|
|
|
| Modeling flow stress and grain size of GCr15 bearing steel at hightemperature deformation near end of solidification |
| Rui-hao Li1, Hai-jun Li1, Ning Xiang1, Guo-dong Wang1, Li-juan Bai2 |
1 The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, Liaoning, China
2 HBIS Group Technology Research Institute, Shijiazhuang 050000, Hebei, China |
|
|
|
|
Abstract Hot-core heavy reduction rolling is an innovative technology for continuous casting billet at the end of solidification. The deformation characteristics of GCr15 bearing billet were investigated over the temperature range of 1000–1300 °C with the strain rate of 0.001–10 s-1 by the Gleeble 3800 thermo-mechanical simulator. Firstly, the true stress–strain data are calibrated by the friction correction method to acquire accurate parameters near the solidus. Then, the Laasraoui-type constitutive model and dynamic austenite grain size model are established by the thermal compression results and corrosion experimental results, and the predicted values of the experimental interval are obtained by using the models. Meanwhile, the accuracy of models is verified by comparing the predicted curves with the experimental data. Last but not the least, the dynamic parameters between solidus and liquidus are predicted by the two models, and the difficulty of experimental collecting near the melting point is solved.
|
|
Received: 02 August 2021
Published: 25 January 2023
|
|
|
|
| Cite this article: |
|
Rui-hao Li,Hai-jun Li,Ning Xiang, et al. Modeling flow stress and grain size of GCr15 bearing steel at hightemperature deformation near end of solidification[J]. Journal of Iron and Steel Research International, 2023, 30(1): 88-101.
|
|
|
|
| [1] |
FU Zhixiang1,2，YANG Gengwei1,2，XU Yaowen1,2，HU Zhuoli1,2，YIN Qilong1,2，ZHAO Gang1,2. Study on dynamic recrystallization behavior of hotrolled TRIP steel produced by CSP process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(6): 596-604. |
| [2] |
WANG Weicong， DU Huayun， HOU Lifeng， WEI Huan， LIU Xiaoda， WEI Yinghui . Hot deformation behavior of C-HRA-5 new austenitic heat resistant stainless steel [J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(5): 496-503. |
| [3] |
LI Zhen-tuan, QIN He-yong, TIAN Qiang, ZHANG Wen-yun, ZHAO Guang-pu. Effect of deformation parameters on dynamic recrystallization and γ′-phase of GH4742 superalloy[J]. Iron and Steel, 2022, 57(2): 117-126. |
| [4] |
QIU Guo-xing, BAI Chong, CAI Ming-chong, WANG Jian-li, LI Xiao-ming, CAO Lei. Strain compensation constitutive equation and hot processing map of RAFM steel[J]. Iron and Steel, 2022, 57(11): 157-166. |
| [5] |
WANG Xiaohui，LIU Zhenbao，LIANG Jianxiong，SUN Yongqing，WANG Changjun，YANG Zhiyong. Dynamic recrystallization behavior of Custom 450 high strength stainless steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2021, 33(7): 627-634. |
| [6] |
PAN Yi-qing, YIN Sheng, TIAN Qing-chao, PEI Xin-hua, LUO Ke-li. Carburizing behavior and microstructural characteristics of hot-rolled strip at surface sliver defects[J]. Iron and Steel, 2021, 56(7): 107-114. |
|
|
|
|
2023, Vol. 30 
