|
|
Application of Mold Powder in Continuous Casting Machine |
ZHONG Yun-tao1,LI Qiang2,3 |
1. CERI, Beijing 100176,China 2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China 3.Baotou Iron and Steel Group, Baotou 014010,Nei Monggol,China |
|
|
Abstract Mold powder is a very significant and critical material and takes a key role during casting. The main functions of the mold powder are to play insulation, prevent re-oxidation, control heat transfer of liquid steel, and lubricate shell. It is a key material to promote the development of continuous casting technology, and ensure the smooth process of continuous casting and quality of casting. In view of its importance, various physical and chemical properties of mold powder, are detailed analyzed combined with steel types and cast section and other conditions, systematic analysis on the impact of performance of mold powder and how to choose the correct mold powder are also discussed.
|
Received: 19 April 2013
Published: 25 July 2013
|
|
|
|
[1] |
Fan Qian, Hua-long Li, Wen-gang Yang, Hai-rong Guo, Guo-qi Liu, Hong-xia Li, Bei-yue Ma. Corrosion resistance of BN–ZrO2 ceramics with different additives by molten steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(7): 1101-1109. |
[2] |
ZHANG Xiang,XIE Qinghua,NI Peiyuan,LI Ying. Flow behavior of molten steel in SEN during fullnozzle selfswirling flow continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 629-638. |
[3] |
ZHAO Xianjiu1,2,ZHANG Jieyu2,3,LI Chuanjun2,3. Analysis of formation mechanism about Ca-Mg-Al spineltype inclusions in cold thin rolling sheet[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 664-671. |
[4] |
SHANG Ting-rui, WANG Wei-ling, KANG Ji-bai, ZHU Miao-yong, LUO Sen. In situ observation of solidification under transient and average cooling rate of 20CrMnTi continuous casting[J]. Iron and Steel, 2022, 57(7): 73-85. |
[5] |
CHEN Bin, LI Hai-bo, JI Chen-xi, LIU Guo-liang, ZHOU Hai-chen. Influence of casting parameters on level fluctuations and its industrial application[J]. Iron and Steel, 2022, 57(7): 86-94. |
[6] |
KANG Yong-lin, ZHU Guo-ming, JIANG Min, WANG Guo-lian, LIU Peng-tao, XU Hai-wei, XIE Cui-hong, WEI Yun-fei, SHEN Kai-zhao, LIU Yang. Slab continuous casting by big roll heavy reduction and extra thick plate rolled by low compression ratio[J]. Iron and Steel, 2022, 57(7): 95-105. |
|
|
|
|