保护渣渣圈形成长大机理及影响因素研究现状

doi:10.13228/j.boyuan.issn1005-4006.20200078

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (21270 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要结晶器保护渣是一种重要的功能材料,对保证连铸过程顺行及提高铸坯质量起着重要作用,但在连铸过程中,保护渣容易在结晶器内壁上黏结,形成渣圈。过大的渣圈会削弱保护渣的控制传热和润滑作用,容易使铸坯表面缺陷增多,甚至造成漏钢事故。从宏观和微观两方面综述了国内外对渣圈形成长大机理的研究成果,并对渣圈在结晶器壁上的黏结情况进行了分析,总结了影响渣圈形成长大的因素,同时指出了现有研究中的不足,为以后的工作提供了参考。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	作者相关文章
	蒋文波
	文光华
	江婧
	唐萍

关键词 ：保护渣, 渣圈, 微观结构, 形成机理, 影响因素

Abstract：Mold flux is an important functional material, which plays an important role in ensuring the smooth running of continuous casting process and improving the quality of the slab. However, during continuous casting, mold flux is easy to adhere to the inner wall of the mold to form a slag rim. The oversized slag rim will weaken the function of controlling heat transfer and lubrication of the slag, which will easily increase the surface defects of the slab and even cause breakouts.The research results of the formation and growth mechanism of the slag rim at home and abroad are reviewed from the macroscopic and microscopic aspects, and the adhesion condition of the slag rim on the mold wall is analyzed, and the factors affecting the formation and growth of the slag rim are summarized. Meanwhile,it points out the deficiency of the existing research and provides reference for the future work.

Key words： mold flux slag rim microstructure mechanism of formation affecting factor

收稿日期: 2020-07-06

引用本文:

蒋文波, 文光华, 江婧, 唐萍. 保护渣渣圈形成长大机理及影响因素研究现状[J]. 连铸, 2021, 40(2): 7-13. JIANG Wen-bo, WEN Guang-hua, JIANG Jing, TANG Ping. Research status on mechanism of formation and growth of slag rim and affecting factors. CONTINUOUS CASTING, 2021, 40(2): 7-13.

链接本文:

http://www.chinamet.cn/Jweb_lz/CN/10.13228/j.boyuan.issn1005-4006.20200078 或 http://www.chinamet.cn/Jweb_lz/CN/Y2021/V40/I2/7

[1]	Mills K C,Fox A B. The role of mould fluxes in continuous casting—so simple yet so complex[J]. ISIJ International,2003,43(10):1479.
[2]	Mimura Y,山口福吉,高橋隆治,et al. Heat flux hysterisis in continuous casting mold:study on the mold powder technology in continuous casting XI[J]. Tetsu to Hagane,1984,70(4):146.
[3]	Kishi T,Nagano Y,Nakano T. Effect of carbon on flux melting in continuous casting:Study on the mold powder technology in continuous casting XV[J]. Tetsu to Hagane,1985,71(4):250.
[4]	Takeuchie E,Brimacombe J K. The formation of oscillation marks in the continuous casting of steel slabs[J]. Metallurgical and Materials Transactions:B,1984,15(3):93.
[5]	Kromhout J A. Mould powders for the high speed continuous casting of steel[D]. Delft:Delft University of Technology,2011.
[6]	Mills K C,Däcker C Å.The Casting Powders Book[M]. Switzerland:Springer International Publishing,2017.
[7]	王新月,席常锁,卢军辉,等. 影响板坯连铸产生渣圈的因素[J]. 炼钢,2010,26(2):53.
[8]	任磊,张立峰,王强强,等. 304不锈钢连铸过程中结晶器渣圈形成机制[J]. 钢铁,2016,51(8):35.
[9]	吴杰,刘振清. 连铸结晶器保护渣渣圈的研究[J]. 包头钢铁学院学报,2001,20(3):266.
[10]	王爱兰,刘平,陈建新. 浅析连铸结晶器保护渣渣圈[C]//第十四届全国炼钢学术会议文集. 重庆:中国金属学会,2006:532.
[11]	闫威,陈伟庆,郑宏光. 无磁钢20Mn23AlV保护渣液渣和渣圈性能变化对连铸的影响[J]. 特殊钢,2013,34(1):45.
[12]	王雷. 大圆坯连铸结晶器渣圈分析及改善[J]. 现代冶金,2017,45(3):33.
[13]	迟景灏,甘永年. 连铸保护渣[M]. 沈阳:东北大学出版社,1993.
[14]	Perrot C,Pontoire J N,Marchionni C,et al. Several slag rims and lubrication behaviours in slab casting[C]//Proceedings of 5th European Continuous Casting Conference. Paris:La Metallurgia Italiana,2005:36.
[15]	Marschall I,Xia G M,Kölbl N. Slag rim formation of two mould powders used for casting of construction steel[J]. BHM Bergund Hüttenmännische Monatshefte,2018,163(1):23.
[16]	朱立光,王杏娟.连铸保护渣理论与实践[M]. 北京:冶金工业出版社,2015.
[17]	Marschall I,Kölbl N. Comparison of the slag rim formation of two different mould powders[C]// Proceedings of the Materials Science and Technology Conference. Houston:ASM International,2010:1591.
[18]	张磊,翟冰钰,王万林. 高铝钢连铸用非反应型保护渣的研究进展[J]. 江西冶金,2019,39(2):7.
[19]	何升平,陈阳,潘伟杰,等. CaO-Al2O3基低反应性保护渣熔化及流动特性的成分控制区域研究[J].钢铁研究学报,2020,32(9):771.
[20]	李殿明. 连铸结晶器保护渣应用技术[M]. 北京:冶金工业出版社,2006.
[21]	张延大. 硅灰石的合成及其在帘线钢精炼中的应用[J]. 中国非金属矿工业导刊,2014(1):13.
[22]	曾建华. 高碳钢大方坯连铸用保护渣的研究[D]. 重庆:重庆大学,2003.
[23]	谢兵,甘永年,吴居福. 连铸结晶器保护渣配炭量及配炭方式的研究[J]. 钢铁研究学报,1990,2(1):5.
[24]	段大福. 炭质材料对保护渣烧结性能的影响[J]. 耐火材料,2004,38(5):339.
[25]	温亚磊. 连铸保护渣烧结性能和熔化速度的实验研究[D]. 重庆:重庆大学,2016.
[26]	Kim J J,Kim S K,Lee Y D,et al. Application of mold thermal monitoring system of improving slab surface quality at POSCO stainless steel works[C]//Proceedings of 17th Process Technology Conference. Warrendale:Iron and Steel Society,2000:1009.
[27]	Mazumdar D,Guthrie R I L. Hydrodynamic modeling of some gas injection procedures in ladle metallurgy operations[J]. Metallurgical and Materials Transactions:B,1985(16):83.
[28]	ZHOU L J,WANG W L,MA F J,et a1. A kinetic study of the effect of basicity on the mold fluxes crystallization[J]. Metallurgical and Materials Transactions:B,2012,43(2):354.
[29]	ZHU C Y,HAN W D,LIU C J,et a1. Crystallization temperature and crystallization ratio of mold flux[J]. Journa1 of Iron and Steel, International,2005,12(6):23.
[30]	陈俊孚,黄建阳,万恩同,等. 碱度对含钴包晶钢保护渣传热性能的影响[J]. 连铸,2016(2):17.
[31]	胡志豪. 包晶钢连铸结晶器保护渣的设计与应用[J]. 中国金属通报,2019(10):244.
[32]	王杏娟,樊亚鹏,朱立光,等. 碱度对连铸保护渣结晶率的响[J]. 特殊钢,2017,38(2):6.
[33]	朱先飞,文光华,蒲大志,等. 稳态导热下连铸保护渣固态渣膜有效导热系数的研究[J]. 连铸,2018(2);25.
[34]	Däcker C A,Glaes M,Andersson S P,et al. Influence of slag rim formation on initial solidification of stainless steel[C]//Proceedings of 6th Eur. Conference on Continuous Casting. Milan:Associazione Italiana di Metallurgia,2008:731.
[35]	Kromhout J A,Schimmel R C. Understanding mould powders for high-speed casting[J]. Ironmaking and Steelmaking,2016(29):249.
[36]	朱苗勇. 钢的精炼过程数学物理模型[M]. 北京:冶金工业出版社,1998.
[37]	朱苗勇. 新一代高效连铸技术发展思考[J].钢铁,2019,54(8):21.