|
|
|
| Distribution of reformed coke oven gas in a shaft furnace |
| Xin Jiang 1, Jia-xin Yu 1, Lin Wang2, Dong-wen Xiang 1, Qiang-jian Gao 1, Hai-yan Zheng 1, Feng-man Shen 1 |
| 1 School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China; 2 Department of Mechanical Engineering, Shenyang Institute of Engineering, Shenyang 110136, Liaoning, China |
|
|
|
|
Abstract In recent years, the reformed coke oven gas (COG) was proposed to be used as reducing gas in a shaft furnace. A mathematical model of gas flow based on the reformed COG was built. The effects of the pressure ratio of reducing gas to cooling gas (k) on the gas distribution in the shaft furnace were investigated. The calculation results show that k is an important operation parameter, which can obviously affect the gas distribution in the shaft furnace. The value of k should be compromised. Both too big and too small k values are not appropriate, and the most reasonable value for k is 1:1.33. Under this condition, the utilization coefficient of reducing gas, the utilization coefficient of cooling gas and the coefficient of upward gas are 0.94, 0.92 and 1.03, respectively. Based on the validation of physical experiments, the calculated values of the model agreed well with the physical experimental data. Thus, the established model can properly describe the reformed COG distribution in an actual shaft furnace.
|
|
|
|
|
|
| Cite this article: |
|
Xin Jiang,Jia-xin Yu,Lin Wang, et al. Distribution of reformed coke oven gas in a shaft furnace[J]. Journal of Iron and Steel Research International, 2020, 27(12): 1382-1390.
|
|
|
|
| [1] |
He‑ping Li, Sheng‑li Wu, Zhi‑bin Hong, Heng Zhou, Ming‑yin Kou. null[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(6): 617-623. |
| [2] |
Heng Zhou, Qin-fu Hou, Ming-yin Kou, Shun Yao, Sheng-li Wu . Discrete element method study of solid descending and residence properties in COREX shaft furnace with center gas supply device[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(7): 669-678. |
| [3] |
Xing-sheng Zhang, Zong-shu Zou, Zhi-guo Luo. Numerical simulation on characteristics of COREX shaft furnace with central gas distribution[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(6): 567-577. |
| [4] |
Jing Gu, Li Wang, De-hong Xia, Feng Zhang, Zhao-dong Qi, Wen-qing Ao. Experimental study and industrial demonstration on utilization of Fe, Ti and V from vanadium-bearing titanomagnetite ore sands[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(12): 1295-1303. |
| [5] |
Ran Wang, Zheng-gen Liu Man-sheng Chu Hong-tao Wang Wei Zhao Li-hua Gao. Modeling assessment of recovering iron from red mud by direct reduction: magnetic separation based on response surface methodology[J]. , 2018, 25(5): 497-505. |
| [6] |
Xue-feng She,*,Xiu-wei An,Jing-song Wang,Qing-guo Xue,Ling-tan Kong. Numerical analysis of carbon saving potential in a top gas recycling oxygen blast furnace[J]. Chinese Journal of Iron and Steel, 2017, 24(6): 608-616. |
|
|
|
|
2020, Vol. 27 
