|
|
Application research on hot mold width adjustment technology of the chamfered mould |
CHEN Ming-xin1, WANG Hong-feng2, YANG Xiao-jiang2 |
1. Science and Technology Information Department,Center Iron and Steel Research Institute, Beijing 100081, China; 2. Technology Innovation Department of HBIS Laoting Steel Co., Ltd., Tangshan 063606, Hebei, China |
|
|
Abstract Chamfered mold has greater risk than the conventional mould in the process of on hot mold width adjustment,because of the temperature and thickness of the shell at the corner are quite different from the conventional mould. This problem can be solved by controlling the inclusions, the cooling and supporting of narrow slab and optimizing the width adjustment mode etc.
|
Received: 30 October 2019
|
|
|
|
[1] |
王会玉,高琦,安领军,等.大倒角结晶器在线热调宽技术研究与应用[J].重型机械,2018(3):26.
|
[2] |
高琦,张小龙,杨拉道,等.结晶器在线热态调宽液压缸推力计算[J].铸造技术,2010,31(11):1464.
|
[3] |
蔡开科,孙彦辉,韩传基.连铸坯质量控制零缺陷战略[J].连铸,2011(S1):288.
|
[4] |
何新军,韩志伟,何小群,等.结晶器热调宽控制模型[J].冶金自动化,2017,41(2):45.
|
[1] |
Fan Qian, Hua-long Li, Wen-gang Yang, Hai-rong Guo, Guo-qi Liu, Hong-xia Li, Bei-yue Ma. Corrosion resistance of BN–ZrO2 ceramics with different additives by molten steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(7): 1101-1109. |
[2] |
ZHANG Xiang,XIE Qinghua,NI Peiyuan,LI Ying. Flow behavior of molten steel in SEN during fullnozzle selfswirling flow continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 629-638. |
[3] |
ZHAO Xianjiu1,2,ZHANG Jieyu2,3,LI Chuanjun2,3. Analysis of formation mechanism about Ca-Mg-Al spineltype inclusions in cold thin rolling sheet[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 664-671. |
[4] |
SHANG Ting-rui, WANG Wei-ling, KANG Ji-bai, ZHU Miao-yong, LUO Sen. In situ observation of solidification under transient and average cooling rate of 20CrMnTi continuous casting[J]. Iron and Steel, 2022, 57(7): 73-85. |
[5] |
CHEN Bin, LI Hai-bo, JI Chen-xi, LIU Guo-liang, ZHOU Hai-chen. Influence of casting parameters on level fluctuations and its industrial application[J]. Iron and Steel, 2022, 57(7): 86-94. |
[6] |
KANG Yong-lin, ZHU Guo-ming, JIANG Min, WANG Guo-lian, LIU Peng-tao, XU Hai-wei, XIE Cui-hong, WEI Yun-fei, SHEN Kai-zhao, LIU Yang. Slab continuous casting by big roll heavy reduction and extra thick plate rolled by low compression ratio[J]. Iron and Steel, 2022, 57(7): 95-105. |
|
|
|
|