Abstract:In order to reduce the probability of slag rolling and improve the removal ability of inclusions, the internal structure of multi-strand tundish in a steel plant was optimized by physical simulation and numerical simulation. The results show that the elevation angle of the diversion hole has a great influence on the flow field and temperature field in the tundish. The improved retaining wall uses 25 ° elevation diversion holes to reduce the maximum temperature difference of each flow from 5.2 ℃ to 2.4 ℃. The smaller elevation angle of the diversion hole is beneficial to the removal of inclusions, and the flow uniformity at the elevation angle of 25 ° is better. Increasing the dam height is also conducive to the floating of inclusions. The recommended dam height is 650 mm. In addition, it is recommended to keep the pouring height above 100 mm to eliminate the adverse effect of slag entrapment.
López-Ramirez S, Palafox-Ramos J, Morales R D, et al. Modeling study of the influence of turbulence inhibitors on the molten steel flow, tracer dispersion, and inclusion trajectories in tundishes[J]. Metall Mater Trans B,2001,32(4):615.
[2]
ZHONG L C,WANG M A,CHEN B Y,et al.Flow control in six-strand billet continuous casting tundish with different configurations[J].Iron Steel Res Int,2010,17(7):7.
[3]
Cwudziński A.Numerical,physical,and industrial experiments of liquid steel mixture in one strand slab tundish with flow control devices[J].Steel Res Int,2014,85(4):623.
[4]
Kumar A, Mazumdar D, Koria S C.Modeling of fluid flow and residence time distribution in a four-strand tundish for enhancing inclusion removal[J].ISIJ Int,2008,48(1):38.
Sahay S K, De T K, Basu D S, et al. Strand performance improvement through use of asymmetric baffles in tundish of six strand billet caster at DSP[J]. Iron and Steelmaker (I and SM), 2001, 28(7): 71.