|
|
Developing laterite nickel ore leaching residue as sustainable blast furnace charge |
Qing-yu Tang1,2, Kai-jia Wu1,2, Min Gan1,2, Xiao-hui Fan1,2, Zeng-qing Sun1,2, Hao Lv1,2, Guo-jing Wong1,2 |
1 School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, Hunan, China 2 National Engineering Laboratory for High Efficiency Recovery of Refractory Nonferrous Metals, Changsha 410083, Hunan, China |
|
|
Abstract A kind of leaching residue generated during high pressure acid leaching of laterite nickel ore is creatively prepared as blast furnace charge for ironmaking. Results show that the briquettes with uniform shape, compressive strength higher than 72.3 N/pellet, and cracking temperature over 400 ℃ can be obtained by the non-binder briquetting with water content of 12.2 wt.% and pressure of 30 MPa. After preheating at 975 ℃ for 12 min and roasting at 1225 ℃ for 15 min, the strength of the roasted briquettes can reach 2815 N/pellet, and the iron grade is 59.27 wt.%. And the sulfur content can be simultaneously reduced to 0.067 wt.%. The obtained briquettes achieve adequate reducibility index, reduction degradation index, reduction swelling index, softening and melting temperatures, which are suitable for blast furnace ironmaking. The results show that this method cannot only effectively treat the leaching residue to reduce the risk of environmental pollution, but also realize the utilization of leaching residue.
|
|
|
|
|
Cite this article: |
Qing-yu Tang,Kai-jia Wu,Min Gan, et al. Developing laterite nickel ore leaching residue as sustainable blast furnace charge[J]. Journal of Iron and Steel Research International, 2022, 29(11): 1760-1770.
|
|
|
|
[1] |
Bi-wen Yang, Yi-hang Hu, San-ping Liu, Xue-dong Zhang, Chao-zhen Zheng, Hai-bei Wang. Influence of desulfurization slag containing oxides of vanadium and titanium on semi-steel pre-desulfurization[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(6): 939-950. |
[2] |
Yan-yu Zhao, Li-feng Zhang, Wei Chen, Shu-sen Cheng, Ying Ren. Kinetic modeling on hot metal desulfurization with mechanical stirring[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(5): 719-724. |
[3] |
Yi-fan Wang, Yu-dong Zhang, Hong-ming Long, Li-xin Qian, Yun-fei Luo, Ru-fei Wei. Low-temperature oxidation behavior and mechanism of semi-dry desulfurization ash from iron ore sintering flue gas[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(9): 1075-1081. |
[4] |
Lin-cheng Liu, Hai-bin Zuo, Wen-guo Liu, Zhi-qiang Xu. Preparation of calcium ferrite by flue gas desulfurization gypsum[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(11): 1357-1365. |
[5] |
Feng Zhang, De-qing Zhu, Jian Pan, Zheng-qi Guo, Meng-jie Xu. Influence of basicity on metallurgical performances of fired superhigh-grade magnetite pellets in hydrogen-rich gases[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(10): 1212-1222. |
[6] |
Kun Wang, Yan Liu, Masamichi Sano, Ting-an Zhang. Bubble behavior in cylindrical and square vessels under centric mechanical stirring[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(10): 1243-1250. |
|
|
|
|