|
|
|
| Strip flatness prediction of cold rolling based on ensemble methods |
| Wu-quan Yang1, Zhi-ting Zhao1, Liang-yu Zhu1, Xun-yang Gao1, Li Wang1 |
| 1 School of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Shenyang 110142, Liaoning, China |
|
|
|
|
Abstract Aiming at the problem of insufficient prediction accuracy of strip flatness at the outlet of cold tandem rolling, the prediction performance of strip flatness based on different ensemble methods was studied and a high-precision prediction ensemble model of strip flatness at the outlet was established. Firstly, based on linear regression (LR), K nearest neighbors (KNN), support vector regression, regression trees (RT), and backpropagation neural network (BPN), bagging, boosting, and stacking ensemble methods were used for ensemble experiments. Secondly, three existing ensemble models, i.e., random forest, extreme random tree (ET) and extreme gradient boosting, were used to conduct experiments and compare the results. The research shows that bagging, boosting, and stacking three ensemble methods have the most significant improvement in the prediction accuracy of the regression trees model, which is increased by 5.28%, 6.51%, and 5.32%, respectively. At the same time, the stacking ensemble method improves both the simple model and the complex model, and the improvement effect on the simple base model is the greatest, which is 4.69% higher than that of the base model KNN. Comparing all of the ensemble models, the stacking ensemble model of level-1 (ET, AdaBoost-RT, LR, BPN) paired with level-2 (LR) was discovered to be the best model (EALB-LR) and can be further studied for industrial applications.
|
|
Received: 17 December 2022
Published: 25 January 2024
|
|
|
|
| Cite this article: |
|
Wu-quan Yang,Zhi-ting Zhao,Liang-yu Zhu, et al. Strip flatness prediction of cold rolling based on ensemble methods[J]. Journal of Iron and Steel Research International, 2024, 31(1): 237-251.
|
|
|
|
| [1] |
Tian-yi Xie, Cai-dong Zhang, Quan-lin Zhou, Zhi-qiang Tian, Shuai Liu, Han-jie Guo. TSC prediction and dynamic control of BOF steelmaking with state-of-the-art machine learning and deep learning methods[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(1): 174-194. |
| [2] |
Ze-dong Wu, Xiao-chen Wang, Quan Yang, Dong Xu, Jian-wei Zhao, Jing-dong Li, Shu-zong Yan. Deformation resistance prediction of tandem cold rolling based on grey wolf optimization and support vector regression[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(09): 1803-1820. |
| [3] |
Yu-xiao Liu, Yan-wu Dong, Zhou-hua Jiang, Yu-shuo Li, Wei Zha, Yao-xin Du, Shu-yang Du. XGBoost-based model for predicting hydrogen content in electroslag remelting[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(05): 887-896. |
| [4] |
Ran Liu, Zhi-feng Zhang, Xin Li, Xiao-jie Liu, Hong-yang Li, Xiang-ping Bu, Jun Zhao, Qing Lyu. Hot metal quality monitoring system based on big data and machine learning[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(05): 915-925. |
| [5] |
Xiao-ya Huang, Biao Zhang, Qiang Tian, Hong-hui Wu, Bin Gan, Zhong-nan Bi, Wei-hua Xue, Asad Ullah, Hao Wang. Machine learning study on time–temperature–transformation diagram of carbon and low-alloy steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(05): 1032-1041. |
| [6] |
Jin-shan CHEN, Chang-sheng LI. Prediction and Control of Thermal Scratch Defect on Surface of Strip in Tandem Cold Rolling[J]. Chinese Journal of Iron and Steel, 2015, 22(2): 106-114. |
|
|
|
|
2024, Vol. 31 
