|
|
|
| A defect recognition model for cross-section profile of hot-rolled strip based on deep learning |
| Tian-lun Li1, Wen-quan Sun1, An-rui He1, Jian Shao1, Chao Liu1, Ai-bin Zhang1, Yi Qiang2, Xiang-hong Ma3 |
| 1 National Engineering Research Center for Advanced Rolling and Intelligent Manufacturing, University of Science and Technology Beijing, Beijing 100083, China 2 Academy of Machinery Science and Technology, Beijing 100044, China 3 School of Engineering and Applied Science, Aston University, Birmingham B4 7ET, UK |
|
|
|
|
Abstract The cross-section profile is a key signal for evaluating hot-rolled strip quality, and ignoring its defects can easily lead to a final failure. The characteristics of complex curve, significant irregular fluctuation and imperfect sample data make it a challenge of recognizing cross-section defects, and current industrial judgment methods rely excessively on human decision making. A novel stacked denoising autoencoders (SDAE) model optimized with support vector machine (SVM) theory was proposed for the recognition of cross-section defects. Firstly, interpolation filtering and principal component analysis were employed to linearly reduce the data dimensionality of the profile curve. Secondly, the deep learning algorithm SDAE was used layer by layer for greedy unsupervised feature learning, and its final layer of back-propagation neural network was replaced by SVM for supervised learning of the final features, and the final model SDAE_SVM was obtained by further optimizing the entire network parameters via error back-propagation. Finally, the curve mirroring and combination stitching methods were used as data augmentation for the training set, which dealt with the problem of sample imbalance in the original data set, and the accuracy of cross-section defect prediction was further improved. The approach was applied in a 1780-mm hot rolling line of a steel mill to achieve the automatic diagnosis and classification of defects in cross-section profile of hot-rolled strip, which helps to reduce flatness quality concerns in downstream processes.
|
|
|
|
|
|
| Cite this article: |
|
Tian-lun Li,Wen-quan Sun,An-rui He, et al. A defect recognition model for cross-section profile of hot-rolled strip based on deep learning[J]. Journal of Iron and Steel Research International, 2023, 30(12): 2436-2447.
|
|
|
|
| [1] |
Tian-yi Xie, Cai-dong Zhang, Quan-lin Zhou, Zhi-qiang Tian, Shuai Liu, Han-jie Guo. TSC prediction and dynamic control of BOF steelmaking with state-of-the-art machine learning and deep learning methods[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(1): 174-194. |
| [2] |
Guang-da Bao, Ting Wu, Duo-gang Wang, Xiao-bin Zhou, Hai-chuan Wang. Multi-model coupling-based dynamic control system of ladle slag in argon blowing refining process[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(05): 926-936. |
| [3] |
Gong-hao Lian, Qi-hao Sun, Xiao-ming Liu, Wei-miao Kong, Ming Lv, Jian-jun Qi, Yong Liu, Ben-ming Yuan, Qiang Wang. Automatic recognition and intelligent analysis of central shrinkage defects of continuous casting billets based on deep learning[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(05): 937-948. |
| [4] |
Long Zhang, Sai-fei Yan, Jun Hong, Qian Xie, Fei Zhou, Song-lin Ran. An improved defect recognition framework for casting based on DETR algorithm[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(05): 949-959. |
| [5] |
Xuan-dong Wang, Nan Li, Hang Su, Hui-min Meng. Prior austenite grain boundary recognition in martensite microstructure based on deep learning[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(05): 1050-1056. |
| [6] |
Bing Han, Wei-hao Wan, Dan-dan Sun, Cai-chang Dong, Lei Zhao, Hai-zhou Wang. A deep learning-based method for segmentation and quantitative characterization of microstructures in weathering steel from sequential scanning electron microscope images[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(5): 836-845. |
|
|
|
|
2023, Vol. 30 
