Abstract:The continuous casting metallurgical process is very complex and accompanied by high temperature. It is difficult to observe by using the traditional research methods such as human eye method and physical experiment method, but the numerical simulation technology can make up for this deficiency.The finite element software ANSYS is widely used in continuous casting for its accuracy, safety and reliability. The research status of ANSYS in continuous casting was introduced, application of ANSYS in ladle, tundish, mould, secondary cooling zone and air cooling zone has been discussed in detail. Finally, in order to combine ANSYS with continuous casting better, the development trends of ANSYS in the continuous casting was also pointed out.
Sengupta J, Yavuz M M. Nozzle design for ArcelorMittal Dofasco's No. 1 continuous caster for minimizing sliver defects[J].Iron and Steel Technology, 2011, 8(7):39.
Ebina K, Fujii K, Shimono S, et al. Development of the hard reduction method in the No.3 bloom caster at Kobe works, Kobe Steel[J].Revue De Métallurgie, 1992, 89(9):783.
[14]
Rodrigues E F, Medeiros E B, Figueira R M. Heat loss and liquid steel flow in metallurgical ladles during holding period in continuous casting[J].Begel House Inc, 1997:1.
[15]
Anwar M E, Megahed G M, Bedewy M K, et al. Simulation of fluid flow and heat transfer in thin slab casting process[C]// The 9th International Mining, Petroleum, and Metallurgical Engineering Conference (MPM), Egypt: Cairo University, 2005.
[16]
Bielnicki M, Jowsa J, Cwudziński A. Multiphase numerical model of molten steel and slag behavior in the continuous casting mould[J].Archives of Metallurgy and Materials, 2015, 60(1):257.
[17]
Trindade L B, Nadalon J, Contini A C, et al. Modeling of solidification in continuous casting round billet with mold electromagnetic stirring (M-EMS)[J].Steel Research International, 2017, 88(4):1600319.
[18]
Srinivas P S, Mishra D K, Kulkarni A B, et al. Investigation of vortex flow patterns at the meniscus in a water caster mould[J].Canadian Metallurgical Quarterly, 2020, 59(2): 211.
Kowitwarangkul P, Kamonrattanapisud M, Juntasaro E, et al. CFD simulation of molten steel flow with isothermal condition in the continuous casting tundish[J].Applied Science and Engineering Progress, 2016, 9(2): 71.
Warzecha P, Hutny A, Warzecha M, et al. Optimization of steel flow in the tundish by modifying its working area[J].Archives of Metallurgy and Materials, 2016, 61(4):2071.
Novak J S, Benasciutti D, Bona F D, et al. Thermo-mechanical finite element simulation and fatigue life assessment of a copper mould for continuous casting of steel[J].Procedia Engineering, 2015, 133:688.
Chakraborty S, Ganguly S, Talukdar P. Determination of optimal taper in continuous casting billet mould using thermo-mechanical models of mould and billet[J].Journal of Materials Processing Technology, 2019, 270:132.
Androsenko M, Kulikova E, Osipova O. Improvement in billets quality from billet caster by roller suspension of secondary cooling zone stiffening[J].MATEC Web of Conferences, 2018, 224:02048.