[1] 王瑞敏, 桂江兵, 任安超. 国内外帘线钢盘条实物质量对比分析[J]. 金属制品, 2015, 41(6):49.</br>(Wang R M, Gui J B, Ren A C. Actual product quality comparison analysis of domestic and overseas tire cord steel wire rod[J]. Metal Products, 2015, 41(6):49.)</br>[2] 汤伟, 郭建龙, 王敏, 等. 82A帘线钢断口断裂形式及原因分析[J]. 金属材料与冶金工程, 2016, (6):9.</br>(Tang W, Guo J L, Wang M, et al. Fracture form and cause analysis of 82A tire cord steel[J]. Metal Materials & Metallurgy Engineering, 2016, (6):9.)</br>[3] 陶学伟, 王章忠, 毛向阳, 等. 高强度钢帘线制造技术研究进展[J]. 热加工工艺, 2015, 44(14):29.</br>(Tao X, Wang Z Z, Mao X Y, et al. Research progress in manufacturing technique of high-strength cord steel[J]. Hot Working Technology, 2015, 44(14):29..)</br>[4] Yang Y S, Bae J G, Park C G. Improvement of thebending fatigue resistance of the hyper-eutectoid steelwires used for tire cords by a post-processing annealing[J]. Materials Science and Engineering A, 2008, 488:554.</br>[5] Liu H Y, Wan B Y, Zeng X Y, et al. Effect of V and N on microstructures and properties of grade-70 tire cord steel during cold drawing[J]. Journal of Iron & Steel Research International, 2015, 22(2):171.</br>[6] Cai X F, Bao Y P, Wang M, et al. Investigation of precipitation and growth behavior of Ti inclusions in tire cord steel[J]. Metallurgical Research & Technology, 2015, 112(4):407.</br>[7] Minamida T, Hiraga N, Shibata T. Developments in steel cord wire rods[J]. Kobe Steel Engineering Reports, 2000, 50(3):31.</br>[8] Yamada Y, Shimazu S. Wire rod for higher breakingstrength steel cord[J]. Wire Journal International, 1986, (4):53.</br>[9] Shinsho Y, Nozaki T. Influence of secondary steelmaking on occurrence of nonmetallic inclusion in high carbon steel for tire cord[J]. Wire Journal International, 1998, (9):145.</br>[10] Zhang J, Xue Z L, Jiang Y D, et al. Research on precipitation of titanium inclusions during　solidification of tire cord steel SWRH82A[J]. Metalurgia International, 2014, 19(1):34.</br>[11] Jiang Y D, Xue Z L, Zhang J. Genetic analysis for large TiN inclusions in wire rod for tire cord steel of SWRH82A[J]. Journal of Iron and Steel Research International, 2014, 21(s1):91.</br>[12] Liu H Y, Zheng J Q, Li Y H, et al. Investigation of Ti inclusions in tire cord steel[J]. Journal of University of Science & Technology Beijing, 2010, 32(7):866.</br>[13] Maeda S, Soejima T, Matsumoto H, et al. Shape control of inclusions in wire rRods for high tensile tire cord by refining with synthetic slag[A]. 1989 Steelmaking Conference Proceedings[C]. ISS, Chicago, lllions, USA, 1989, 72: 379.</br>[14] 辛彩萍, 岳峰, 吴启帆. 精炼渣和氧含量对钢帘线盘条夹杂物和断丝指数的影响[J]. 特殊钢, 2014, 35(4):62.</br>(Xin C P, Yue F, Wu Q F. Influence of reefing slag and oxygen content on inclusions in coil for steel cord for tyre and wire fracture index[J]. SPECIAL STEEL, 2014, 35(4):62. )</br>[15] Maeda S, Soejima T, Saito T. Shape control of inclusionsin wire rods for high tensile tire cord by refining with syntheticslag[C] //Steelmaking Conference Proceedings, 1989:379.</br>[16] Kang Y B, Lee H G. Inclusions chemistry for Mn/Si deoxidized steels: thermodynamic predictions and experimental confirmations[J]. ISIJ Int, 2004, 44(6):1006.</br>[17] Kawahara J, Tanabe K, Banno T, et al. Advance of valve spring steel[J]. Wire Journal International (USA) , 1992, 25(11):55.</br>[18] 王勇, 段宏韬, 王立峰, 等. LF精炼渣成分对帘线钢中铝含量的影响[J]. 钢铁研究学报, 2013, 25(3):18. </br>(Wang Y, Duan H T, Wang L F, et al. Effect of slag compositions on [Al] contents in LF process[J]. Journal of Iron & Steel Research, 2013, 25(3):18.)</br>[19] He X, Chen S, Wang X, et al. Research on transformation mechanism of oxide inclusion in tire cord steel[J]. Transactions of the Indian Institute of Metals, 2014, 67(6):919.</br>[20] 王昆鹏, 姜敏, 赵昊乾, 等. 帘线钢生产过程中氧化物夹杂的演变规律[J]. 钢铁, 2016, 51(4):31.</br>(Wang K P, Jiang M, Zhao H Q, et al. Characterization on changes of oxide inclusions in production process of tire cord steel[J]. Iron & Steel, 2016, 51(4):31.)</br>[21] 何肖飞, 王新华, 陈书浩, 等. 低碱度低氧化铝精炼渣对帘线钢夹杂物控制[J]. 钢铁, 2014, 49(6):30.</br>(He X F, Wang X H, Chen S H, et al. Inclusion control of tire cord steel based on refing slag of low basicity and low alumina content[J]. Iron & Steel, 2014, 49(6):30.)</br>[22] 曾建华, 陈永, 王新华, 等. 帘线钢精炼工艺技术研究[J]. 钢铁钒钛, 2015, 36(6):94.</br>(Zeng J H, Chen Y, Wang X H, et al. Study on refining technology of high quality cord steel production[J]. Iron Steel Vanadium Titanium, 2015, 36(6):94.)</br>[23] 陈书浩, 王新华, 何肖飞, 等. 帘线钢中酸溶铝含量的变化及其对夹杂物的影响[J]. 钢铁, 2011, 46(10):42.</br>(Chen S H, Wang X H, He X F, et al. Effect of acid-soluble aluminum on inclusions in tyre cord steel[J]. Iron & Steel, 2011, 46(10):42.)</br>[24] 赵烁, 曾建华, 古隆建, 等. 精炼渣控制82B帘线钢中夹杂物形态的实验室研究[J]. 中国冶金, 2010, 20(6):25.</br>(Zhao S, Zeng J H, Gu L J, et al. Experimental research of morphology control of inclusions by using refining slag for 82B tire cord steel[J]. China Metallurgy, 2010, 20(6):25.)</br>[25] 陈亮, 陈天明, 曾建华, 等. 帘线钢夹杂物塑性化控制的实验室研究[J]. 钢铁研究, 2010, 38(3):13.</br>(Chen L, Chen T M, Zeng J H, et al. Laboratory research on control of plastic inclusions for cord steel[J]. Research on Iron & Steel, 2010, 38(3):13.)</br>[26] 辛彩萍, 岳峰, 蒋晨旭, 等. 顶渣对帘线钢中夹杂物塑性化的控制[J]. 中国冶金, 2015, 25(4):33. </br>(Xin C P, Yue F, Jiang C X, et al. Controlling the plastic inclusions in tire cord steel by top slag[J]. China Metallurgy, 2015, 25(4):33.)</br>[27] Guo C, Ling H, Zhang L, et al. Effect of slag basicity adjusting on inclusions in tire cord steels during ladle furnace refining process[J]. Metallurgical Research & Technology, 2017, 114(6):602.</br>[28] He X F, Wang X H, Chen S H, et al. Inclusion composition control in tyre cord steel by top slag refining[J]. Ironmaking & Steelmaking, 2014, 41(9):676. </br>[29] 张敏. 帘线钢中氧化物夹杂塑性化控制技术研究[J]. 炼钢, 2014, 30(6):62.</br> (Zhang M. Study on plasticization control of oxide inclusions in tire cord steel[J]. Steelmaking, 2014, 30(6):62.)</br>[30] 李西德, 邓深, 杨跃标, 等. SWRH82B硬线钢CaO-Al2O3-SiO2系夹杂物塑性化控制的生产实践[J]. 中国冶金, 2018, 28(2):61.</br> (Li X D, Deng S, Yang Y B, et al. Productive practice of plastic deformation control of CaO-Al2O3-SiO2 inclusions in SWRH82B hard wire steel[J]. China Metallurgy, 2018, 28(2):61.)</br>[31] 代宁池, 包燕平, 王敏, 等. CAS-LF-VD精炼过程82A帘线钢中夹杂物的转变[J]. 特殊钢, 2015, 36(4):45.</br>(Dai N C, Bao Y P, Wang M, et al. Transformation of inclusions in steel 82A for tire cord during CAS-LF-VD refining process[J]. SPECIAL STEEL, 2015, 36(4):45.)</br>[32] 陈书浩, 何肖飞, 姜敏, 等. 帘线钢冶炼过程夹杂物转变的控制[J]. 特殊钢, 2012, 33(1):41. </br>(Chen S H, He X F, Jiang M, et al. Control of inclusion transformation in steelmaking process of tyre cord steel[J]. SPECIAL STEEL, 2012, 33(1):41.)</br>[33] 张国兴, 何生平, 王谦, 等. 高碳帘线钢精炼渣组成探讨[C]// 中国金属学会青年学术年会. 2008. </br>(Zhang G X, He S P, Wang Q, et al. Discuss on composition of refining slag for tire cord steel[C]// Young academic annual meeting of China metal society. 2008.)</br>[34] 辛彩萍, 岳峰, 田罗林, 等. 顶渣成分对夹杂物塑性化的影响[J]. 钢铁, 2015, 31(1):48. </br>(Xin C P, Yue F, Tian L L, et al. The influence of top slag composition on plasticization of CaO-Al2O3-SiO2-MgO inclusions[J]. Iron & Steel, 2015, 31(1):48.)</br>[35] Chen S H, Jiang M, He X F, et al. Top slag refining forinclusion composition transform control in tire cord steel[J]. International Journal of Minerals, Metallurgy, and Materials, 2012, 19(6):490.</br>[36] Chen S H, Wang X H, He X F, et al. Industrialapplication of desulfurization using low basicity refining slag intire cord steel [J]. Journal of Iron and Steel Research International, 2013, 20(1):26.</br>[37] 刘宏玉, 周鹏, 万宝义, 等. 帘线钢的研究进展[C]// 金属制品行业技术信息交流会. 2012. </br>(Liu H Y, Zhou P, Wan B Y, et al. Research progress of tire cord steel[C]// Technical information exchange meeting for metal products industry. 2012.)</br>[38] 王勇, 周玉丽, 陈明跃. 帘线钢质量影响因素及控制措施[J]. 天津冶金, 2005, (6):36.</br>(Wang Y, Zhou Y L, Chen M Y. The influence factors and control measures of quality for tire cord steel[J]. TIANJIN METALLURGY, 2005, (6):36. )</br>[39] 崔怀周, 赵昊乾, 陈伟庆. 国内外帘线钢盘条中夹杂物对比[J]. 炼钢, 2011, 27(6):74.</br>(Cui H Z, Zhao H Q, Chen W Q. Contrast of inclusions in wire rod for steel cord from domestic and overseas[J]. Steelmaking, 2011, 27(6):74..)</br>[40] 坂本浩一, 杉村朋子, 吉田敦彦, 等. 具有高疲劳强度和高冷加工性的高洁净度钢的生产方法:中国, CN1836052A[P]. 2006-9-20. </br>(坂本浩一, 杉村朋子, 吉田敦彦, et al. A method of producing high-purity steel with high fatigue strength and high cold processing: China, CN1836052A[P]. 2006-9-20.)</br>[41] 赵素华, 潘秀兰. 帘线钢生产新技术[J]. 鞍钢技术, 2008, (5):9.</br>(Zhao S H, Pan X L. New technology of cord wire steel production[J]. ANGANG TECHNOLOGY, 2008, (5):9.)</br>[42] Cui H Z, Chen W Q, et al. Effect of boron on morphology of inclusions in tire cord steel[J]. Journal of Iron & Steel Research International, 2012, 19(4):22.</br>[43] Michelic S K, Loder D, Reip T, et al. Characterization of TiN, TiC and Ti(C,N) in titanium-alloyed ferritic chromium steels focusing on the significance of different particle morphologies[J]. Materials Characterization, 2015, 100:61.</br>[44] 薛正良, 金武涛, 雷家柳, 等. 帘线钢生产中钛夹杂的析出与控制[J]. 炼钢, 2016,32(4):23.</br>(Xue Z L, Jin W T, Lei J L, et al. Precipitation and control of titanium inclusions in tire cord steel production[J]. Steelmaking, 2016,32(4):23.)</br>[45] Descotes V, Migot S, Robaut F, et al. TEM characterization of a titanium nitride (TiN) inclusion in a Fe-Ni-Co maraging steel[J]. Metallurgical & Materials Transactions A, 2015, 46(7):2793.</br>[46] 雷家柳, 赵栋楠, 朱航宇, 等. 不同强度级别帘线钢中钛夹杂性质的探索[J]. 炼钢, 2018, 34(4):66.</br>(Lei J L, Zhao D N, Zhu H Y, et al. Exploration on the properties of titanium inclusion in tire cord steel of different strength grades[J]. Steelmaking, 2018, 34(4):66.)</br>[47] Liu H Y, Wan B Y, Zeng X Y, et al. Effect of V and N on microstructures and properties of grade-70 tire cord steel during cold drawing[J]. Journal of Iron & Steel Research International, 2015, 22(2):171.</br>[48] Cai X F, Bao Y P, Wang M, et al. Investigation of precipitation and growth behavior of Ti inclusions in tire cord steel[J]. Metallurgical Research & Technology, 2015, 112(4):407.</br>[49] 傅杰, 朱剑, 迪林, 等. 微合金钢中TiN的析出规律研究[J]. 金属学报, 2000, 36(8):801.</br>(Fu J, Zhu J, Di L, et al. Study on the precipitation behavior of TiN in the microalloyed steels[J]. ACTA METALLURGICA SINICA, 2000, 36(8):801.)</br>[50] Ma W J, Bao Y P, Zhao L H, et al. Controlof the precipitation of TiN inclusions in gear steels[J]. International Journal of Minerals Metallurgy ＆ Materials,2014, 21(3):234.</br>[51] Liu H Y, Wang H L, Li L, et al. Investigation of Ti inclusionsin wire cord steel[J]. Ironmaking ＆ Steelmaking, 2011, 38( 1):53.</br>[52] 罗通伟. 0Cr18Ni10Ti 钢中TiN 夹杂物的危害及应对措施[J].特钢技术, 2014, 20(3):1.</br>(Luo T W. Harmfulness of TiN inclusion in 0Cr18Ni10Ti and countermeasures for its eliminating[J]. Special Steel Technology, 2014, 20(3):1.)</br>[53] 赵东伟, 包燕平, 王敏, 等. GCr15轴承钢中Ti(CN)析出行为热力学分析和研究[J]. 特殊钢, 2012, 33:7.</br>(Zhao D W, Bao Y P, Wan M, et al. Study and analysis on thermodynamics of Ti(CN) precipitating behavior in bearing steel GCr15[J]. SPECIAL STEEL, 2012, 33:7.)</br>[54] 万雪峰, 孟劲松, 李德刚, 等. 帘线钢TiN夹杂物析出理论分析[C]//2008年洁净钢生产技术国际研讨会, 2008:171.</br>(Wan X F, Meng J S, Li D G, et al. Theoretical analysis of TiN inclusion precipitated in tire cord steel[C]// International symposium on clean steel production technology, 2008:171.)</br>[55] 郭大勇, 耿继双, 王秉喜, 等. 帘线钢中钛夹杂形成的热力学分析[J]. 炼钢, 2011, 27(3):44.</br>(Guo D Y, Gen J S, Wang B X, et al. Thermodynamics analysis of TiN inclusion formation in tyre cord steel[J]. Steelmaking, 2011, 27(3):44.)</br>[56] 郭大勇, 任玉辉, 王秉喜, 等. 帘线钢中钛夹杂生长动力学研究[C]// 全国炼钢—连铸生产技术会. 2014.</br>(Guo D Y, Ren Y H, Wang B X, et al. Growth kinetics of TiN inclusion in tyre cord steel[C]// National conference of steel-continuous casting production technology. 2014.)</br>[57] 郭大勇, 曹亚丹, 耿继双, 等. 帘线钢中TiN夹杂形成热力学分析[C]// 第七届中国钢铁年会, 2009. </br>(Guo D Y, Cao Y D, Gen J S, et al. Thermodynamics analysis of TiN inclusion formation in tyre cord steel[C]// The 7th China Steel Conference, 2009.)</br>[58] 郭大勇, 马成 , 洪树利, 等. 过共析钢中TiN夹杂形成热力学分析[J]. 金属制品, 2010, 36(5):56.</br>(Guo D Y, Ma C, Hong S L, et al. Thermodynamics analysis of TiN inclusion formation in hypereutectoid steel[J]. Metal Products, 2010, 36(5):56.)</br>[59] 蒋跃东, 薛正良 , 吴杰, 等. 82A钢凝固过程中TiN夹杂析出热力学和动力学[J]. 武汉科技大学学报, 2010, 33(4):358.</br>(Jiang Y D, Xue Z L, Wu J, et al. Thermodynamics and dynamics of TiN precipitation during solidification of steel 82A[J]. Journal of Wuhan University of Science & Technology, 2010, 33(4):358.)</br>[60] Cai X F, Bao Y P, Wang M, et al. Investigation of precipitation and growth behavior of Ti inclusions in tire cord steel[J]. Metallurgical Research & Technology, 2015, 112(4):407.</br>[61] 李玉华, 郑建强, 林国强, 等. 帘线钢中钛夹杂物形貌和析出尺寸的计算[C]// 全国高品质特殊钢生产技术研讨会. 2011:1.</br>(Li Y H, Zheng J Q, Lin G Q, et al. Feature and caleulation of precipitation size on titatium inclusion in wire cord steel[C]// National seminar on high quality and special steel production technology. 2011:1.)</br>[62] 刘宏玉, 郑建强, 李玉华, 等. 帘线钢中Ti夹杂物研究[J]. 北京科技大学学报, 2010, 32(7):866.</br>(Liu H Y, Zheng J Q, Li Y H, et al. Investigation of Ti inclusions in tire cord steel[J]. Journal of University of Science & Technology Beijing, 2010, 32(7):866.)</br>[63] 雷家柳, 薛正良, 蒋跃东, 等. 碳含量对帘线钢凝固析出TiN夹杂的影响[J]. 材料与冶金学报, 2014, 13(2):125. </br>(Lei J L, Xue Z L, Jiang Y D, et al. Effect of carbon content on TiN inclusion precipitation in tire cord steel[J]. Journal of Materials & Metallurgy, 2014, 13(2):125.)</br>[64] 雷家柳, 薛正良. 帘线钢生产过程中钛含量的影响因素及控制[J]. 江苏大学学报(自然科学版), 2015, 36(6):728.</br>(Lei J L, Xue Z L. Influence factors and control of titanium content during tire cord steel production[J]. Journal of Jiangsu University (Natural Science Edition), 2015, 36(6):728.)</br>[65] 桂仲林, 王海洋, 腾力宏. 帘线钢LX72A夹杂物控制优化实践[J]. 上海金属, 2017, 39(5):90.</br> (Gui Z L, Wang H Y, Teng L H, et al. Optimization practice of inclusion control for LX72A tire cold steel[J]. SHANGHAI METALS 2017, 39(5):90.)</br>[66] 陈书浩, 王新华, 何肖飞, 等. 帘线钢中氮含量对TiN析出的影响[J]. 钢铁, 2012, 47(5):29.</br>(Chen S H, Wang X H, He X F, et al. Effects of nitrogen content on precipitation of Ti-N inclusions in tire cord steel[J]. Iron & Steel, 2012, 47(5):29.</br>[67] 易顺, 陶勇, 阮方, 等. 帘线钢凝固过程中钛和氮偏析及TiN夹杂尺寸计算[J]. 钢铁, 2016, 51(4):70.</br>(Yi S, Tao Y, Ruan F, et al. Ti and N segregation and size calculation of TiN inclusions in cord steel during solidification[J]. Iron & Steel, 2016, 51(4):70.)</br>[68] 石磊, 洪军, 李小明, 等. 帘线钢中钛夹杂的控制[J]. 钢铁研究, 2014, 42(1):50.</br>(Shi L, Hong J, Li X M, et al. Control of titanium inclusions in tire cord steel[J]. Research on Iron & Steel, 2014, 42(1):50.)</br>[69] 刘铁牛, 杨文, 张立峰. 帘线钢轧制和拉拔过程中夹杂物变形能力的研究[J]. 炼钢, 2018, 34(2):73.</br>(Liu T N, Yang W, Zhang L F. Investigation on the deformability of inclusions in tire cord steel during processes of hot-rolling and　cold-drawing[J]. Steelmaking, 2018, 34(2):73. )</br>[70] Yang W, Guo C, Zhang L, et al. Evolution of oxide inclusions in Si-Mn killed steels during hot-rolling process[J]. Metallurgical & Materials Transactions B, 2017, 48(5):2717.</br>[71] Zhang L, Guo C, Yang W, et al. Deformability of oxide inclusions in tire cord steels[J]. Metallurgical & Materials Transactions B, 2017, 49(2):1.</br>[72] 郝斌, 张晓娟, 苑少强. 铌、钛碳氮化物在微合金钢中的回溶及析出行为[J]. 金属热处理, 2014, 39(8):1. </br>(Hao B, Zhang X J, Yuan S Q. Dissolving and precipitation behavior of Nb-Ti carbonitrides in microalloyed steels[J]. Heat Treatment of Metals, 2014, 39(8):1-4.)</br>[73] 惠亚军, 潘辉, 李文远, 等. 1000MPa级Nb-Ti微合金化超高强钢加热制度研究[J]. 金属学报, 2017, 35(2):129. </br>(Hui Y J, Pan H, Li W Y, et al. Study on heating schedule of 1000 MPa grade Nb-Ti microalloyed ultra-high strength steel[J]. Acta Metallurgica Sinica, 2017, 35(2):129.)</br>[74] 苑少强, 梁国俐, 武会宾. 超低碳微合金钢中碳氮化物的溶解行为[J]. 材料热处理学报, 2011, 32(10):83.</br>(Yuan S Q, Liang G L, Wu H B. Dissolving behavior of carbonitrides in a ultra-low carbon microalloyed steel[J]. Transactions of Materials & Heat Treatment, 2011, 32(10):83.)</br>[75] 张京, 薛正良, 蒋跃东, 等. 帘线钢SWRH82A铸坯加热过程中钛夹杂的固溶[J]. 材料与冶金学报, 2014, 13(4):242.</br>(Zhang J, Xue Z L, Jiang Y D, et al. Solid solution of Ti inclusions during heating process for cast bloom of tire cord steel SWRH82A[J]. Journal of Materials & Metallurgy, 2014, 13(4):242.)</br>[76] 薛正良, 余晨帆, 邱龙武, 等. 过共析帘线钢中碳氮化钛夹杂的析出与固溶[J]. 重庆大学学报, 2015, 38(2):93.</br>(Xue Z L, Yu C F, Qiu LW, et al. Precipitation and solid solution of titanium carbonitride inclusions in hypereutectoid tire cord steel[J]. Journal of Chongqing University, 2015, 38(2):93.)</br>[77] Yu C F, Xue Z L, Jin W T. Precipitation and solid solution of titanium carbonitride inclusions in hypereutectoid tire cord steel[J]. Journal of Iron and Steel Research International, 2016, 23(4):338.</br>[78] 雷家柳. 过共析帘线钢中钛夹杂的析出机理及其控制[D]. 武汉科技大学, 2016.</br>(Lei J L. Mechanism of titanium inclusions precipitated in hypereutectoid tire cord steel and its control[D]. Wuhan University of Science and Technology, 2016.)</br>