|
|
Brief Introduction of Large Section Caster’s Alignment of Containing Rollers |
LI Wan-guo,WANG Jian-wei,ZOU Zhong-sheng,BAI Guo-lin |
Continuous Casting Department, CISDI Shanghai Engineering Co., Ltd., Shanghai 200940,China |
|
|
Abstract The alignment of large section caster’s containing rollers is the fundamental precondition to prevent leakage and guarantee products quality of continuous casters, different type of casters has different type of alignment equipments, however, all of them have similar idea of process in common. The basic idea of caster’s rollers alignment process and typical alignment equipments were introduced for the references of readers.
|
Received: 02 December 2011
Published: 22 May 2012
|
|
|
|
[1] |
LI Hua-gang. Design and application of electromagnetic stirring roll for slab continuous casting machine[J]. CONTINUOUS CASTING, 2022, 41(3): 56-64. |
[2] |
ZHOU Gan-shui, ZHANG Hai-yang, NING Shu-guang, SUN Jun, CHEN Yang, XIAO Hai-jian. Application of online hot width adjustment in four slab casters at FENGNAN[J]. CONTINUOUS CASTING, 2022, 41(3): 76-82. |
[3] |
WANG Yong, YANG Shu-feng, LI Jing-sheng, SU Rui-xian, YANG Jing-bo, ZHANG Fu-jun. Causes and control measures of corner transverse cracks in fine blanking steel continuous casting billet[J]. CONTINUOUS CASTING, 2022, 41(1): 49-55. |
[4] |
WANG Ya-tao, ZHU Xiao-yong, YAN Jian-wu. Strategy analysis of secondary cooling water distribution for lab caster[J]. CONTINUOUS CASTING, 2022, 41(1): 67-71. |
[5] |
YUE Zhi-kun. Fault analysis and modification of flame-cutting engine for continuous casting slab[J]. CONTINUOUS CASTING, 2021, 40(3): 54-58. |
[6] |
SUN Yun-peng, WANG Fu-hai, CHEN Lin-quan. Calculation and practice of steam emission in secondary cooling chamber of continuous caster[J]. CONTINUOUS CASTING, 2021, 40(3): 69-72. |
|
|
|
|