|
|
|
| Leaching process of phosphorus and iron from steelmaking slag into malic acid solution |
| Ning-ning Lv1,2, Chang Su1,2, Hui Kong1,2, Hai-chuan Wang1,2, Yuan-chi Dong1,2 |
1 Key Laboratory of Metallurgical Emission Reduction and Resources Recycling, Ministry of Education, Anhui University of Technology, Ma’anshan 243002, Anhui, China
2 School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan 243002, Anhui, China |
|
|
|
|
Abstract In order to remove phosphorus element from steelmaking slag and decrease iron loss, malic acid was selected as the leaching agent to dissolve steelmaking slag. Firstly, the influences of different factors, such as malic acid concentration, slag particle size, temperature, liquid/solid ratio and stirring speed, on the leaching ratios of phosphorus and iron were studied. Then, the kinetics for the leaching process of phosphorus was analyzed. The results showed that the leaching ratios of phosphorus and iron increase significantly with increasing the malic acid solution concentration and liquid/solid ratio. When the concentration of malic acid solution increases up to 0.01492 mol/L, about 80% phosphorus can be dissolved, and iron leaching ratio is less than 17%. In addition, decreasing slag particle size can obviously increase the leaching ratio of phosphorus. However, temperature and stirring speed have no significant effect on the dissolution of phosphorus and iron. The leaching kinetics of phosphorus follows the unreacted shrinking core model. Diffusion through product layer is the rate-limiting step of the leaching process, and the corresponding apparent activation energy is determined to be 3.32 kJ/mol. Finally, a semi-empirical kinetic equation was established.
|
|
Received: 21 February 2021
Published: 25 June 2022
|
|
|
|
| Cite this article: |
|
Ning-ning Lv,Chang Su,Hui Kong, et al. Leaching process of phosphorus and iron from steelmaking slag into malic acid solution[J]. Journal of Iron and Steel Research International, 2022, 29(6): 951-960.
|
|
|
|
| [1] |
Hong-tao Wang, Man-sheng Chu, Ji-wei Bao, Zheng-gen Liu, Hong-ming Long. Non-isothermal reduction process analysis of iron-bearing burden with charging iron coke hot briquette under simulated blast furnace conditions[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(5): 741-750. |
| [2] |
Kai-xiao Zhou, Wen-hui Lin, Jian-kun Sun, Jiang-shan Zhang, De-zheng Zhang, Xiao-ming Feng, Qing Liu. Prediction model of end-point phosphorus content for BOF based on monotone-constrained BP neural network[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(5): 751-760. |
| [3] |
Guang-hua Wang, Yan-xiang Li. Development of new ductile iron with super-high thermal conductivity and elongation[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(3): 462-473. |
| [4] |
Min Gan, Wang Shu, Zhi-yun Ji, Zhi-an Zhou, Xiao-hui Fan, Bing Hu, Guo-jing Wang, Yuan Zhu, Ya-fei Sun. Control of nitrogen oxides emission by selective non-catalytic reduction in preheating section during iron ore pellets production[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(2): 215-222. |
| [5] |
Lei Zhang, Jian-liang Zhang, Xiang-yu Hu, Zheng-jian Liu, Heng-bao Ma, Ke-xin Jiao. Behavior of liquid passing through deadman: influence of slag/iron ratio and unburned pulverized coal[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(9): 1095-1104. |
| [6] |
Wen-zhui Wei, Kai-ming Wu, Jing Liu, Lin Cheng, Xian Zhang. Initiation and propagation of localized corrosion induced by (Zr, Ti, Al)-Ox inclusions in low-alloy steels in marine environment[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(4): 453-463. |
|
|
|
|
2022, Vol. 29 
