|
|
|
| Structural optimization and design of purging plug for improving its service performance |
| Fang-guan Tan1,2, Sheng-li Jin3, Zhu He1,2, Ya-wei Li1,2 |
| 1 The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, Hubei, China 2 National-Provincial Joint Engineering Research Center of High Temperature Materials and Lining Technology, Wuhan University of Science and Technology, Wuhan 430081, Hubei, China 3 Chair of Ceramics, Montanuniversitaet Leoben, Leoben 8700, Austria |
|
|
|
|
Abstract Purging plug with slits is widely used in the secondary refining process, and its service life determines the downtime and production efficiency. To achieve a good performance in service life, optimizing the geometric structure of the slit, which can alleviate the stress concentration around the slit, was employed using the finite plate model. Furthermore, the performance of the purging plugs with different shapes of slits in the refining effect was investigated by conducting the water model experiments. The numerical simulation results showed that the appropriate shapes of slits could alleviate the stress concentration phenomena. In the water model experiment, the mixing time of the purging plug with circular slits is lesser than that of the purging plug with rectangular slits when the gas flow is less than 6.02 L/min. Compared with the rectangular slits, the circular slits are detrimental to smaller and well-distributed bubbles. Thus, the inclusion removal rate of the purging plug with circular slits is approximately 10% larger than that of the purging plug with the rectangular slits.
|
|
|
|
|
|
| Cite this article: |
|
Fang-guan Tan,Sheng-li Jin,Zhu He, et al. Structural optimization and design of purging plug for improving its service performance[J]. Journal of Iron and Steel Research International, 2022, 29(4): 628-635.
|
|
|
|
| [1] |
Wei Liu, Shu-feng Yang, Jing-she Li, Feng Wang, Hong-bo Yang. Numerical model of inclusion separation from liquid metal with consideration of dissolution in slag[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(11): 1147-1153. |
| [2] |
Najib Alia, Mika Pylvanainen, Ville-Valtteri Visuri, Volker John, Seppo Ollila. Vibrations of a laboratory-scale gas-stirred ladle with two eccentric nozzles and multiple sensors[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(10): 1031-1040. |
| [3] |
H. Gonzalez,J.A. Ramos-Banderas,E. Torres-Alonso,G. Solorio-Diaz,C.A. Hernández-Bocanegra,. Multiphase modeling of fluid dynamic in ladle steel operations under non-isothermal conditions[J]. Chinese Journal of Iron and Steel, 2017, 24(9): 888-900. |
| [4] |
Shu-guo ZHENG,Miao-yong ZHU,Ye-lian ZHOU,Wang SU. Flow Characteristics and Inclusion Removal in a Ten-strand Continuous Casting Tundish: Physical Modelling and Industrial Trials[J]. Chinese Journal of Iron and Steel, 2016, 23(2): 92-97. |
| [5] |
Shu-guo ZHENG,Miao-yong ZHU. Modelling Effect of Circulation Flow Rate on Inclusion Removal in RH Degasser[J]. Chinese Journal of Iron and Steel, 2016, 23(12): 1243-1248. |
| [6] |
A R Alaei;H Edris;E Shirani. Upward Molten Flow for Optimization of Fluid Flow in Continuous Casting Tundish[J]. Chinese Journal of Iron and Steel, 2010, 17(11): 29-33. |
|
|
|
|
2022, Vol. 29 
