1.Shanghai Key Laboratory of Modern Metallurgy and Material Processing, Shanghai University, Shanghai 200072,China 2. School of Materials and Metallurgy, Inner Mongolia University of Science and Technology, Baotou 014010,Inner Mongolia, China
Abstract：Abstract:Mathematical simulation was carried out to investigate application of two sub-merged nozzles of CC process in twin-roll strip casting flow distribution system by FLUENT software. The ratio of outlet area to inlet area of nozzle (S),the angle between center line of outlet and horizontal direction (α) and the level distance between two nozzles (L) on metal stream distribution uniformity and level fluctuation in distributor were analyzed .The results show that the effect of α is significant while the effect of S and L are not. The optimal structural parameters of nozzle were found when α value was 0°，L value was 800 mm and S value is 1.1.
收稿日期: 2012-01-11
出版日期: 2012-09-26
引用本文:
阮飞，张捷宇，吴广新，刘智宇，马婕，殷天. 双辊薄带连铸分配器的模拟[J]. 中国钢铁期刊网, 2012, 31(5): 10-15.
RUAN Fei1,ZHANG Jie-yu1,WU Guang-xin1,LIU Zhi-yu2,MA Jie1,YIN Tian1. Simulation Investigation of Nozzle for Twin-Roll Strip Casting Process. Chinese Journal of Iron and Steel, 2012, 31(5): 10-15.
2012, Vol. 31 
