|
|
Numerical simulation and design optimization of on-line induction heating process for billet steel rolling |
HE Hao1, WANG Qiang1, XIAO Hong1,2, PENG Peng1, MA Zhi-min1, LIAO Yun1 |
1. Technology Research and Development Department, Hunan Zhongke Electric Co., Ltd., Yueyang 414000, Hunan, China;
2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China |
|
|
Abstract Aiming at the popular uneven edge temperature during induction heating and rolling for billet castings, a coupled magnetic-thermal model has been presented, together with a following finite element analysis. Based on the industrial data from actual application, the validated model has been adopted for the optimization of the induction coils. It is shown that the magnetic flux density of the coils at the edge area has been improved with the new design, which is beneficial to reduce the temperature difference of rolling products. Accordingly, the possible edge crack due to uneven temperature during hot rolling process can be well controlled specially for alloyed steels.
|
Received: 27 August 2020
Published: 23 February 2021
|
|
|
|
[1] |
王学兵,张兴中,仇圣桃,等.直轧过程中铸坯感应补热技术的研究[J].热加工工艺,2019,48(9):105.
|
[2] |
王学兵. 方坯连铸直轧过程数值模拟研究与应用[D]. 北京:钢铁研究总院,2018.
|
[3] |
郭建龙,胡坤太,仇圣桃,等. 连铸方坯感应加热温度场数值模拟研究[J]. 热加工工艺,2015,44(5):72.
|
[4] |
陈庆安,张建宇,王艳辉,等.方坯直轧工艺中头尾温差消除过程数值模拟[J].中国冶金,2019,29(9):23.
|
[5] |
赵凯华,陈熙谋. 电磁学[M]. 2版.北京:高等教育出版社, 1985.
|
[6] |
Hedia H, Remacle J F. A sinusoidal magnetic field computation in nonlinear materials[J]. IEEE Transactions on Magnetics, 1995, 31(6):3527.
|
[7] |
肖宏,余超,刘剑,等.板坯连铸直轧感应补热有限元分析与试验[J].钢铁,2017,52(2):44.
|
[8] |
刘浩,陈立亮,周建新.基于ANSYS的连铸坯感应加热温度场数值模拟[J].特种铸造及有色合金, 2007, 27(4):259.
|
[9] |
赵敏.45钢坯锻前感应加热的有限元模拟分析[D].杭州:浙江工业大学,2006.
|
[10] |
孙建亮,邱丑武,彭艳,等.大型筒节感应加热过程电磁-热耦合有限元仿真[J].钢铁,2016,51(11):93.
|
[11] |
Renhart W, Stogner H, Preis K. Calculation of 3D eddy current problems by finite element method using either an electric or a magnetic vector potential[J]. IEEE Transactions on Magnetics, 2002, 24(1):122.
|
[12] |
CHEN H C, HUANG K H. Finite element analysis of coupled electromagnetic and thermal fields within a practical induction heating cooker[J]. International Journal of Applied Electromagnetics and Mechanics, 2008, 28(4):413.
|
[1] |
Bei-yue Ma, Xin-ming Ren, Zhi Gao, Fan Qian, Zhao-yang Liu, Guo-qi Liu, Jing-kun Yu, Gao-feng Fu. Influence of pre-synthesized Al2O3–SiC composite powder from clay on properties of low-carbon MgO–C refractories[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(7): 1080-1088. |
[2] |
YUAN Ji-bai, MA Zhi-min, YIN Pan, ZHANG Hua. Design of flow control device on 4-strand H-type double channels tundish with induction heating[J]. CONTINUOUS CASTING, 2021, 40(6): 85-90. |
[3] |
CHEN Xi-qing, XIAO Hong, WANG Pu, HE Hao, LAN Peng, ZHANG Jia-quan. Three-dimensional magneto-hydrothermal coupling model of twin-channel tundish with induction heating[J]. Iron and Steel, 2021, 56(6): 48-58. |
[4] |
XIONG Qiao-ling, AI Xin-gang, WANG Qiong, DU Bing, LIU Hai-xiao, NING Zhe. Mathematical simulation of impact zone volume on flow in inductively heated tundish[J]. CONTINUOUS CASTING, 2021, 40(5): 43-48. |
[5] |
ZHANG Han, DAI Chuan-min, LEI Hong, ZHANG Xiu-xiang. Numerical simulation for flow characteristics of molten steel in tundish with channel type induction heater[J]. CONTINUOUS CASTING, 2021, 40(5): 54-59. |
[6] |
XIAO Hong, QUAN Chong, XIAO Xiao-dan, YANG Hong, HU Lu. Development and industrial application of electromagnetic heating equipment for large-capacity tundish[J]. CONTINUOUS CASTING, 2021, 40(5): 108-113. |
|
|
|
|