|
|
Microstructure and corrosion behaviors of friction stir-welded Q235 low-carbon steel joint |
Hong-duo Wang1, Zhi-yong Zhou1, Kuai-she Wang2, Wen Wang2, Peng Han2, Cheng-wen Zhang1, Yong-xin Lu1, Guang Li1, Yi-di Lu1, Xiao Li1, Yan-ming Liu1, Xiao-yong Zhang1 |
1 School of Materials Science and Engineering, Xi’an Shiyou University, Xi’an 710065, Shaanxi, China 2 School of Metallurgical Engineering, National and Local Joint Engineering Research Center for Functional Materials Processing, Xi’an University of Architecture and Technology, Xi’an 710055, Shaanxi, China |
|
|
Abstract Friction stir welding (FSW) was used to prepare Q235 low-carbon steel joint, and the microstructure of different zones of the joint was characterized. The electrochemical corrosion behavior of different macroscopic zones of the joint was evaluated in 3.5 wt.% NaCl solution. The results showed that the retreated-side heat-affected zone (HAZRS) and the advanced-side heat-affected zone (HAZAS) did not undergo phase transformation during FSW, and their microstructures were similar to those of the base material (BM), which was mainly composed of blocky ferrite and pearlite. The retreatedside thermo-mechanical affected zone (TMAZRS), the stirring zone (SZ), and the advanced-side thermo-mechanical affected zone (TMAZAS) underwent phase transformation, and the microstructure was mainly composed of proeutectoid ferrite and pearlite. The order of the corrosion resistance of different micro-zones from high to low was: HAZRS[ BM[HAZAS[TMAZRS[SZ[TMAZAS. The corrosion mechanism for BM, HAZRS, and HAZAS was mainly the dissolution of ferrite. By contrast, the corrosion mechanism for TMAZRS, SZ, and TMAZAS was mainly galvanic corrosion between proeutectoid ferrite and pearlite.
|
|
|
|
|
Cite this article: |
Hong-duo Wang,Zhi-yong Zhou,Kuai-she Wang, et al. Microstructure and corrosion behaviors of friction stir-welded Q235 low-carbon steel joint[J]. Journal of Iron and Steel Research International, 2023, 30(12): 2517-2530.
|
|
|
|
[1] |
Shuai Liu, Han-jie Guo. A short review of antibacterial Cu-bearing stainless steel: antibacterial mechanisms, corrosion resistance, and novel preparation techniques[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(1): 24-45. |
[2] |
Cheng Lu, Wan-lin Wang, Chen-yang Zhu, Jie Zeng, Xin-yuan Liu, Hua-long Li. Evolution of interfacial heat transfer, contact behavior and microstructure during sub-rapid solidification of molten steel with different hydrogen contents[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(1): 215-223. |
[3] |
Yan-xin Qiao, Zhi-bin Zheng, Hao-kun Yang, Jun Long, Pei-xian Han. Recent progress in microstructural evolution, mechanical and corrosion properties of medium-Mn steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(8): 1463-1476. |
[4] |
Yong-kuan Zhou, Jia-jie Kang, Guo Jin, Xiu-fang Cui, Jie Zhang, Guo-zheng Ma, Zhi-qiang Fu, Li-na Zhu, Ding-shun She, Yu-yun Yang. Effect of vacuum heat treatment on microstructure and corrosion behavior of HVOF sprayed AlCoCrFeNiCu high entropy alloy coatings[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(8): 1550-1561. |
[5] |
Wen-jiao Zhang, Yan-li Wang. Performance of TiC coating prepared by in situ conversion of organic carbon film on 316L bipolar plate[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(8): 1562-1573. |
[6] |
Yang Liu, Jian-hua Liu, Yang He. Microstructure evolution in large billet during reduction pretreatment based on laboratory experiments[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1244-1257. |
|
|
|
|