould fluxes on properties of liquid slag film[J]. Ironmaking & Steelmaking. 2012, 39(8):593-598.
[10]
H. Ryu, Z. Zhang, J. W. Cho, et al. Crystallization behaviors of slags through a heat flux simulator [J]. ISIJ International. 2010, 50(8): 1142-1150.
[11]
K. Lara Santos Assis: Heat transfer through mold fluxes: a new approach to measure thermal properties of slags [ Dissertation], Pittsburgh: Carnegie Mellon University, 2016.
[12]
X. Long, S. He, Q. Wang, et al. Development of Ultrahigh-Basicity Mold Fluxes for Peritectic Steel Continuous Casting//. Materials Processing Fundamentals 2017, San Diego, America, Mar. 2017:3.
2018, Vol. 30 
