|
|
|
| Investigating effect of coke porosity on blast furnace performance based on multi-physical fields |
| Ji Chen1, Zhao Lei1, Zhe Yao2, Li Wang2, Qiang Ling1, Ping Cui1 |
| 1 Anhui Province Key Laboratory of Coal Clean Conversion and High Valued Utilization, School of Chemistry and Chemical Engineering, Anhui University of Technology, Ma’anshan 243002, Anhui, China 2 Shanxi Academy of Printing Technology Research Institute Co., Ltd., Xi’an 710077, Shaanxi, China |
|
|
|
|
Abstract Reducing coke use is an effective measure to reduce carbon emission and energy consumption in the blast furnace (BF) ironmaking. Essentially, BF is a high-temperature moving bed reactor, where complex physical transformations coupled with complicated reactions occur. This makes it challenging to investigate the factors determining BF performance with the conventional method. A multi-physical field coupling mathematical model of BF was thus developed to describe its mass and heat transfer as well as its intrinsic reactions. Then, the proposed model was validated with the production data. Under coupling conditions, influences of dominating reactions on BF performance (temperature distribution, gas distribution, iron formation reaction, and direct reduction degree) were revealed. The results indicated that coke combustion, indirect reduction, and direct reduction of iron ore mainly took place nearby the shaft tuyere, cohesive zone, and dripping zone, respectively. Besides, the rate of coke solution loss reaction was increased with the rising coke porosity in the cohesive zone. Considering the effect of coke porosity on the efficiency and stability of BF, the coke porosity of 0.42 was regarded as a reasonable value.
|
|
|
|
|
|
| Cite this article: |
|
Ji Chen,Zhao Lei,Zhe Yao, et al. Investigating effect of coke porosity on blast furnace performance based on multi-physical fields[J]. Journal of Iron and Steel Research International, 2024, 31(02): 357-367.
|
|
|
|
| [1] |
Xiao-jie Liu, Yu-jie Zhang, Xin Li, Zhi-feng Zhang, Hong-yang Li, Ran Liu, Shu-jun Chen. Prediction for permeability index of blast furnace based on VMD–PSO–BP model[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(3): 573-583. |
| [2] |
Gang Wang, Jun Xu, Kun He, Zhong-ping Zou, Hao Bai. Heat distribution model under hydrogen-rich low-carbon conditions in blast furnace[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(3): 584-594. |
| [3] |
Hong-bin Dai, Jian Miao, Jia-xin Lin. Grain refinement of 5A06 aluminum alloy welds caused by tungsten inert gas welding arc characteristics under Ar–He alternating gas supply conditions: a coupled method of water-cooled copper plate test/numerical simulation[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(3): 767-777. |
| [4] |
Han-jie Guo. Physicochemical principles of hydrogen metallurgy in blast furnace[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(1): 46-63. |
| [5] |
Zi-han Wang, Jing Guo, Han-jie Guo1 Bin Li. Thermodynamic and experimental study of high-temperature roasting of blast furnace gas ash for recovery of metallic zinc and iron[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(1): 108-120. |
| [6] |
Zhi-gang Que, Jin-ming Shi, Xian-bin Ai. Combustion mechanism of benzene in iron ore sintering process: experimental and simulation[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(1): 195-203. |
|
|
|
|
2024, Vol. 31 
