|
|
|
| Analysis of coupling mechanism between roll system crossing and liner wear of hot strip mill |
| Jia-li Zheng1, Hua-gui Huang1, Guang-lu Song1, Zhen-yao Lei2, Jing-na Sun1, Shi-min Xu1 |
| 1 School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China 2 Equipment Department, Shougang Jingtang Iron & Steel Co., Ltd., Tangshan 063000, Hebei, China |
|
|
|
|
Abstract Non-design roll system crossing seriously affects the plate shape and rolling mill performance. The problem of roll system crossing caused by liner wear was studied. The finite element model of rolling mill was established to analyze the relationship between roll system crossing and liner wear. The wear of liner was measured by laser tracker. The range of roll system crossing angle was calculated by considering the amount of stand clearance obtained by numerical simulation. The wear surface morphology of liner was observed and the wear mechanism was analyzed. The liner wear experiment was carried out to analyze the wear amount of the liner. Finally, based on the Archard wear theory, the prediction model of the cross angle of the roll system and the wear amount of the liner was established. Because there are more uncertain factors in the field production, the prediction model cannot be considered one by one. Therefore, the predicted value is smaller than the actual wear value, but it still has great reference.
|
|
|
|
|
|
| Cite this article: |
|
Jia-li Zheng,Hua-gui Huang,Guang-lu Song, et al. Analysis of coupling mechanism between roll system crossing and liner wear of hot strip mill[J]. Journal of Iron and Steel Research International, 2023, 30(12): 2425-2435.
|
|
|
|
| [1] |
Pin-yong Zeng, Chun-guang Zuo, Xiao-yu Zhang, Wei Li. Impact wear properties of dissimilar joints between bainitic frogs and pearlite rails[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(1): 275-287. |
| [2] |
Xiao-bo Cui, Tian-long Liu, Zhi-bin Zheng, Zhi-qiang Guo, Kai-hong Zheng, Pei-xian Han. Effects of Ni content and tempering temperatures on microstructure and properties of medium-carbon cast steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(8): 1524-1536. |
| [3] |
Yu-xiao Liu, Yan-wu Dong, Zhou-hua Jiang, Yu-shuo Li, Wei Zha, Yao-xin Du, Shu-yang Du. XGBoost-based model for predicting hydrogen content in electroslag remelting[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(05): 887-896. |
| [4] |
Kai-xiao Zhou, Wen-hui Lin, Jian-kun Sun, Jiang-shan Zhang, De-zheng Zhang, Xiao-ming Feng, Qing Liu. Prediction model of end-point phosphorus content for BOF based on monotone-constrained BP neural network[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(5): 751-760. |
| [5] |
Run-feng Peng, Min Zhang, Yu-hang Li, Yue-long Yu, Ying-chun Guan, Zhun-li Tan. Microstructural development and wear properties analyses of Fe-based coatings on bainitic steel by laser cladding[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(4): 687-697. |
| [6] |
Zhi-ming Yan, Xue-wei Lv, Zu-shu Li. Physicochemical properties and structure of titania-containing metallurgical slags: a review[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(2): 187-206. |
|
|
|
|
2023, Vol. 30 
