|
|
Determination of activity interaction parameters of Nb in Fe–C–Nb melts at 1873 K |
Jie Zhang1, Da-ya Wang2, Bai-jun Yan1 |
1 State Key Laboratory of Advanced Metallurgy, Department of Physical Chemistry of Metallurgy, School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
2 Sinosteel Maanshan General Institute of Mining Research Co., Ltd., Ma’anshan 243000, Anhui, China |
|
|
Abstract The interaction parameters of Nb in Fe–C–Nb melts at 1873 K were measured using the chemical equilibrium method. The Fe–C melts were equilibrated with the CaO–MgO–Al2O3–NbO2 slags under a controlled oxygen potential for 24 h. In addition to acting as the protective gas, argon was adopted to control the oxygen potential. Based on the data obtained in the experiments, the activity interaction parameters were obtained by the multiple linear regression method. The first-order interaction parameters eCNb and eNbNb are determined to be - 0.035 and - 0.134, respectively. The second-order interaction parameters rCNb, rNb,CNb, and rNbNb are determined to be 0.011, - 0.0063, and 0.0023, respectively. The thermodynamic data obtained are more reliable than those in previous publications for the Fe–C–Nb system when the Nb content range was 0.92–4.62 wt.%.
|
Received: 25 March 2021
Published: 25 March 2022
|
|
|
|
Cite this article: |
Jie Zhang,Da-ya Wang,Bai-jun Yan. Determination of activity interaction parameters of Nb in Fe–C–Nb melts at 1873 K[J]. Journal of Iron and Steel Research International, 2022, 29(3): 403-407.
|
|
|
|
[1] |
GUO Wei, LONG Mu-jun , WU Jia-lu, ZHANG Hao-hao, AI Song-yuan, CHEN Deng-fu. Effect of solute partition coefficient and TiN precipitation on micro-segregation of 22MnB5 steel[J]. Iron and Steel, 2022, 57(3): 44-54. |
[2] |
JIANG Chang, WANG Zi-bo, WANG Yang, LU Heng-chang, MAN Ting-hui, ZHOU Lei. Continuous cooling transformation law of cold work hardening non-quenched and tempered steel[J]. Iron and Steel, 2022, 57(3): 91-96. |
[3] |
LI Jinbo,HAO Zhichao,JIN Guobing,SUN Junxi,CHENG Pengfei,CHEN Tao. Fracture analysis of 60Si2Mn spring steel in fatigue test[J]. PHYSICS EXAMINATION AND TESTING, 2022, 40(1): 35-. |
[4] |
Lei Zhang, Jian-liang Zhang, Xiang-yu Hu, Zheng-jian Liu, Heng-bao Ma, Ke-xin Jiao. Behavior of liquid passing through deadman: influence of slag/iron ratio and unburned pulverized coal[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(9): 1095-1104. |
[5] |
LIU Huasong1,DONG Yannan1,ZHENG Hongguang2,LAN Peng1,LIU Xiangchun2,ZHANG Jiaquan1. Influence of Nb microalloying on grain size of austenite in hightemperature carburized gear steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2021, 33(8): 828-838. |
[6] |
Ming-jun Zhong, Ke-lu Wang, Shi-qiang Lu, Xin Li, Xuan Zhou, Rui Feng. Hot deformation behavior and process parameters optimization of Ti– 6Al–7Nb alloy using constitutive modeling and 3D processing map[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(7): 862-873. |
|
|
|
|