|
|
|
| Simulation of Solidification Microstructure of Continuous Casting Billet Under Electromagnetic Stirring |
| GENG Ming-shan1,2,HAN Qing-li1,2 |
1. Capital Engineering and Research Incorporation Limited, Beijing 100176, China
2. Beijing Cast-Rolling Engineering Research Center, Beijing 100176, China |
|
|
|
|
Abstract Simulation of solidification process of continuous cast billet was carried out with a ProCAST software, the solidification structures of continuous casting billet were simulated by CAFE model of ProCAST, and the solidification microstructure of continuous casting billet with or without mold electromagnetic stirring were comparatively simulated. It was found that the columnar zone is remarkably reduced and the ratio of central equiaxed grain increases obviously with electromagnetic stirring. Simulation results were evaluated by comparison between continuous casting billet with and without mold electromagnetic stirring. It was proved that the simulation result was consistent with experiment result.
|
|
Received: 23 April 2013
Published: 19 November 2013
|
|
|
|
|
|
| [1] |
Peng LAN Jia-Quan ZHANG. Numerical simulation of three-dimensional flow, heat transfer and solidification in slab continuous casting process[J]. , 2019, 38(6): 0-0. |
| [2] |
. Development and Application of Technology on Annular Gas Curtain in Slab Continuous Casting Tundish[J]. , 2019, 38(5): 0-0. |
| [3] |
Li YANG Feng Chai Xiao-bing LUO SU Hang Erwin Wosch Dieter Senk. Modelling and Simulation of heat transfer and solidification behavior of slab in continuous casting mould[J]. , 2019, 38(4): 0-0. |
| [4] |
Rong-Jun XU. A Brief Description of Baosteel No.3 Thick Slab Caster Revamp[J]. , 2019, 38(3): 0-0. |
| [5] |
TIAN Wei-guang，XU Jia-lin，LU Hai-fei，HE Jin-yuan，HUANG Ding-qin. Study on the width control of continuous casting slabs of 410S stainless steel[J]. , 2018, 37(4): 33-36. |
| [6] |
LIU Shu-guang，ZHAO Jian-ping，WANG Shuai，XU Wei，LIU Xin，YAO Hong-yong. Reasons and preventing measures of sticking in medium slab caster[J]. , 2018, 37(03): 31-34. |
|
|
|
|
2013, Vol. 32 
