|
|
Fundamental research on recovering metals from hot-dip Zn–Al–Mg dross by supergravity separation |
Ren-sheng Chu1, Zhe Wang1, Xiao-xuan Deng2, Ning-jie Sun1, Cheng-liang Xu2, Zhan-cheng Guo1 |
1 State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China
2 Research Institute of Technology, Shougang Group Co., Ltd., Beijing 100043, China |
|
|
Abstract The dross generated in the hot-dip Zn–Al–Mg coating process is a valuable co-product, since it contains high quantities of recyclable alloy. A new method to recover Zn–Al–Mg alloy from the industrial Zn–Al–Mg dross was proposed using supergravity separation. The separation efficiency was analyzed as a function of gravity coefficient (G), separation time, and separation temperature. The separation of Zn–Al–Mg alloy from the dross can be achieved at G>100. The alloy content in the dross decreased gradually with an increase in the gravity coefficient, the separation time, and the separation temperature. The alloy ratio in the enriched dross decreased almost linearly as the gravity coefficient increased, and the recovery of Zn–Al–Mg alloy from the dross exceeded 78%; these results were consistent with the results of the FactSage software calculation. The purified alloy can be in-situ used in the hot-dip Zn–Al–Mg bath for production. The feasibility of supergravity separation as a promising process for efficiently recovering Zn–Al–Mg alloy from Zn–Al–Mg dross was thus demonstrated.
|
Received: 07 September 2022
Published: 25 July 2023
|
|
|
|
Cite this article: |
Ren-sheng Chu,Zhe Wang,Xiao-xuan Deng, et al. Fundamental research on recovering metals from hot-dip Zn–Al–Mg dross by supergravity separation[J]. Journal of Iron and Steel Research International, 2023, 30(7): 1324-1333.
|
|
|
|
[1] |
Jun-yi Xiang, Ming-shuai Luo, Xi Lu, Lu-wei Bai, Zhong-peng Zhu, Qing-yun Huang, Sheng-qin Zhang, Kun-peng Guo, Xue-wei Lv. Recovery of vanadium from vanadium slag by composite additive roasting–acid leaching process[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(7): 1426-1439. |
[2] |
Sai He, Lu Lin, Ya-qin Liu, Zhong-xiao Hou, Yan Lv, Wei Wu. Influence of temperature and Fe2O3 on phosphorus recovery from dephosphorization slag by reduction[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(4): 697-707. |
[3] |
Shuang-ping Yang, Jiang-han Li, Wen-bing Gao, Hai-jin Liu. Optimization of manganese-rich slag extraction from low-manganese ore smelting by response surface methodology[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(10): 1573-1582. |
[4] |
Dong Chen, Ya-nan Lv, Wei Zhao, Fei-bao Wu, Wei-ang Ying. Mechanism of high temperature reduction on iron carbide preparation with low-grade siderite[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(09): 1357-1367. |
[5] |
Hong-yu Tian, Zheng-qi Guo, Ruo-ning Zhan, Jian Pan, De-qing Zhu, Cong-cong Yang, Liao-ting Pan, Xue-zhong Huang. Upgrade of nickel and iron from low-grade nickel laterite by improving direct reduction-magnetic separation process[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(08): 1164-1175. |
[6] |
Hong-ming Long, Yu-dong Zhang, Tao Yang, Li-xin Qian, Zheng-wei Yu. A promising method to recover spent V2O5–WO3/TiO2 catalyst: treatment by vanadium–titanium magnetite sintering process[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(08): 1176-1184. |
|
|
|
|